brake LINCOLN MKZ 2010 Quick Reference Guide

1 Headlamps Turns the headlamps off.
Turns on parking, instrument
panel, license plate and tail lamps.
Turns on headlamps.

Automatically turns the
exterior lamps on/off based
on available daylight.
Turns on fog lamps by pulling
the control towards you.
adaptive Headlamps (if equipped): These headlamps move in the
same direction as your steering
wheel to provide added visibility
around curves.

2 p
anel dimmer control
Press and hold the top or bottom of
the control until the desired lighting
level is reached. Press and hold the
top of the control to turn on the
interior courtesy lights. Press the
bottom of the control to turn off.

3 ambient ligHting (if equipped)
Press repeatedly to turn the
feature on, cycle through your color
options and turn the feature off.
When activated, the foot well areas,
cup holders and center console bin
illuminates with the chosen color.

4 interior trunk release

5 multi-function lever
Rotate the end of the control up/
down to increase/decrease the
speed of the wipers.
push the end of the stalk:
• quickly for a single swipe
without fluid.
• and hold briefly for three swipes
with washer fluid.
• and hold for a longer wash cycle.
rain sensing wipers (if equipped): These wipers automatically activate
when moisture is present on the
windshield and the control is set
to any setting except OFF. The
wiper speed will vary based on the
amount of moisture detected on
the windshield as well as the current
interval setting. Ensure that the
control is turned to OFF prior to
entering a car wash.
For better visibility, your vehicle
will also automatically turn on your
headlights if your windshield wipers
and auto lamps
are on. note:
For optimal wiper performance,
clean blades and glass regularly.
Refer to your Owner’s Guide for
more information.



6 tilt /telescope
steering wHeel

7 steering wHeel controls
t o set the speed:
1. Press ON.
2. Accelerate to the desired speed.
3. Press SET + or SET - and take your
foot off the accelerator.
• To set a higher speed, press
and hold SET + or, press SET
+ repeatedly until the desired
speed is reached.
• To set a lower speed, press
and hold SET – or, press SET
– repeatedly until the desired
speed is reached.
• To return to a previously set
speed, press RESUME.
• To turn off, depress the brake
pedal or press OFF.
VOL +/- : Press to increase/decrease
volume levels.
: Press to access the previous/
next radio station, CD
track or preset satellite
radio channel.
MEDIA – Press repeatedly to access
all possible media sources.
: Press to access voice
recognition, if equipped.
: Press to access SYNC® phone
features, if equipped.
For a complete list of all possible
options, please refer to your
Owner’s Guide.

8 message center
Displays important vehicle
information through a constant
monitoring of vehicle systems. The
system will notify you of potential
problems with a display of warnings
followed by a long indicator chime.
Use the INFO, SETUP and RESET
buttons to access various menus and
settings within the message center.
Refer to your Owner’s Guide for
more information.

9 navigation system
(if equipped)
The Mobile Media Navigation
System allows you to record CDs,
listen to your saved music, play
DVDs and access climate control
options in addition to navigating the
vehicle. Refer to your Navigation
supplement for more information.






10 Heated and cooled driver/
passenger seats
Push once to activate high heat/
cool (three indicator lights), press
twice to activate medium heat/cool
(two indicator lights), press again
to activate low heat/cool and press
again to deactivate.

11 Hazard flasHer

12 advancetrac® stability
enHancement system
Helps you maintain stability and
steerability of your vehicle during
a variety of road conditions. If your
vehicle becomes stuck, try turning
off the AdvanceTrac
® system (by
pressing the control) to allow
wheel spin and help increase
momentum to help dig the vehicle
out. Refer to your Owner’s guide
for more information.

13 p
assenger airbag off
Illuminates when the passenger airbag has been turned off due
to the system detecting light
to medium weight in the front
passenger seat. For complete
information, refer to the Front
Passenger Sensing System in the
Seating and Safety Restraints
chapter of your Owner’s guide. service engine soon ligHt
Illuminates briefly when the ignition is
turned on. If it remains on or is blinking
after the engine is started, the On
Board Diagnostics System (OBD-II)
has detected a malfunction. Drive in
a moderate fashion and contact your
authorized dealer as soon as possible.

abs (anti-lock brake system)
ligHt
Illuminates briefly when the ignition is
turned on. If the light remains on or
continues to flash, a malfunction has
been detected. Contact your authorized
dealer as soon as possible and have

the system serviced. Normal braking
(less ABS) is still functional unless the brake
warning light
is also illuminated.

advance trac
®/traction
controltm ligHt
Illuminates when AdvanceTrac®/
TractionControlTM is active. If the light
remains on, contact your authorized
dealer as soon as possible. air bag readiness ligHt
Illuminates briefly when the ignition is
turned on. If this light fails to illuminate,
remains on or continues to flash after
the engine is started, contact your
authorized dealer for service as soon as
possible. A chime will also sound if there
is a malfunction in the indicator light.

tHrottle control/
transmission ligHt
Illuminates when a powertrain or AWD
fault is detected. If the light remains on
or continues to come on, contact your
authorized dealer for service as soon
as possible.

low tire pressure warning
Illuminates when your tire pressure is
low. If the light remains on, the tire
pressure should be checked. If the light
does not turn on or begins to flash when
the ignition is first turned on or while
driving, contact your authorized dealer
as soon as possible.
instrument Cluster
vol/pusH – Push to turn the system
on/off. Turn to increase/decrease
the volume.
cd – Press to enter CD/MP3 mode. If
a disc is already present in the system,
CD play will begin where it last ended.
am/fm – Press repeatedly to cycle
through AM, FM1 or FM2
frequency bands.
sirius – Press repeatedly to cycle
through SAT1, SAT2 and SAT3 (satellite
radio modes, if equipped). Press MENU
when active and then OK to enter the
satellite radio menu and access more
options. Refer to your Owner’s Guide
for more information.
sound – Press repeatedly to access:
Bass, Treble, Balance, Fade, Speed
compensated volume and All seats
(Occupancy mode, if equipped) menu
options. Press I
t SEEK u I to
make adjustments. clock – To set the time, press CLOCK.
Use the memory preset numbers (0-9) to
enter the desired time.
tune/scan – Turn to go to the next/
previous satellite radio channel, or to go
up/down the radio band frequency in
individual increments.
direct – Press DIRECT and then, using
the memory presets (0-9), enter in the
desired radio station, track number,
MP3 folder number (if in MP3 mode),
or satellite radio channel.
SIRIUS
® satellite radio broadcasts
music, sports, news and entertainment
programming. For more information
and a complete list of SIRIUS
® satellite
radio channels, visit www.sirius.com in the
United States, www.sirius-canada.ca
in Canada, or call SIRIUS
® at
1–888–539–7474. Satellite radio
is only available with a valid SIRIUS
®
radio subscription.
for more information on this system,
please refer to your owner’s guide.
A uDiO System
in-DAsh CD6/mP3 s Atellite
COmPA tible sOunD system
24567811112931013
instrument Panel
Use extreme caution when using any device or feature
that may take your attention off the road. Your primary
responsibility is the safe operation of the vehicle. Only use
non-essential features and devices when it is safe to do so.
note: The system illustrated here is the navigation based audio system.
Please refer to your navigation supplement for complete information on this syst\
em.
150724_10a_MKZ_QRG_010509.indd 1-61/12/09 1:41:50 PM