ignition FIAT GRANDE PUNTO 2007 199 / 1.G Blue And Me User Manual
[x] Cancel search | Manufacturer: FIAT, Model Year: 2007, Model line: GRANDE PUNTO, Model: FIAT GRANDE PUNTO 2007 199 / 1.GPages: 106, PDF Size: 1.01 MB
Page 7 of 106
66
MEDIA PLAYER
With the Blue&Me™ Navmedia player
you can play, via the car sound system, the
digital audio files stored on a USB device by
simply connecting it to the USB port lo-
cated in the car.
In this way, while you are driving you can
play your favourite personal music collec-
tions.
The media player enables the following op-
erations:
❒Digital audio playback- you can play
all your digital audio files (.mp3, .wma,
.wav) or play a customized playlist (.m3u
or .wplformat).
❒Audio file selection by category-
you can play all audio files of a certain
category, e.g.: album, artist or genre.
❒Playback options- while playing tracks
you can select the following options: Play,
Stop, Next track, Previous track, Shuffle and
Loop track.Note
The media player does not support audio
files compressed with other formats (e.g.:
.aac) and DRM (Digital Right Management)
protected audio files. Non-supported au-
dio files that may be present on the USB
device will be ignored.
To use the media player, you have to sim-
ply connect (directly or by an extension
lead) your USB device to the car USB
port. Turning the ignition key to MAR,
Blue&Me™ Navwill start building your
media library. At the end of this operation
you can surf the whole library and scroll
its categories as required using the but-
tons on the steering wheel or voice com-
mands. Blue&Me™ Navwill then play
your selection via the car sound system.
THE NAVIGATION SYSTEM
The Blue&Me™ Navnavigation system
allows you to reach a required location
quickly and safely. You will be taken to
your destination by means of voice mes-
sages and pictogram instructions shown
on a the vehicle’s reconfigurable multi-
function display.The navigation system allows you to:
❒Enter a new destination- you can
enter the address of a desired destina-
tion, specifying the name of the desti-
nation street with the house number or
simply the town/city centre.
❒Navigate to a point of interest–
you can call up as a final destination a
point of interest selected from a cate-
gory list (e.g. hotels, restaurants, air-
ports, railway stations, authorised
workshops, etc.).
❒Trip information - Blue&Me™
Navis able to provide estimated time
of arrival and distance to a preset des-
tination. It also allows you to display
your car’s position (latitude, longitude
and number of GPS satellites received).
❒Recent destinations– you may
choose one of the destinations recent-
ly preset, stored by the system in a spe-
cial list.
❒Navigation settings– you can set
your preferences for the route type,
e.g. motorways, toll-roads or ferries.
❒Route simulation - Blue&Me™
Navallows you to simulate the type of
route to your set destination in ad-
vance.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 6
Page 12 of 106
11
HANDS-FREE KIT
QUICK REFERENCE
GUIDE
To quickly get started with using the
Blue&Me™ Navhands-free kit with
voice recognition and Bluetooth
®wire-
less technology:
❒Prepare your mobile phone phonebook
❒Turn the ignition key to MAR
❒Try out the voice commands
❒Pair your mobile phone
❒Make a phone call.
Instructions for each of the above func-
tions are given in the following paragraphs.PREPARE YOUR MOBILE
PHONE PHONEBOOK
Before creating a pairing relationship
between your mobile phone and
Blue&Me™ Nav,
you should make sure
that you have contact entries in your mo-
bile phone phonebook so that you can use
them with the hands-free phone.
If your phonebook is empty, quickly
create several new entries for frequently
dialled phone numbers. For further details,
consult your mobile phone owner’s man-
ual.
To enter properly contacts in your mo-
bile phone phonebook, refer to section
SETTING FUNCTIONS - PAIRING
YOUR MOBILE PHONE.IMPORTANT NOTES
❒The phonebook copied to Blue&Me™
Navcan only be used when the cor-
responding mobile phone is paired.
❒Entries stored in SIM card or mobile
phone memory can be transferred to
Blue&Me™ Navwith different pro-
cedures, according to your mobile
phone model.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 11
Page 15 of 106
1414
MESSAGE READER
QUICK REFERENCE
GUIDE
If your mobile phone with Bluetooth®
wireless technology supports the message
reader function, at the arrival of a new
SMS text, Blue&Me™ Navplays a tone
and it will ask if you would like to read it.
