AUDI A4 1995 B5 / 1.G Recaro Seats Owner's Manual
Manufacturer: AUDI, Model Year: 1995,
Model line: A4,
Model: AUDI A4 1995 B5 / 1.G
Pages: 35, PDF Size: 0.51 MB
AUDI A4 1995 B5 / 1.G Recaro Seats Owner's Manual
A4 1995 B5 / 1.G
AUDI
AUDI
https://www.carmanualsonline.info/img/6/899/w960_899-0.png
AUDI A4 1995 B5 / 1.G Recaro Seats Owner's Manual
Trending: battery, airbag off, tow, wiring, torque, belt, relay
Page 21 of 35
72-44
3 -
Bolts (2x)
4 -
Clip
Pa
ge 21 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Page 22 of 35
72-45
2-way lumbar support, removing and
installing
WARNING!
Before starting work on seats, connect VAS
5094 airbag adapter page 72
-9 .
1 -
Backrest frame
2 -
2-way lumbar support
- Remove seat page 72
-25
.
- Remove backrest upholstery page 74
-
22
.
- Disconnect harness connector for lumbar
support motor -5-.
- Remove bolts -4- (2x).
- Remove bolts -4- (2x).
3 -
Retaining hook
4 -
Bolts (2x)
5 -
Harness connector for lumbar support
motor
Pa
ge 22 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Page 23 of 35
72-46
Lumbar support motor with transmission,
removing and installing
WARNING!
Before starting work on seats, connect VAS
5094 airbag adapter page 72
-9 .
1 -
Lumbar support body
2 -
Foam pieces (2x)
If not available as a replacement part,
detach foam pieces from old motor and
attach to new motor
Pa
ge 23 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Page 24 of 35
72-47
3 -
Motor with transmission and Bowden
cable
- Remove seat page 72
-25
.
- Remove 2-way lumbar support page
72
-45
.
- Cut tie wraps -5- (2x).
- Push lumbar support body together.
- Pull Bowden cable -6- in direction of
arrow -A-.
- Detach Bowden cable -6- at pulley.
- Pull set pin -7- in direction of arrow -B-
out of bracket.
- Remove bolts -4- (2x).
4 -
Bolts (2x)
5 -
Tie wraps
6 -
Bowden cable
7 -
Set pin
Pa
ge 24 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Page 25 of 35
72-48
Backrest motor with transmission,
removing and installing
WARNING!
Before starting work on seats, connect VAS
5094 airbag adapter page 72
-9 .
Note:
Illustration only shows backrest.
1 -
Backrest frame
2 -
Backrest motor with transmission
Removing:
- Move seat fully up.
- Remove seat page 72
-25
.
- Remove trim panels page 72
-41
.
- Remove backrest upholstery page 74
-
22
.
- Using screwdriver, remove spring
washer -5- on backrest motor side (-B- in
illustration).
- Pull shaft out of backrest frame -1- far
enough so backrest motor -2- can be
removed.
-
Cut all tie wraps on backrest motor using
Pa
ge 25 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Page 26 of 35
diagonal cutter.
Pa
ge 26 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Page 27 of 35
72-49
- Disconnect harness connector -8-.
- Unbolt mounting screw of backrest motor
-5- from welded threaded bushing -6-.
- Remove backrest motor -2-.
Installing:
- Push shaft -3- through backrest motor -2-
and backrest frame -1-.
- Secure backrest motor -2- between two
plastic washers -7- using mounting screw
-5- on threaded bushing -6-.
- Tap locking washer -4- onto shaft -3-.
3 -
Shaft
4 -
Locking washer
5 -
Mounting screw
6 -
Threaded bushing
7 -
Plastic washers (2x)
8 -
Harness connector
Pa
ge 27 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Page 28 of 35
72-50
Motor for seat height adjustment,
removing and installing
WARNING!
Before starting work on seats, connect VAS
5094 airbag adapter page 72
-9 .
Note:
Ensure that bushings -4- are correctly seated in the
seat frame.
1 -
Seat frame
2 -
Seat height motor adjustment
Removing:
- Move seat fully up.
- Remove seat page 72
-25
.
- Remove seat cushion page 72
-32
.
- Disconnect harness connector -3-.
- Disconnect harness connector -3-
housing from seat frame.
- Using screwdriver, lift locking washer -5-
from shaft -6-.
- Remove motor -2-.
Installing:
Pa
ge 28 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Page 29 of 35
72-51
3 -
Harness connector for motor
4 -
Bushings (2x)
5 -
Locking washer
6 -
Shaft
Pa
ge 29 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Page 30 of 35
72-52
Headrest, removing and installing
- Press down on guide sleeves -2- from above.
- Press down slightly on headrest -1- to release catch.
- Pull headrest -1- up and off of backrest -3-.
Pa
ge 30 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Trending: radio, warning, relay, tow, airbag, lock, ECU