ECU HONDA ACCORD 2010 8.G Technology Reference Guide
[x] Cancel search | Manufacturer: HONDA, Model Year: 2010, Model line: ACCORD, Model: HONDA ACCORD 2010 8.GPages: 16, PDF Size: 11.7 MB
Page 3 of 16
On/Off Indicators
Condition Indicators:Action is needed.
PASSENGER AIRBAGOFF
SIDE AIRBAG OFF
VSA solid: off Blinks: activated
CRUISE CONTROL on
CRUISE MAIN on
ECOECO on
Immobilizer Flashes: improperly coded key; use correct key
Headlights on
Turn signals/hazards on
Fog lights onHigh beams onSecurity system on
Seat belt reminder: Fasten seat belt(s)
Low fuel: Refill
Low tire pressure: Add air
Maintenance minder: Make appointment
Parking brake on: Release
Door/Trunk open: Close door(s) / trunk
PASSENGER AIRBAG OFF (above Hazard Warning button)
10 Accord TRG 4D_1ab:ExtraPages.qxd 4/6/2009 9:32 AM Page a1
Page 7 of 16
Auto Door Locks/HomeLink®
HomeLink®(EX-L V6)
Press and hold the button on the remote and the HomeLink button at the same time. Then, while continuing to hold the HomeLink button, press and release the button on the remote every 2 seconds.Does the LED blink at a faster rate within 20 seconds?
Press and hold the HomeLink button again.
Training complete
YES NO
HomeLink indicator flashes for 2 seconds, then remains on.
HomeLink LED remains on.YES NO
YES NO
Position the remote transmitter you wish to link 1–3 inches from the HomeLink button you want to program.
1
Press and hold the desired HomeLink but ton and the button on the remote transmitter.Does the HomeLink indicator (LED) blink at a faster rate after about 10 seconds?
2
aThe remote has a rolling code. Press the “learn” button on the remote-controlled device (e.g., garage door opener).
Press the programmed HomeLink button again; the remote-controlled device should operate.
Within 30 seconds, press and hold the programmed HomeLink button for 2 seconds.
a
Press and hold the programmed HomeLink button for about a second.Does the device (garage door opener) work?
3
b
4
5
Training a Button
Indicator remains on for about 25 seconds (standard transmitter).
Indicator flashes rapidly for 2 seconds, then remains on for about 23 seconds (rolling code transmitter).
Press and hold the desired HomeLink button until the HomeLink indicator begins to flash slowly.
When the indicator begins to flash slowly, continue to hold the HomeLink button and follow steps 1– 4 under Training a Button.
1
2
Retraining a Button
Erasing CodesTo erase codes stored in all buttons, press and hold the two outer buttons until the HomeLink indicator begins to flash (about 10 to 20 seconds), then release the buttons.
If you have any problems programming HomeLink, see the owner's manual included with the device you are trying to program, call HomeLink at (800) 355-3515 or visit www.homelink.com.
If you sell the vehicle, make sure to erase all codes.
The HomeLink Universal Transceiver built into your vehicle can be programmed to operate up to three remote-controlled devices around your home, such as garage doors, lighting, or home security systems.
10 Accord TRG 4D_Base:Base 4/6/2009 9:48 AM Page 4
Page 15 of 16
About This Technology Reference Guide
This Technology Reference Guide has been prepared to help you
get quickly acquainted with your new Honda, and to provide
reference instructions on driving controls and convenience items.
However, this guide is not intended as a substitute for the
Owner’s Manual.For complete information on operating the
vehicle safely, please refer to the Owner’s Manual.
As with the Owner’s Manual, this guide covers all models of the
Honda Accord 4-Door. Therefore, you may find descriptions of
equipment and features that are not on your particular model.
Safety Reminder
Your vehicle is equipped with airbags. Airbags do not replace
your seat belts; they add to the protection offered by seat belts.
Airbags can help protect you in some types of collisions, but they
do not provide protection in all collisions.
Always make sure you and your passengers wear seat belts, and
that young children are properly secured in a child seat or
booster in the rear seat. Never place an infant seat in the front
passenger’s seat as the force of a deploying airbag can seriously
injure an infant.
31TA5Q20
00X31-TA5-Q2002010 Honda Accord 4-Door Technology Reference Guide©2009 American Honda Co., Inc. -All Rights Reserved
Printed in U.S.A.
Fuel Recommendation
Use only unleaded gasoline of
87 octane or higher.
Some gasoline in North America
contains MMT, a manganese-based
fuel additive. Prolonged and consistent
use of gasoline containing MMT can
deteriorate your vehicle’s performance,
fuel economy, and the emissions
control system. Always use MMT-free
gasoline if alternatives exist. Failures
caused by use of gasoline containing
MMT may not be covered under
warranty.
For further important information on
fuel and lubricants for your car and
information on gasoline that does
not contain MMT, contact your
dealer or visit Owner Link at
www.hondacars.com.
2010_TRG_US.qxd:QSG_US.qxd 4/13/09 5:03 PM Page 4