❒pronounce “Yes” or press ß/MAIN
or SRC/OKto read the last message
received
❒pronounce “No” or press &/ESC, the
system will store the message so you
can read it later
For further details on the message read-
er SMS, refer to section “MESSAGE
READER FUNCTIONS”.
If you encounter difficulties with any of
the message reader settings, consult sec-
tion “MESSAGE READER – TROU-
BLESHOOTING”
MEDIA PLAYER QUICK
REFERENCE GUIDE
To start playing the digital audio files
stored on your USB device, proceed as
follows:
❒Copy tracks to your USB device
(Blue&Me™ Navrecognizes .wma,
.mp3and .wavformats for audio files
and .wpland .m3uformats for playlists).
❒USB devices without USB wire: just
connect the USB device (directly or by
an extension lead) to the USB port on
the car (see fig. 1).
❒USB devices with USB wire: use the
wire to connect the USB device to the
USB port on the car (see fig. 1).
❒Turn the ignition key to MAR.
Blue&Me™ Navwill start automati-
cally to play your digital tracks select-
ing them from the library built at the
moment the USB device is connected.
❒After Blue&Me™ Navhas built the li-
brary containing your digital audio files,
you can select and play tracks, albums,
artists and playlists by interacting manu-
ally or verbally with Blue&Me™ Nav.
Building the library may require a few
minutes if your USB device contains sev-
eral files.
❒You can also decide whether to play au-
dio files automatically when connecting
the USB device or to play them upon
your command.
For further details on media player, refer
to section MEDIA PLAYER FUNCTIONS.
If you encounter difficulties with any of
the voice recognition operations, consult
section MEDIA PLAYER - TROU-
BLESHOOTING.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 14
Page 16 of 106
1515
NAVIGATION SYSTEM
QUICK REFERENCE
GUIDE
Proceed as follows to begin using the
Blue&Me™ Navnavigation function:
❒Connect the USB device provided with
the Blue&Me™ Navnavigation kit
with the map software to the USB pre-
sent on the car (see fig. 1).
❒Ensure the ignition key is in MARpo-
sition.
❒Press the control on the steering wheel
‘and say “Navigation”;
Blue&Me™ Navwill show the fol-
lowing warning message on the display
THE DRIVER MUST RESPECT
THE ROAD RULES. Now say
“New destination” and then “Ad-
dress”. Blue&Me™ Navwill ask you
the required country and you should
say the country where your destination
is located.
The system will ask you to enter the name
of the destination city, starting with man-
ual interaction and then completing using
voice commands.
Use the
Nor Okeys to scroll through
the characters required to make up the
name of the town/city and confirm each
character selected by pressing the
SRC/OKor
ß/MAINkeys.As soon as you have entered enough char-
acters, Blue&Me™ Navwill ask you to
say the required town/city. You can also
continue entering the name of the
town/city using the steering wheel con-
trols.
❒Continue entering the destination
road/street using the same method as
when entering the town/city. The
town/city centre may also be chosen as
a destination.
❒Specify the house number of the desti-
nation street by saying “Enter num-
ber” or say “Start” to begin navigation
immediately.
Note
For road safety reasons, address input op-
erations may only be carried out with the
vehicle parked.
To obtain information on all navigation sys-
tem functions and user instructions, re-
fer to the “NAVIGATION FUNCTIONS”
section
If you are experiencing difficulty using
the navigation system, consult the “PROB-
LEM-SOLVING – NAVIGATION SYS-
TEM” section
HOW TO USE
Blue&Me™ Nav
CONTROLS STEERING WHEEL
Buttons on the steering wheel (see fig. 1)
are used to perform functions on the
hands-free kit, activating voice recognition,
using the media player functions or select-
ing a Blue&Me™ Navmenu option.
Certain buttons have multiple functions
which depend on the current state of the
system.
The function chosen in response to a key
press is in some cases controlled by the
duration of the key press (short or long).
DISPLAY AND BUTTONS ON THE
STEERING WHEEL.
