height MERCEDES-BENZ C300 4MATIC 2008 W204 Owner's Manual

Contents
Controls in detail............................... 69
Locking and unlocking ......................... 70
SmartKey ....................................... 70
SmartKey with KEYLESS-GO*
(Canada only) ................................. 73
Checking batteries in the SmartKey
or SmartKey with KEYLESS-GO*
(Canada only) ................................. 78
Loss of the SmartKey or SmartKey
with KEYLESS-GO* (Canada only) .. 79
Opening doors from the inside ....... 79
Automatic central locking .............. 80
Locking and unlocking
from the inside ............................... 81
Starter switch positions ....................... 82
SmartKey ....................................... 82
SmartKey with KEYLESS-GO*
(Canada only) ................................. 83
Seats.................................................... 85
Seat adjustment ............................. 85
Lumbar support .............................. 91
Seat heating* ................................. 91Steering wheel ..................................... 93
Steering wheel adjustment,
manual ........................................... 93
Steering wheel adjustment,
electrical* (Canada only)................ 94
Easy-entry/exit feature*
(Canada only) ................................. 95
Mirrors ................................................. 97
Interior rear view mirror ................. 97
Exterior rear view mirrors............... 97
Power folding
exterior rear view mirrors* ............. 98
Interior rear view mirror,
antiglare position ........................... 99
Auto-dimming rear view mirrors* . 100
Activating exterior rear view mirror
parking position* (Canada only)... 101
Memory function* (Canada only) ....... 102
Storing positions into memory* ... 103
Recalling positions from memory* 103
Storing exterior rear
view mirror parking position*....... 104
Fastening the seat belts .................... 105
Proper use of seat belts ............... 106
Seat belt height adjustment ......... 107Lighting ............................................. 108
Exterior lamp switch .................... 108
Switching on high beams ............. 112
Headlamp cleaning system* ........ 112
Corner-illuminating front
fog lamps* (With Bi-Xenon*
headlamps only)........................... 112
Hazard warning flasher ................ 114
Interior lighting ............................ 114
Door entry lamps ......................... 116
Trunk lamp ................................... 116
Windshield wipers ............................. 117
Switching on/off
windshield wipers ........................ 118
Single wipe .................................. 118
Intermittent wiping ...................... 118
Wiping with
windshield washer fluid................ 119
Power windows ................................. 120
Opening and closing
power windows ............................ 120
Summer opening feature ............. 123
Convenience closing feature ........ 124

54 Safety and Security
Occupant safety
Installation of infant and child restraint
systems
This vehicle is equipped with tether an-
chorages for a top tether strap at each of
the rear seating positions.
Top tether straps enable an additional con-
nection to be made between child restraint
systems secured with LATCH-type anchors
and rear seats. This can further reduce the
risk of injury.
Warning!G
Infants and small children should never
share a seat belt with another occupant.
During an accident, they could be crushed
between the occupant and seat belt.
A child’s risk of serious or fatal injuries is
significantly increased if the child restraints
are not properly secured in the vehicle
and/or the child is not properly secured in
the child restraint.
Children too big for a toddler restraint must
ride in seats using regular seat belts. Posi-
tion shoulder belt across chest and shoul-
der, not face or neck. A booster seat may be
necessary to achieve proper seat belt posi-
tioning for children over 41 lbs until they
reach a height where a lap/shoulder belt fits
properly without a booster.
When the child restraint is not in use,
remove it from the vehicle or secure it with
the seat belt to prevent the child restraint
from becoming a projectile in the event of
an accident.
Do not leave children unattended in the
vehicle, even if the children are secured in a
child restraint system. Unsupervised chil-
dren in a child restraint system may use
vehicle equipment and may cause an acci-
dent and/or serious personal injury.
Warning!G
Always lock backrest in its upright position
when rear seat bench is occupied by pas-
sengers, before installing top tether straps,
or the extended cargo compartment is not in
use. Check for secure locking by pushing
and pulling on the backrest. If the seat back-
rest is not properly locked, the seat back-
rest could fold. The child seat would no
longer be properly supported or positioned
to provide its intended benefit. That could
cause serious or even fatal injuries.

