wiring CHRYSLER SEBRING SEDAN 2008 3.G Owners Manual

Maintaining Your Airbag System
WARNING!
•Modifications to any part of the airbag system
could cause it to fail when you need it. You could
be injured if the airbag system is not there to
protect you. Do not modify the components or
wiring, including adding any kind of badges or
stickers to the steering wheel hub trim cover or the
upper right side of the instrument panel. Do not
modify the front bumper, vehicle body structure,
or add aftermarket side steps or running boards.
•It is dangerous to try to repair any part of the
airbag system yourself. Be sure to tell anyone who
works on your vehicle that it has an airbag system.NOTE:
Perchlorate Material — special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
WARNING!
Do not attempt to modify any part of your advanced
airbag system. The airbag may inflate accidentally or
may not function properly if modifications are made.
Take your vehicle to an authorized dealer for any
advanced airbag system service. If your seat includ-
ing your trim cover and cushion needs to be serviced
in any way (including removal or loosening/
tightening of seat attachment bolts), take the vehicle
to your authorized dealer. Only manufacturer ap-
proved seat accessories may be used. If it is necessary
to modify an advanced airbag system for persons
with disabilities, contact your authorized dealer.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

•Trailer brakes are recommended for trailers over 1,000
lbs (450 kg) and required for trailers in excess of 2,000
lbs (907 kg).
CAUTION!
If the trailer weighs more than 1,000 lbs (450 kg)
loaded, it should have its own brakes, and they
should be of adequate capacity. Failure to do this
could lead to accelerated brake lining wear, higher
brake pedal effort, and longer stopping distances.
WARNING!
Do not connect trailer brakes to your vehicle’s hy-
draulic brake lines. It can overload your brake sys-
tem and cause it to fail. You might not have brakes
when you need them and could have an accident.
Towing any trailer will increase your stopping dis-
tance. When towing, you should allow for additional
space between your vehicle and the vehicle in front
of you. Failure to do so could result in an accident.
Towing Requirements — Trailer Lights & Wiring
Whenever you pull a trailer, regardless of the trailer size,
stoplights and turn signals on the trailer are required for
motoring safety.
Use a factory approved trailer harness and connector.
346 STARTING AND OPERATING

NOTE:Do not cut or splice wiring into the vehicles
wiring harness.
The electrical connections are all complete to the vehicle
but you must mate the harness to a trailer connector.
Towing Tips
Before setting out on a trip, practice turning, stopping,
and backing the trailer in an area located away from
heavy traffic.
Make sure all trailer and vehicle lights are working
properly — including hazard flashers.
4-Pin Connector
7-Pin Connector
STARTING AND OPERATING 347
5

Guide .............................. 341
Recreational.......................349,369
Weight .............................. 341
Towing Assistance....................... 102
Traction.............................. 292
TrailerTowing .......................... 338
Cooling System Tips.................... 349
Hitches............................. 340
Minimum Requirements................. 343
Trailer and Tongue Weight................ 342
Wiring .............................. 346
TrailerTowingGuide ..................... 341
TrailerWeight .......................... 341
Transaxle............................. 270
Additives............................ 405
Automatic.................... 13,264,270,403
Autostick............................ 275
Filter ............................... 405
Maintenance.......................... 403Operation........................... 270
Overdrive........................... 274
Selection of Lubricant................... 432
Transmission
Range Indicator....................... 174
Transmitter Battery Service
(Remote Keyless Entry).................... 25
Transmitter, Garage Door Opener (HomeLink) . . 144
Transmitter Programming
(Remote Keyless Entry).................... 25
Transporting Pets........................ 77
Tread Wear Indicators.................... 309
Trip Odometer.......................... 174
Trip Odometer Reset Button................ 176
Trunk Lid (Deck Lid)...................... 38
Trunk Release, Emergency................ 39,40
Trunk Release Remote Control............... 38
Turn Signals......................135,179,424
INDEX 469
10

LifeofTires .......................... 309
Load Capacity.....................299,300
Pressure Monitor System (TPMS)........... 314
Quality Grading....................... 449
Radial.............................. 306
Replacement......................... 310
Rotation............................. 313
Safety...........................294,303
Sizes ............................... 296
Snow Tires........................... 312
Spare Tire........................... 356
Spinning ............................ 308
Tread Wear Indicators................... 309
Tongue Weight/Trailer Weight.............. 342
Towing ............................... 338
24-Hour Towing Assistance............... 102
Disabled Vehicle....................... 368
Guide .............................. 341
Recreational.......................349,369Weight .............................. 341
Towing Assistance....................... 102
Traction .............................. 292
TrailerTowing .......................... 338
Cooling System Tips.................... 349
Hitches............................. 340
Minimum Requirements................. 343
Trailer and Tongue Weight................ 342
Wiring .............................. 346
TrailerTowingGuide ..................... 341
TrailerWeight .......................... 341
Transaxle............................. 270
Additives............................ 405
Automatic.................... 13,264,270,403
Autostick............................ 275
Filter ............................... 405
Maintenance.......................... 403
Operation........................... 270
Overdrive........................... 274
488 INDEX

INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle's electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle's electronic systems.