ESP FIAT 500L LIVING 2016 2.G Owner's Manual

WARNING
132)Changes or repairs to the electrical
system carried out incorrectly and without
due consideration for the technical
specifications of the system may lead to
malfunctioning and generate a fire hazard.
133)Halogen bulbs contain pressurised
gas. If they break, glass fragments could fly
everywhere.
WARNING
65)Halogen bulbs must be handled by
holding the metallic part only. Touching the
transparent part of the bulb with your
fingers may reduce the intensity of the
emitted light and even reduce the lifespan
of the bulb. In the event of accidental
contact, wipe the bulb with a cloth
moistened with alcohol and leave it to dry.
66)Where possible, it is advisable to
have bulbs changed at a Fiat Dealership.
Proper operation and direction of the
external lights are essential for driving in
safety and comply with law.
REPLACING FUSES
134) 135) 136) 137) 138) 139)67)
FUSE LOCATION
Fuses are grouped together in three
fuse boxes located in the engine
compartment, under the dashboard
and inside the luggage compartment.
ENGINE COMPARTMENT
FUSE BOX
To reach the fuses, undo the two
screws A fig. 138 and remove the cover
B as shown by the arrow.
IMPORTANT Before removing cover B
fig. 138 press and turn the two bayonet
screws A slowly anticlockwise (using
the flat tip screwdriver provided) until
unlocking them. This is shown by
the screw heads lifting.
136F0Y0030C
137F0Y0031C
138F0Y0071C
122
IN AN EMERGENCY

146)Whilst towing, remember that the
assistance of the brake servo and the
electric power steering is not available,
therefore greater force needs to be exerted
on the brake pedal and more effort is
required on the steering wheel. Do not use
flexible cables when towing and avoid
jerky movements. Make sure not to
damage parts in contact with the car while
towing. When towing the car, you must
comply with all specific traffic regulations,
both in terms of the towing device and
behaviour on the road. Do not start the
engine while being towed.
131
147)The front and rear tow hooks should
be used only for emergencies on the road.
The car may be towed for short distances
when a dedicated device is used in
compliance with the Highway Code (rigid
bar), and in order to move the vehicle
on the road in preparation for towing or
transport via a tow truck (on the Trekking
versions do NOT use the rear tow hook for
transport on a tow truck: use the front
tow hook). Tow hooks MUST NOT be used
to tow vehicles off the road or where there
are obstacles and/or for towing operations
using ropes or other non-rigid devices.
Respecting the above conditions, towing
must take place with two vehicles (one
towing, the other towed) aligned as much
as possible along the same centre line.WARNING
144)Before starting towing operations,
turn the ignition key to MAR and then
to STOP, without extracting it. The steering
column will automatically lock when the
key is removed, making it impossible
to turn the wheels.
145)Before tightening the ring, clean the
threaded housing thoroughly. Make sure
that the tow ring is fully fastened in the
housing before towing the vehicle.

Thousands of miles 9 18 27 36 45 54 63 72 81 90
Thousands of kilometres 15 30 45 60 75 90 105 120 135 150
Years12345678910
Change engine oil and replace oil filter
(2)●●●●●
Replace spark plugs (3)●●●●●
Change the brake fluid (4)●●●●●
Replace filter inside the pressure
regulator (LPG versions only)●
Replace paper filter (LPG in gaseous
state) (LPG versions only)●●●●●
(2) If the vehicle is used mainly on urban routes or the annual distance travelled is less than 10,000 km, the engine oil and engine oil filter must be changed every
year.
(3) For 0.9 TwinAir Turbo 105 HP versions, to guarantee correct operation and prevent serious damage to the engine, it is essential to proceed as follows: only use
spark plugs specifically certified for these engines; all spark plugs should be of the same type and brand (see the “Engine” paragraph in the "Technical
Specifications" section); strictly comply with the replacement intervals in the Scheduled Servicing Plan.
It is advisable to contact a Fiat Dealership for plug replacement.
(4) The brake fluid replacement has to be done every two years, irrespective of the mileage
138
SERVICING AND MAINTENANCE

Thousands of miles 12 24 36 48 60 72 84 96 108 120
Thousands of kilometres 20 40 60 80 100 120 140 160 180 200
Years12345678910
Replace air cleaner cartridge (6)●●●●●
Change the brake fluid (7)●●●●●
Replace passenger compartment
cleaner (6) (O) (●)O●O●O●O●O●
(6) If the vehicle is used in dusty areas, this cleaner must be replaced every 20,000 km.
(7) The brake fluid replacement has to be done every two years, irrespective of the mileage
(O) Recommended operations
(●) Mandatory operations
144
SERVICING AND MAINTENANCE

IDENTIFICATION
DATA
VIN PLATE
This is applied on the left side of the
luggage compartment fig. 157 (lift the
mat for access) and bears the following
data:
AName of manufacturer.
BType-approval number.
CVehicle type identification code.
DChassis serial number.
EMaximum permitted weight of vehicle
fully laden.
FMaximum permitted weight of vehicle
fully laden plus trailer.
GMaximum permitted weight on first
axle (front).
HMaximum permitted weight on
second axle (rear).
IEngine type.
LBodywork version code.
MSpare part number.
NCorrect value of smoke coefficient
(for diesel engines).
BODYWORK PAINT
IDENTIFICATION PLATE
This is fitted to the inside of the tailgate
and bears the following data fig. 158:
APaint manufacturer.
BColour name.
CFiat colour code.
DRespray and touch-up colour code.
CHASSIS MARKING
It is printed on the crossmember under
the passenger side seat and bears
the following data:
❒type of vehicle;
❒chassis serial number.
ENGINE MARKING
It is stamped on the cylinder block and
includes the type and the engine serial
number.
157F0Y0501C
158F0Y0003C
160
TECHNICAL SPECIFICATIONS