Note
Instructions concerning manual controls
are identified in the text by symbol
?.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 15
Page 26 of 106
2525
Answering an incoming phone call
during an active phone conversation
To answer an incoming phone call while
another phone conversation is active,
press
ß/MAIN. The system will switch
to the incoming phone call and put the
current phone conversation on hold.
Note
Certain mobile phones support the abili-
ty to transmit your contacts’ ring tones to
the hands-free phone system and play cus-
tomized ring tones for incoming phone
calls. In this case the incoming phone calls
will have your mobile phone customized
ring tones.
MANAGING PHONE CALLS
Transferring a phone conversation
from your mobile phone to the
hands-free phone system
If you enter the car during a phone con-
versation from your mobile phone and you
want to continue the conversation using
the car hands-free phone system, you can
transfer the phone conversation to it.
Proceed as follows:
❒Get into he car and turn the ignition
key to MAR, to activate the hands-free
phone system.
❒The system will send a message to your
mobile phone offering hands-free
phone support.
❒To transfer the conversation to the
hands-free phone, enter the informa-
tion required by your mobile phone.
(This process is different for each mo-
bile phone).
❒The phone conversation is transferred
to the system.
Transferring a phone conversation
from the hands-free phone to your
mobile phone
To transfer a phone conversation from
the hands-free phone to your mobile
phone, press SRC/OK.
You can talk on your mobile phone and
still use buttons on the steering wheel.
Specifically, you can press
ß/MAINto
switch between two phone calls on your
mobile phone, or press
ß/MAINfor
longer than 1 second to end the phone
conversation.
Putting a phone call on hold
To put a phone call on hold and disable
the microphone so that you can talk with-
out being listened to by the caller, press
&/ESC. CONFERENCE CALL
FUNCTION
(only with Bluetooth
®phones
supporting this function)
With the Conference Call function you
can call another contact while you are en-
gaged in a phone conversation yet. In this
way you can speak with both contacts at
the same time.
To start a Conference call while you are
still engaged in a phone conversation, call
the second required contact as described
in section MAKING A PHONE CALL.
When Conference Call option is active the
display will show “CONFERENCE”.
To end both calls, press button
ß/MAIN
for long.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 25
Page 30 of 106
2929
MEDIA PLAYER
FUNCTIONS
The MEDIA PLAYERmenu enables the
following:
❒to display tracks stored on your USB
device
❒to play audio files stored on your USB
device.
Note
Before starting to use your media player,
read section SUPPORTED USB MEMO-
RY DEVICES to make sure your USB
memory device is supported by
Blue&Me™ Nav.
HOW TO CONNECT THE USB
DEVICE TO Blue&Me™ Nav
To connect your USB device to
Blue&Me™ Nav, proceed as follows:
❒Copy tracks on your USB device
(Blue&Me™ Navrecognizes .wma,
.mp3and .wavformats for audio files
and .wpland .m3ufor playlists).
❒USB devices without USB wire: just
connect the USB device (directly or by
an extension lead) to the USB port on
the car (see fig. 1).
❒USB devices with USB wire: use the
wire to connect the USB device to the
USB port on the car (see fig. 1).
❒Turn the ignition key to MAR.
Blue&Me™ Navwill start automati-
cally to play your digital tracks select-
ing them from the library built at the
moment the USB device is connected.
❒If AUTOPLAYis set to“ON”,
Blue&Me™ Navwill start playback
automatically.
SETTINGS FUNCTION - MEDIA
PLAYER.
When building the media library is over, it
will be possible to use Blue&Me™ Nav
to to select and play tracks.HOW TO MANAGE
THE MEDIA LIBRARY
With the media player you can select the
audio files stored on your USB device, us-
ing voice commands or steering wheel
buttons.
You can scroll audio files by folder, artist,
genre, album or playlist and then select the
required category using voice commands.
After selecting the required category, se-
lect the required file using manual con-
trols.
Enter track data (e.g.: title, artist, album,
genre) for surfing your media library
friendly.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 29
Page 38 of 106
37
START NAVIGATION
Proceed as follows to begin using the
Blue&Me™ Navnavigation function:
❒Connect your USB device with pre-
loaded maps to the USB port on the ve-
hicle.
