wheel torque FORD FIESTA 2013 7.G Owners Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 2013, Model line: FIESTA, Model: FORD FIESTA 2013 7.GPages: 341, PDF Size: 4.13 MB
Page 6 of 341
Vehicle Care 219
Cleaning products.....................................219
Cleaning the exterior..................................219
Waxing.............................................221
Repairing minor paint damage............................221
Cleaning the engine...................................221
Cleaning the windows and wiper blades.....................222
Cleaning the interior...................................222
Cleaning the instrument panel and instrument cluster lens.......223
Cleaning leather seats..................................224
Cleaning the alloy wheels...............................224
Vehicle storage.......................................225
Wheels and Tires 228
Tirecare ...........................................228
Tire Pressure Monitoring System (TPMS)...................244
Changing a road wheel.................................248
Technical specifications.................................253
Wheel lug nut torque..................................253
Capacities and Specifications 254
Engine specifications..................................254
Engine drivebelt......................................254
Part numbers........................................258
Vehicle identification number............................259
Vehicle certification label...............................260
Transmission code designation............................260
Accessories 261
Accessories.........................................261
Ford Extended Service Plan 263
Scheduled Maintenance 266
Normal scheduled maintenance and log.....................271
6Table of Contents
2013 Fiesta(fie)
Owners Guide gf, 1st Printing
USA(fus)
Page 252 of 341
7. Position the jack in the indentions
on the sill next to the tire you are
changing. Turn the jack handle
clockwise until the tire is off the
ground.
8. Remove the lug nuts with the lug wrench.
9. Replace the flat tire with the spare tire, making sure the valve stem is
facing outward. Reinstall the lug nuts until the wheel is snug against the
hub. Do not fully tighten the lug nuts until the wheel has been lowered.
10. Lower the wheel by turning the jack handle counterclockwise.
11. Remove the jack and fully
tighten the lug nuts in the order
shown. Refer toWheel lug nut
torque specificationslater in this
chapter for the proper lug nut
torque specification.
12. Put the flat tire, jack and lug
wrench away. Make sure the jack is
fastened so it does not rattle when
you drive. Unblock the wheels.
341
2
252Wheels and Tires
2013 Fiesta(fie)
Owners Guide gf, 1st Printing
USA(fus)
Page 253 of 341
TECHNICAL SPECIFICATIONS
Wheel Lug Nut Torque Specifications
WARNING:When a wheel is installed, always remove any
corrosion, dirt or foreign materials present on the mounting
surfaces of the wheel or the surface of the wheel hub, brake drum or
brake disc that contacts the wheel. Ensure that any fasteners that
attach the rotor to the hub are secured so they do not interfere with
the mounting surfaces of the wheel. Installing wheels without correct
metal-to-metal contact at the wheel mounting surfaces can cause the
wheel nuts to loosen and the wheel to come off while the vehicle is in
motion, resulting in loss of control.
Retighten the lug nuts to the specified torque within 100 miles (160 km)
after any wheel disturbance (tire rotation, changing a flat tire, wheel
removal, etc.).
Bolt size Wheel lug nut torque*
ft-lb N•m
M12 x 1.5 100 135
* Torque specifications are for nut and bolt threads free of dirt and
rust. Use only Ford recommended replacement fasteners.
Note:Inspect the wheel pilot bore
and mounting surface prior to
installation. Remove any visible
corrosion or loose particles.
Wheels and Tires253
2013 Fiesta(fie)
Owners Guide gf, 1st Printing
USA(fus)