ENGINE
Versions 0.9 TwinAir Turbo Natural Power 0.9 TwinAir Turbo 105 HP
Type code 312A2000 199B6000
Cycle Otto Otto
Number and position of cylinders 2 in line 2 in line
Piston bore and stroke (mm) 80.5 x 86.0 80.5 x 86.0
Total displacement (cm³) 875 875
Compression ratio 10 ± 0.2 10 ± 0.2
METHANE PETROL
Maximum power (EC) (kW) 59 62.5 77
72
(*)
Maximum power (EC) (HP) 80 85 105
98(*)
corresponding engine speed (rpm) 5500 5500 5500
5750(*)
Maximum torque (EC) (Nm) 145 145 145
120(*)
Maximum torque (EC) (kgm) 14.8 14.8 14.8
12.2(*)
corresponding engine speed (rpm) 2500 2000 2000
1750(*)
Spark plugs NGK ILKR9G8 or NGK ILKR9H8 NGK ILKR9G8
FuelMethane for motor
vehiclesUnleaded petrol 95
RON (EN 228
Specification)Unleaded petrol 95 RON (EN 228 Specification)
Emission level Euro5/Euro6 Euro6
(*) Engine data with ECO button pressed
163

Versions 1.4 16V 95 HP 1.4 16V 120HP 1.4 16V 120 HP LPG
Type code 843A1000 940B7000 940B7000
Cycle Otto Otto Otto
Number and position of cylinders 4 in line 4 in line 4 in line
Piston bore and stroke (mm) 72.0 x 84.0 72.0 x 84.0 72.0 x 84.0
Total displacement (cm³) 1368 1368 1368
Compression ratio 11 ± 0,2 9.8 ± 0,2 9.8 ± 0,2
LPG PETROL
Maximum power (EC) (kW) 70 88 88 88
Maximum power (EC) (HP) 95 120 120 120
corresponding engine speed (rpm) 6000 5000 5000 5000
Maximum torque (EC) (Nm) 127 215 215 215
Maximum torque (EC) (kgm) 12.9 22 22 22
corresponding engine speed (rpm) 4500 2500 2500 2500
Spark plugs NGK DCPR7E-N-10 NGK IKR9J8 NGK IKR9J8
FuelUnleaded petrol 95
R.O.N. (EN 228
specifications)Unleaded petrol 95
R.O.N. (EN 228
specifications)LPG for motor
vehiclesUnleaded petrol 95
R.O.N. (EN 228
specifications)
Emission level Euro 6 Euro 6 Euro 6
164
TECHNICAL SPECIFICATIONS

Versions 1.3 16V 85HP Multijet 1.3 16V 95HP Multijet
Type code 199B4000 330A1000
Cycle Diesel Diesel
Number and position of cylinders 4 in line 4 in line
Piston bore and stroke (mm) 69.6 x 82.0 69.6 x 82.0
Total displacement (cm³) 1248 1248
Compression ratio 16.8 ± 0,4 16.8 ± 0,4
Maximum power (EC) (kW) 62 70
Maximum power (EC) (HP) 85 95
corresponding engine speed (rpm) 3500 3750
Maximum torque (EC) (Nm) 200 215
Maximum torque (EC) (kgm) 20.4 21.9
corresponding engine speed (rpm) 1500 1500
FuelDiesel for motor vehicles (EN 590
Specification)Diesel for motor vehicles (EN 590
Specification)
Emission level Euro 5 Euro 6
165

Versions 1.6 16V 105 HP MultiJet 1.6 16V 120 HP MultiJet
Type code 199B5000
955A3000(*)/ 940C1000(**)
Cycle Diesel Diesel
Number and position of cylinders 4 in line 4 in line
Piston bore and stroke (mm) 79.5 x 80.5 79.5 x 80.5
Total displacement (cm³) 1598 1598
Compression ratio 16.5 ± 0,4 16.5 ± 0,4
Maximum power (EC) (kW) 77 88
Maximum power (EC) (HP) 105 120
corresponding engine speed (rpm) 3750 3750
Maximum torque (EC) (Nm) 320 320
Maximum torque (EC) (kgm) 32.6 32.6
corresponding engine speed (rpm) 1750 1750
FuelDiesel for motor vehicles (EN 590
Specification)Diesel for motor vehicles (EN 590
Specification)
Emission level Euro 5 Euro5/Euro6
(*) Euro 5 versions
(**) Euro 6 versions
166
TECHNICAL SPECIFICATIONS

WEIGHTS
500L / 500L Trekking VERSIONS
Weights (kg) 0.9 TwinAir Turbo Natural Power 0.9 TwinAir Turbo 105HP
Unladen weight (with all fluids, fuel tank 90% full and
without optional equipment):1390
1260 / 1270(*)
Payload including the driver(**)505
560 / 545(*)
Maximum permitted loads(***)
1050 1050 – front axle:
– rear axle: 1000 1000
– total:
1895 1820 / 1815
(*)
Towable loads
– 1000
– braked trailer:
– non-braked trailer: – 400
Maximum load on roof: 60 60
Maximum load on ball joint (braked trailer): – 60
(*) Trekking versions
(**) If special equipment is fitted (sun roof, tow hitch, etc.) the unladen vehicle weight increases, thus reducing the specified payload in relationto the maximum
permitted loads.
(***) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or load platform within the maximum permitted loads.
180
TECHNICAL SPECIFICATIONS