❒Turn the ignition key to MAR.
Note:
For reasons of road safety, some func-
tions, such as input of a new destination,
are allowed on with the vehicle at a stand-
still.
To activate the NAVIGATIONmenu in
manual mode, proceed as follows:
?
❒Press the NAVkey near the front
courtesy light (see fig. 1).
❒Or, with the Main Menu on, press
ß/MAIN, select the Navigation option
and press SRC/OKor
ß/MAIN.
Blue&Me™ Navwill show the following
warning message on the display THE
DRIVER MUST RESPECT THE
ROAD RULES. Press SRC/OKto con-
firm.Now you can access the submenus dedi-
cated to the Blue&Me™ Navnavigation
functions:
❒NEW DESTINATION
❒RESUME NAVIGATION
❒ARRIVAL INFORMATION
❒STOP NAVIGATION
❒RECENT DESTINATIONS
❒NAVIGATION SETTINGS
❒VEHICLE POSITION
❒ROUTE SIMULATION
Scroll to the required function using the
Nor Okeys and press SRC/OKor
ß/MAINto confirm.
}
Or with voice interaction:
Press
‘and say “Navigation”.
Blue&Me™ Navwill show the fol-
lowing warning message on the dis-
play THE DRIVER MUST RE-
SPECT THE ROAD RULES. Press SRC/OKto confirm (no spe-
cific voice command is available in
this event).Blue&Me™ Nav
will display a list of the available sub-
menus.
Speak one of the following com-
mands to gain access to the required
function:
❒New destination
❒Resume navigation
❒Arrival information
❒Stop navigation
❒Recent destinations
❒Navigation settings
❒Vehicle position
❒Route simulation
Note:
Some submenus may not be available since
they are activated only once navigation to-
wards a destination has started.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 37
Page 44 of 106
43
Note
If the point of interest selected using the
previous options has a telephone number
and your Bluetooth
®mobile phone is
connected to Blue&Me™ Nav, the sys-
tem will ask you if you wish to start navi-
gating toward the chosen point of interest
or make a phone call. Say “Start” to start
navigating or “Call” to make the phone
call.
After making the selection, Blue&Me™
Navwill display the name, distance and
address of the point of interest and ask for
confirmation in order to begin navigating.
Resume navigation
Blue&Me™ Navallows you to resume
navigation toward a set destination if nav-
igation has been suspended using the
STOP NAVIGATIONcommand.
?
To resume navigation, using manu-
al interaction:
Activate the main Menu, select the
NAVIGATIONoption and then
press SRC/OKor
ß/MAIN.Select the RESUME NAVIGA-
TIONoption by pressing SRC/OK
or
ß/MAIN.
Blue&Me™ Navwill ask you to
confirm the operation, press
SRC/OKor
ß/MAINto confirm
or
&/ESC” to cancel the above op-
eration.
}With voice interaction:
press
‘and say “Navigation” and
then, once you have heard the sys-
tem message, say “Resume navi-
gation”. The system will ask you to
say “Yes” to resume navigation or
“No” to cancel the above opera-
tion.
Note
If you turn your car’s ignition key to
STOPduring a navigation session,
Blue&Me™ Navwill automatically sus-
pend navigation.
When you turn your car’s ignition key to
MAR, the system will ask you if you wish
to resume navigation and show the preset
destination address on the reconfigurable
multifunction display.
?
With manual interaction press
SRC/OKor
ß/MAINto resume
navigation or
&/ESCin order not to
activate.
}With voice interaction, say “Yes”
to resume navigation or “No” in or-
der not to activate
Arrival information
Blue&Me™ Navis able to provide you
with an estimated time of arrival at your
destination and distance to the destination.
?
With manual interaction:
Activate the main Menu, select the
NAVIGATIONoption and then
press SRC/OKor
ß/MAIN.
Select the ARRIVAL INFORMA-
TIONoption by pressing SRC/OK
or
ß/MAIN.
Blue&Me™ Navwill display an es-
timated time of arrival and estimat-
ed distance remaining to the desti-
nation.