56 Safety and Security
Occupant safety
1Indicator
2Cover
3Anchors
Remove covers1 from anchors3 by
pulling it in direction of arrow.
Store covers1, for example in the
storage compartment of the rear cen-
ter armrest.
Split rear bench seat*
Install child seat according to the
manufacturer’s instructions.
A rigid connection is established be-
tween the child seat and the body of
the vehicle.
Warning!G
Children too big for a toddler restraint must
ride in seats using regular seat belts.
Position shoulder belt across chest and
shoulder, not face or neck.
A booster seat may be necessary to achieve
proper seat belt positioning for children over
41 lbs until they reach a height where a
lap/shoulder belt fits properly without a
booster.
Install child seat according to manufactur-
er’s instructions.
The child seat must be firmly attached to the
right and left side anchors.
An incorrectly mounted child seat may come
loose during an accident which could result
in serious injury or death to the child.
Damaged or impact damaged child seats or
child seat anchor fittings must be replaced.
Do not leave children unattended in the
vehicle, even if the children are secured in a
child restraint system.
iNon-LATCH type child seats may also be
used and can be installed using the vehicle’s
seat belt system. Install child seat according to
the manufacturer’s instructions.
!Make sure the seat belt for the center seat
can operate freely with a child seat installed.

86 Controls in detail
Seats
For additional information about children
in the vehicle, see “Children in the vehicle”
(
page 51).Power seat adjustment
The seat adjustment switch is located on
the entry side of each front seat base.
The seat adjustment switch for Canada ve-
hicles with memory function* are located
on the front doors.
1Seat cushion tilt
2Seat height
3Seat fore and aft
4Seat backrest tilt
Vehicles without memory function*:
Adjust the head restraint height manu-
ally (
page 87).
Driver’s door (Canada only)
1Seat cushion tilt
2Seat height
3Seat fore and aft
4Seat backrest tilt
5Head restraint height (
page 87)
Warning!G
According to accident statistics, children
are safer when properly restrained in the
rear seating positions than in the front seat-
ing position. Thus, we strongly recommend
that children be placed in the rear seats
whenever possible. Regardless of seating
position, children 12 years old and under
must be seated and properly secured in an
appropriately sized infant restraint, toddler
restraint, or booster seat recommended for
the size and weight of the child.
A child’s risk of serious or fatal injuries is
significantly increased if the child restraints
are not properly secured in the vehicle and
the child is not properly secured in the child
restraint.
iAfter unlocking the vehicle or turning off the
engine, the seat adjustment can be operated for
up to approximately 3 minutes with the
SmartKey or KEYLESS-GO* (Canada only) in
starter switch position0 or removed from the
starter switch.
Vehicles with memory function* (Canada only):
The memory function* is operational at any time.
Seat and steering wheel adjustment is always
possible.

87 Controls in detail
Seats
If it is not possible to adjust the seat with
the seat adjustment switch:
Insert the SmartKey or the
KEYLESS-GO start/stop button*
(Canada only) into the starter switch.
or
With SmartKey or KEYLESS-GO*
(Canada only) in starter switch
position0. Turn the SmartKey in
starter switch to position1 or press
the KEYLESS-GO start/stop button*
(Canada only) once.
or
Open the driver’s or front passenger
door.
Seat cushion tilt: Press the switch up
or down in the direction of
arrow1until your upper legs are
lightly supported.
Seat height: Press the switch up or
down in the direction of arrow2.
Seat fore and aft: Press the switch for-
ward or backward in the direction of
arrow3.
Seat backrest tilt: Press the switch
forward or backward in the direction of
arrow4.Adjusting front seat head restraints
You cannot remove the active head re-
straint on the driver’s and front passen-
ger’s seat.
For removal contact an authorized
Mercedes-Benz Center.
For information on active head restraints,
see “Active head restraints” (
page 50).
iCanada only:
The memory function* (
page 102) lets you
store the settings for the seat positions together
with the settings for the steering wheel and the
exterior rear view mirrors.
!When moving the seat, make sure there are
no items in the footwell or behind the seats. Oth-
erwise you could damage the seats.
Warning!G
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint so that it is as
close to the head as possible and the center
of the head restraint supports the back of
the head at eye level. This will reduce the po-
tential for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.

