change key battery CHRYSLER 300 SRT 2009 1.G Owners Manual

hold may not become active automatically. This is cell
phone-dependent. To bring the call back from hold, press
and hold the PHONE button until you hear a single beep.
Redial
•
Press the PHONE button to begin.
•After theReadyprompt and the following beep, say
Redial.
•The UConnectsystem will call the last number that
was dialed from your cellular phone.
NOTE:This may not be the last number dialed from the
UConnectsystem.
Call Continuation
Call continuation is the progression of a phone call on the
UConnectsystem after the vehicle ignition key has been
switched to OFF. Call continuation functionality avail-
able on the vehicle can be any one of three types:
•After the ignition key is switched to OFF, a call can
continue on the UConnectsystem either until the call
ends, or until the vehicle battery condition dictates
cessation of the call on the UConnectsystem and
transfer of the call to the mobile phone.
•After the ignition key is switched to OFF, a call can
continue on the UConnectsystem for a certain dura-
tion, after which the call is automatically transferred
from the UConnectsystem to the mobile phone.
•An active call is automatically transferred to the
mobile phone after the ignition key is switched to OFF.
UConnectSystem Features
Language Selection
To change the language that the UConnectsystem is
using:
•Press the PHONE button to begin.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

NOTE:
•You may not hear all of the tones due to cellular phone
network configurations. This is normal.
•Some paging and voice mail systems have system time
out settings that are too short and may not allow the
use of this feature.
Barge In - Overriding Prompts
The “Voice Recognition” button can be used when you
wish to skip part of a prompt and issue your voice
recognition command immediately. For example, if a
prompt is askingWould you like to pair a phone, clear
a...,you could press the VOICE RECOGNITION button
and say,Pair a Phoneto select that option without
having to listen to the rest of the voice prompt.
Turning Confirmation Prompts ON/OFF
Turning confirmation prompts off will stop the system
from confirming your choices (e.g., the UConnectsys-
tem will not repeat a phone number before you dial it).
•Press the PHONE button to begin.
•After theReadyprompt and the following beep, say
Setup Confirmations.The UConnectsystem will
play the current confirmation prompt status and you
will be given the choice to change it.
Phone and Network Status Indicators
If available on the radio and/or on a premium display
such as the instrument panel cluster, and supported by
your cellular phone, the UConnectsystem will provide
notification to inform you of your phone and network
status when you are attempting to make a phone call
using UConnect. The status is given for roaming, net-
work signal strength, phone battery strength, etc.
Dialing Using the Cellular Phone Keypad
You can dial a phone number with your cellular phone
keypad and still use the UConnectsystem (while dial-
ing via the cellular phone keypad, the user must exercise
caution and take precautionary safety measures). By
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Automatic Dimming Mirror................. 84
Automatic Door Locks...................29,30
Automatic Headlights.................... 135
Automatic Temperature Control (ATC)......... 294
Automatic Transaxle
Special Additives...................... 419
Automatic Transmission.............317,418,419
Adding Fluid......................419,440
Autostick............................ 321
Fluid and Filter Changes................. 419
Fluid Change......................... 419
Fluid Level Check...................... 418
Fluid Type........................... 440
Shifting............................. 317
Special Additives...................... 419
Automatic Transmission Limp Home Mode . . 320,321
Autostick............................. 321
Axle Fluid............................. 440
Axle Lubrication (Axle Fluid)............... 440Battery............................... 404
Emergency Starting..................... 385
Jump Starting......................... 385
Keyless Transmitter Replacement (RKE)....... 23
Location..........................386,404
Belts, Seat............................42,77
Body Mechanism Lubrication............... 407
B-Pillar Location........................ 343
Brake Assist System...................... 333
Brake Control System, Electronic............. 332
Brake Fluid............................ 440
Brake, Parking.......................... 327
Brake System........................329,416
Anti-Lock (ABS)....................329,332
Fluid Check.......................417,440
Master Cylinder....................... 417
Parking............................. 327
Warning Light.....................207,329
Brakes.............................329,416
INDEX 471
10