torque AUDI A4 1998 B5 / 1.G Suspension Workshop Manual

40-4


13 -
Guide link with hydraulic bushing
Removing and installing page 40
-97
Replace hydraulic bushing if leaking
page 40
-99

14 -
Self-locking nut
Always replace100 Nm (74 ft lb)
15 -
Wheel bearing housing Removing and installing on vehicles with
headlight range control page 40
-14

Removing and installing page 40
-54
Servicing page 40
-60
16 -
Splash shield
17 -
Collar bolt
Always replaceWhen tightening, vehicle must be standing
on its wheels
Tightening torques:M14: 115 Nm (85 ft lb) + 1/2-turn (180 )M16: 190 Nm (140 ft lb) + 1/2-turn (180 )
Pa
ge 5 of 14 Front axle com
ponents, locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.1

40-7


31 -
Bolt M8 x 25
Note different tightening torques Fig. 3
:
25 Nm (18 ft lb)75 Nm (55 ft lb)
32 -
Support for subframe
33 -
Self-locking nut Always replace80 Nm (59 ft lb) + 1/4-turn (90 )
34 -
Self-locking nut
Always replace90 Nm (66 ft lb) + 1/4-turn (90 )
35 -
Socket-head bolts
M8 x 48: 40 Nm (30 ft lb)M10 x 48: 80 Nm (59 ft lb)
36 -
Spacer plate
37 -
Drive axle with Constant Velocity (CV)
joint Removing and installing page 40
-17
Servicing page 40
-20
38 -
Drive axle with triple-rotor joint
Pa
ge 9 of 14 Front axle com
ponents, locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.1

40-10


Only ribbed bolts are installed from m.y. 1998 ; this bolt can also be
installed on older models. Fig. 3 Note different tightening torques
Bolt -A- not ribbed (arrow) tightening torque: 25 Nm (18 ft lb)Bolt -B- ribbed (arrow) tightening torque: 75 Nm (55 ft lb)
Pa
ge 14 of 14 Front axle com
ponents, locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.1