light BMW X5 2008 E70 Service and warranty information
[x] Cancel search | Manufacturer: BMW, Model Year: 2008, Model line: X5, Model: BMW X5 2008 E70Pages: 46, PDF Size: 1.44 MB
Page 8 of 46
For the most current list of synthetic oils, please
contact your SAV center, or call BMW of North
America, LLC at 1 800 831-1117. You can also
obtain this information from our website,
www.bmwusa.com/.
BMW recommends that you check your engine
oil level whenever you add fuel to your vehicle. If
you need to add oil between oil changes and
are unable to obtain BMW High Performance
Synthetic Oil, Mobil 1 or another special oil on
the list, use a synthetic oil with an API rating of
SH or higher.
The following maintenance elements must be per-
formed at the mileage/time stated (time intervals
begin from the vehicle’s production date):
Brake Fluid Service: Change brake fluid every
two years, or when specified by CBS.
Oxygen Sensor Service: The oxygen sensor
deteriorates strictly on a mileage basis and
must therefore be replaced every
120,000 miles to maximize vehicle fuel econ-
omy and minimize exhaust pollution.
Spark Plug Service: Replace at
100,000 miles.
The engine coolant has a lifetime rating and
does not need to be changed except for sys-
tem repairs.
For your convenience, you may also wish to
have your BMW SAV center perform any neces-
sary operations to fulfill any state inspection
requirements in your area concurrent with the
maintenance elements specified above during
other repairs. Should you request more fre-
quent maintenance service, the cost of these
services will not be covered by the Mainte-
nance Program.
BMW has applied the most modern technologi-
cal advances not only to the design and produc-
tion of your vehicle, but also to computing of the
optimum maintenance interval for your type of
operations and driving style. Your BMW SAV
center has made a substantial investment in
unique BMW special service tools to enable
BMW factory trained service technicians to per-
form quality repairs on your BMW in minimal
time. Your service technician looks forward to
serving your every service need and to help
maximize your satisfaction with your BMW, its
longevity, and resale value.
Quality Certification I
For a detailed list of items inspected, refer to the
Quality Certification I form provided to the
Owner at time of delivery. A copy of the form is
on file at the selling BMW SAV center.
Maintenance summary
The CBS system will determine the requirement
for performance of the maintenance services
described on this and the following page. These
services may be required either individually or in
conjunction with other maintenance services.
Standard operations
Maintenance work:
Brief diagnostic test
Verify Check Control messages.
Check indicator and warning lights.
Reset CBS display.
Inspect tires, check tire pressure and reset
Tire Pressure Monitor.
Engine oil
Maintenance work:
Change the engine oil and oil filter. We rec-
ommend BMW High Performance 5W-30
Synthetic Oil P/N 07 51 0 017 866.
Replace ventilation microfilter.
After every 3rd engine oil change: Intake air
cleaner: replace air filter element (reduce
replacement interval in dusty operating
conditions).
Parking brake: Check function, burnish shoes.
4
Page 9 of 46
Front brake
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness, if
necessary replace at extra charge.*
Rear brake
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness, if
necessary replace at extra charge.*
Parking brake: Check condition, brake lining
thickness and function, if necessary replace
at extra charge.*
*Unless covered by Maintenance Program
Vehicle Check
Maintenance work:
Check operation of horn, headlight flasher
and hazard warning flashers.
Check instrument and control lighting and
heater/air-conditioning blower.
Check lighting system: turn signals, back-up,
license plate, interior (incl. map, reading
lights), glovebox, flashlight, luggage area
lights.
Safety belts: Check condition and function.
Check windshield wiper and washer jet
positions.
Body: Check for corrosion (except cavities).
Tires: Check tread depth, wear pattern, outer
condition, inflation pressure (also spare tire). If
necessary, correct pressure (also spare).
Reset Tire Pressure Monitor.
Battery: Check state of charge (magic eye)
and charge if required.
Power steering reservoir: Check fluid level.
Visually inspect all SRS airbag units for torn
covers, obvious damage or attachment of
stickers.
Rear-view mirrors, optional rear-view camera
Coolant: Check fluid level and concentration.
Windshield washer and intensive cleaning
system: Check protection level, fluid level, top
if necessary.
Brake system connections and lines: Check
for leaks, damage and correct positioning.
Underbody, incl. all visible parts (i.e. transmis-
sion, rear axle, fuel lines, exhaust system),
check for damage, leaks and corrosion.
Steering components: Check for clearance,
leaks, damage and wear.
Final Inspection: Road test with check of
–Brakes
– Steering
– Shock absorbers (visual)
– Transmission
Brake fluid
Maintenance work:
Replace brake fluid.
Spark plugs (not displayed in CBS)
Maintenance work:
Replace spark plugs at intervals of
100,000 miles.
Automatic Transmission (not shown
in CBS display)
Maintenance work:
Replace ATF at intervals of 100,000 miles.
5