instrument panel FIAT GRANDE PUNTO 2009 199 / 1.G Dualogic Transmission Manual

4
AUTOMATIC MODE
IMPORTANT To use the system proper-
ly, you are recommended to press ped-
als with the right foot only.
❒Press the brake pedal.
❒Start the engine.
❒Move the gear lever to A/M
fig. 3to engage the automatic mode or
to R-fig. 2to engage reverse.
❒Release the brake pedal and press the
accelerator pedal.
OPERATION
The gearbox can work in two operating
modes:
❒the first mode is manual (MANUAL):
the driver directly requests gearshift-
ing;
❒the second mode is automatic (AU-
TO): the system directly decides when
shifting gears. With this operating log-
ic it is possible to activate the ECO
(Economy) function to contain con-
sumption by pressing button E-fig. 4
set on the instrument panel. To shift
gears and to select the operating mode
(MANUALor AUTO) use the gear
lever with whatever speed. fig. 3F0M0272mfig. 4F0M0273m
GEAR LEVER
The gear lever A-fig. 1is located on the
central console and it is of the floating
“multi-stable position” type, i.e.: it features
three stable positions and three unstable
ones.
The three stable positions correspond to
neutral N-fig. 2, reverse R-fig. 2and cen-
tral position set between the unstable po-
sitions UP (+) and DOWN (–)fig. 1.
Unstable positions (i.e.: positions aban-
doned as soon as the gear lever is released)
are the upshifting position UP (+), the
downshifting position DOWN (–) and the
automatic mode position (A/M) fig. 3.
603.97.236 PuntoACTUAL Dual GB 31-07-2009 11:03 Pagina 4

6
Do not rest your hand on the
gear lever when your are not
shifting gears or if you are in
Auto/Manual mode.Automatic operation
(AUTO - ECO)
The ECOfunction can be activated only
with automatic mode active.
To activate the ECOfunction press but-
ton E-fig. 4located on the instrument
panel. After activating this function, the re-
configurable multifunction display shows
the gear engaged and words AUTOand
E(see next paragraph).
With ECOfunction active the system will
select the most suitable gear (according to
car speed, engine rpm and how the accel-
erator pedal is pressed) to save as much
fuel as possible.
If necessary (e.g.: overtaking), after press-
ing the accelerator pedal fully down, the
system will change gears in order to pro-
vide suitable torque and power for accel-
eration (this will take place in automatic
mode regardless of ECOfunction con-
dition, ON or OFF).
With AUTOmode active, the system de-
cides to change gear depending on car
speed, engine rpm and how the accelera-
tor pedal is pressed. It is however possi-
ble to change gears with the control lever
without deactivating the automatic mode:
this function called “gear advice” suspends
the automatic mode for the time required
to change gear.ENGAGED GEAR DISPLAYING
One second after turning the ignition key
to MAR, the gear engaged and the last op-
erating mode adopted (AUTOor
MANUAL) will be displayed on the re-
configurable multifunction display:
N= neutral;
1= first gear;
2= second gear;
3= third gear;
4= fourth gear;
5= fifth gear;
6= sixth gear (Multijet version);
R= reverse.
603.97.236 PuntoACTUAL Dual GB 31-07-2009 11:03 Pagina 6