AUDI S4 1995 B5 / 1.G 01E Transmission Final Drive Flange Housing Remove And Install Workshop Manual

AUDI S4 1995 B5 / 1.G 01E Transmission Final Drive Flange Housing Remove And Install Workshop Manual S4 1995 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1296/w960_1296-0.png AUDI S4 1995 B5 / 1.G 01E Transmission Final Drive Flange Housing Remove And Install Workshop Manual

Page 1 of 7

AUDI S4 1995 B5 / 1.G 01E Transmission Final Drive Flange Housing Remove And Install Workshop Manual 39-81
 
  
Drive flange housing, removing 
and installing Assembly overview
 
1 - 
Bolt, 40 Nm 
2 - 
Front cross member 
3 - 
Bolt, 40 Nm 
4 - 
Final drive support 
5 - 
Drive flange housing 
6 - 
Rea

Page 2 of 7

AUDI S4 1995 B5 / 1.G 01E Transmission Final Drive Flange Housing Remove And Install Workshop Manual 39-82
      
Removing  
     
Rear final drive installed 
     
Special tools, testers and auxiliary items   
     Multipurpose tool VW 771 and 771/15
     Drip tray V.A.G 1306
     Universal support

Page 3 of 7

AUDI S4 1995 B5 / 1.G 01E Transmission Final Drive Flange Housing Remove And Install Workshop Manual 39-83
      
-  Remove heat shield above driveshaft.
     
-  Remove heat shield next to rear final drive.
    
-  Check whether there is a factory marking (paint spot) on driveshaft. If 
not, mark po

Page 4 of 7

AUDI S4 1995 B5 / 1.G 01E Transmission Final Drive Flange Housing Remove And Install Workshop Manual 39-84
      
-  Support final drive with transmission jack V.A.G 
1383 A. 
    
-  Unscrew bolts (arrows) on front cross member for rear final drive.
-  Detach front cross member.
-  Lower final drive

Page 5 of 7

AUDI S4 1995 B5 / 1.G 01E Transmission Final Drive Flange Housing Remove And Install Workshop Manual 39-85
 
    
-  Pull off drive flange with drive flange housing.
Pa
ge 5 of 7 Drive flan
ge housin
g, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp

Page 6 of 7

AUDI S4 1995 B5 / 1.G 01E Transmission Final Drive Flange Housing Remove And Install Workshop Manual 39-86
      
Installing  
      Installation is carried out in the reverse order; 
when doing this note the following:  
     
Note:  
     
After removing the driveshaft, it is important to 
clean an

Page 7 of 7

AUDI S4 1995 B5 / 1.G 01E Transmission Final Drive Flange Housing Remove And Install Workshop Manual 39-87
      
-  Align exhaust system free of stress.
     
       Repair Manual, 2.7 Liter V6 5V 
BiTurbo 
Engine Mechanical, Engine Code(s): APB, Repair Group 26
   
     
-  Top up gear oil in rear