length FIAT PANDA 2007 169 / 2.G Radio CD Tape Manual
[x] Cancel search | Manufacturer: FIAT, Model Year: 2007, Model line: PANDA, Model: FIAT PANDA 2007 169 / 2.GPages: 122, PDF Size: 0.8 MB
Page 7 of 122
6
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
❒Carefully clean all Compact Discs of fingerprints and
dust using a soft cloth. Support Compact Discs from
the outer circumference and clean from the centre
outwards;
❒Never use chemical products for cleaning (e.g.:
spray cans, antistatic or thinners) as they might
damage the surface of Compact Discs;
❒After use, put Compact Discs back in their
container, to avoid marks or scratches that may
cause skipping when playing;
❒Do not expose Compact Discs to direct sunlight,
high temperatures or damp for prolonged lengths of
time to prevent them from bending;
❒Do not stick labels on the CD surface, nor write on
the recorded surface by using pencils or pens.
To remove a Compact Disc from its container, press
the centre and raise the disc carefully, holding it by the
outer circumference.
Always hold Compact Discs by the outer
circumference. Never touch the surface.
To remove fingerprints and dust, use a soft cloth
starting from the centre of the Compact Disc
outwards.Do not use highly scratched, cracked, or distorted
discs, etc. The use of these discs will involve
malfunctioning or damage to the player.
IMPORTANT Do not use the protective sheets for
CD in commerce or discs with stabilisers, etc. as they
might get stuck in the internal mechanism and damage
the disc.
IMPORTANT Should copy-protected CDs be used,
then, few seconds may be required for playing them.
New discs may be rough around the edges. When
these discs are used, the player might not work or the
sound might skip. To remove the roughness from the
edge of the disc use a ball-point pen, etc.
001-050 ING 21-06-2007 15:48 Pagina 6
Page 86 of 122
85
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
SENSITIVITY function
(tuner sensitivity adjustment)
With this function it is possible to change the
sensitivity of automatic station searching. When low
sensitivity “SENSITIVITY LOCAL” is set only stations
with excellent reception are sought; when high
sensitivity “SENSITIVITY DISTANCE” is set all stations
are sought. Therefore, if the car is in an area with a
considerable number of stations and you want to
choose only those with a strong signal, set to low
sensitivity “SENSITIVITY LOCAL”.
To set the sensitivity, use button 5 (
÷) or (˜).
The display will show the current status of the
function:
❒“SENSITIVITY: LOCAL”: low sensitivity;
❒“SENSITIVITY: DISTANCE”: high sensitivity.SVC SETTING function
(volume changing with speed)
The SVC function makes it possible to automatically
adapt the volume level to the speed of the car,
increasing it as the speed increases to maintain the
ratio with the noise level in the passenger
compartment.
To turn the function on/off use button 5 (
÷) or
(
˜). The display will show the current status of the
function:
❒“SVC SETTING: ON”: function on;
❒“SVC SETTING: OFF”: function off.
CD NAMING function
(allocating a name to a CD)
Use the CD NAMING function to give a name (max.
name length = 8 characters) to max. 30 CDs.
This function can be selected only if in Compact Disc
or CD Changer mode. To turn this function on, use
button 5 (
÷) or (˜): the display shows “CD
NAMING FUNCTION”. If the CD already has a name,
this will be shown on the display, if not, eight dashes
will be shown. If storage is no longer available for a
new name, the display will show the first name stored.
051-098 ING 21-06-2007 15:49 Pagina 85
Page 116 of 122
115
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
SVC SETTING function
(volume changing with speed)
The SVC function makes it possible to automatically
adapt the volume level to the speed of the car,
increasing it as the speed increases to maintain the
ratio with the noise level in the passenger compart-
ment.
To turn the function on/off use button 5 (
÷) or
(
˜). The display will show the current status of the
function:
❒“SVC SETTING: ON”: function on;
❒“SVC SETTING: OFF”: function off.
CD NAMING function
(allocating a name to a CD)
Use the CD NAME function to give a name (max.
name length = 8 characters) to max. 30 CDs.
This function can be selected only if in Compact Disc
or CD Changer mode.
To turn this function on, use button 5 (
÷) or
(
˜): the display shows “CD NAMING FUNC-
TION”. If the CD already has a name, this will be
shown on the display, if not, eight dashes will be
shown. If storage is no longer available for a new
name, the display will show the first name stored.To change the name or give a name to the new CD
press button 5 (
÷) or (˜). Press the buttons
again to choose the position of the character to be
changed. Press buttons 6 (
N) or (O) to choose or
change the character.
To store the name, press button 11 (MENU-PRESET
SCAN) again. The display will show “CD NAME”.
To clear a name, turn the function on and press
button 15 (2-CLR) for about 5 seconds. The system
beeps and the display shows “ONE NAME DELETED”
for about 2 seconds. At this point the procedure can
be started to give a new name.
To clear all the names, turn the function on and keep
button 15 (2-CLR) pressed for over 8 seconds. The
set gives two beeps and the display shows “ALL NAME
DELETED” for about 2 seconds. At this point it is
possible to start the name allocation procedure.
099-120 ING 21-06-2007 15:51 Pagina 115