dashboard AUDI S3 2010 Owners Manual

Clear vision
Rear window wiper C\J
The wiper lever is also used to operate the rear window
wiper and the automatic wiper/washer function.
Fig. 62 Wiper leve r:
activating the rear
wi ndow wiper and
washer
T he rear window wiper and the automatic wiper/washer
functions are activated as follows:
Intermittent wiping
- Push the wiper lever forward towards the dashboard and
to the
first position ©=>fig. 62. The rear window wiper
wi ll wipe the window approx. every four seconds.
Automatic wiper/washer function
-Push the wiper leve r forward to the second stop, position
0, and hold it there for as long as you want the rear
wiper/washer to operate.
- Release the lever again. The wiper will keep running for
approx . four seconds.
Switching intermittent wiper action off
-Pull the lever all the way back to the original position.
& WARNING
Wiper blades are crucial for safe driving! Only in good condition
are they able to clear the windows properly to provide unre ­
stricted visibility . Worn or frayed wiper blades are a safety hazard!
~ page 65, "Replacing front wiper blades "
0 Note
In freezing or near freezing conditions :
• Always check that the wiper blades are not frozen to the glass
before you turn the wiper on. Loosen a wiper blade which is frozen
in place before operating the wiper to prevent damage to the wiper
blade or the wiper motor.
• Do not use the wiper to clea r a frosted window . Using the wipers
as a convenient ice scraper will destroy the wiper blades .
[ i ] Tips
For better rearward vision when parking, the rear window wiper is
automatically activated one time when the windshield wipers are
switched on and reverse gear is engaged. •
Service position
Replacing the windshield wiper blades is only possible
when you move the wiper arms into the service position. In
order to use the windsh ield wipers, the hood must be
completely closed. When there is a risk of frost, make sure
that the wiper blades are not frozen to the windshield.
- Switch the ignition on.