Note
When the car is moving, the arrival infor-
mation may be displayed immediate-
lyby pressing the NAVkey on the key-
pad near the courtesy light (see fig. 1).
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 43
Page 49 of 106
4848
SETTINGS FUNCTIONS
The SETTINGSmenu enables you to
perform the following functions:
❒Pairing a mobile phone
❒Managing user data
❒Managing Blue&Me™ Navupdate
❒Media player settings
❒Advanced Options.
To perform functions and adjustments in
the SETTINGSmenu, you may use but-
tons on the steering wheel or voice com-
mands at car standstill. When the car is
moving, you can use voice commands on-
ly. Instructions are provided for both
methods.
If you encounter difficulties with any of
the Blue&Me™ Navsettings, consult
section TROUBLESHOOTING.PAIRING A MOBILE PHONE
Before you can use your mobile phone
with the hands-free phone function on
your car, you must create a pairing rela-
tionship between the mobile phone and
the hands-free phone system.
During the pairing procedure, the hands-
free phone system attempts to detect a
phone equipped with Bluetooth
®wire-
less technology within range, and then es-
tablishes the connection using a Personal
Identification Number (PIN). After a pair-
ing relationship is established, you can use
the hands-free phone system to make and
receive phone calls, and do other opera-
tions via your wirelessly-connected mo-
bile phone.
IMPORTANT The mobile phone pairing
PIN number is a special PIN generated
randomly at each new pairing and used
just for this operation. It is not your SIM
PIN and therefore it is not required to
store or to keep it in mind; loosing it will
not impair the hands-free phone system
operation.
The pairing procedure will only need to
be performed once for your mobile
phone. After this procedure Blue&Me™
Navwill automatically connect to your
phone each time you get into the car and
turn the ignition key to MAR. For road safety reasons, it is only possi-
ble to alter the navigation settings with the
car at a standstill.
?
To simulate the active route, by
means ofmanual interaction:
Activate the main Menu, select the
NAVIGATIONoption and then press
SRC/OKor
ß/MAIN.
Select the ROUTE SIMULATION
option and press SRC/OKor
ß/MAIN
to start the simulation.
To stop the simulation, simply press
the NAVkey on the keypad near the
courtesy light.
}Or with voice interaction:
Press
‘and say “Navigation”.
Once you have heard the system
message, say “route simulation”.
Blue&Me™ Navwill start the sim-
ulation.
To stop the simulation, press
‘and say “Navigation”
For road safety reasons, it is
only possible to enter a new
destination with the car at a stand-
still.
WARNING
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 48
Page 56 of 106
5555
In certain cases, Blue&Me™ Nav
could display the following message:
“Update temporarily suspend-
ed. System update will continue
the next time you start the ve-
hicle.”. In other cases, during the up-
dating procedure, the system may
prompt to turn the ignition key to
“STOP” and then to “MAR”.
When updating is over and available,
Blue&Me™ Navwill display the
message UPDATE COMPLETE
and say: “Update completed”.
}
Or, using voice interaction:
Check for proper pairing between
your mobile phone and
Blue&Me™ Navand proper con-
figuration for data transmission.
Press
‘and pronounce “Set-
tings”, “Update”.
Blue&Me™ Navwill show the
message UPDATE, will say “Up-
date” and then it starts the updat-
ing procedure.If no update is available, Blue&Me™
Navwill display NO UPDATE
AVAILABLEand say “No update
available.”. Otherwise Blue&Me™
Navwill complete the updating pro-
cedure.
In certain cases, Blue&Me™ Nav
could say “Update temporarily
suspended. System update will
continue the next time you start
the vehicle”. In other cases, during
the updating procedure, the system
may prompt to turn the ignition key
to “STOP” and then to “MAR”.
When updating is over and available,
Blue&Me™ Navwill display the
message UPDATE COMPLETE
and say “Update completed”.Pausing the update
?
To pause updating using manual in-
teraction, proceed as follows:
During updating, select SET-
TINGS, PAUSE UPDATE. Then
select it with button SRC/OKor
ß/MAIN. Blue&Me™ Navwill
display the message UPDATE
PAUSEDand say “Update
paused”.
Or,
❒Turn the ignition key to STOP.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 55