88 Controls in detail
Seats
Head restraint height
Head restraint height, manual adjusting
1Release button
Raising: Manually adjust the height of
the head restraint by pulling it upward.
Lowering: To lower the head restraint,
push release button1 and push down
on the head restraint.
Head restraint height, electrical*
(Canada only)
1Head restraint height
Raising/lowering: Press the switch
up or down in the direction of arrow1
until the desired position is reached.Head restraint fore and aft adjustment
Head restraint adjusting
Manually adjust the head restraint.
Push or pull on the lower edge of the
head restraint cushion to the desired
position.

89 Controls in detail
Seats
Adjusting rear head restraintsRear head restraint height
Head restraint height
1Release button
Raising: Manually adjust the height of
the head restraint by pulling it upward.
Lowering: To lower the head restraint,
push release button1 and push down
on the head restraint.Rear head restraint fore and aft
adjustment
Head restraint adjusting
You can adjust the angle of the two outer
head restraints.
Manually adjust the head restraint.
Push or pull on the lower edge of the
head restraint cushion to the desired
position.
Warning!G
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint so that it is as
close to the head as possible and the center
of the head restraint supports the back of
the head at eye level. This will reduce the
potential for injury to the head and neck in
the event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are
intended to help reduce injuries during an
accident.

102 Controls in detail
Memory function* (Canada only)
Prior to operating the vehicle, the driver
should check and adjust the seat height,
seat position fore and aft, and seat back-
rest angle if necessary, to ensure adequate
control, reach, and comfort. The head re-
straint should also be adjusted for proper
height. See also the section on air bags
(
page 36) for proper seat positioning.
In addition, adjust the steering wheel to
ensure adequate control, reach, operation
and comfort. Both the inside and outside
rear view mirrors should be adjusted for
adequate rear vision.Fasten seat belts. Infants and small chil-
dren should be seated in a properly se-
cured restraint system that complies with
U.S. Federal Motor Vehicle Safety Stan-
dards 213 and 225 and Canadian Motor
Vehicle Safety Standards 213 and 210.2.
With the memory function you can store up
to 3 different settings.Each stored position on the driver’s side
includes the following settings:

Seat position

Steering wheel position

Exterior rear view mirrors position
On passenger side, the seat position is
stored on each memory position.
Warning!G
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.

106 Controls in detail
Fastening the seat belts
1Seat belt outlet
2Latch plate
3Release button
4Buckle
Pull the seat belt smoothly from the
seat belt outlet1.
Place the shoulder portion of the seat
belt across the top of your shoulder
and the lap portion across your hips.
Push latch plate2 into buckle4 until
it clicks.
If necessary, adjust the seat belt to the
correct height (
page 107).
If necessary, tighten the lap portion to
a snug fit by pulling shoulder portion
up.
To release the seat belt, press release
button3 and guide latch plate2
back to seat belt outlet1.
Proper use of seat belts

Do not twist the seat belt when fasten-
ing.

Adjust seat belt so that the shoulder
portion is located as close as possible
to the middle of the shoulder (it should
not touch the neck). Never pass the
shoulder portion of the seat belt under
your arm.

Position the lap belt as low as possible
on your hips (over hip joint) and not
across the abdomen.

Place the seat backrest in a nearly up-
right position.

Never use a seat belt for more than one
person at a time.

Do not fasten a seat belt around a per-
son and another object at the same
time. When using a seat belt to secure
infant restraints or toddler restraints or
children in booster seats, always follow
the child seat manufacturer’s instruc-
tions.
Warning!G
Read and observe the additional warning no-
tices printed in the “Safety and Security”
section.

107 Controls in detail
Fastening the seat belts

Check your seat belt during travel to
make sure it is properly positioned.

Make sure the seat belt is always fitted
snugly. Take special care of this when
wearing loose clothing.For more information, see “Seat belts”
(
page 46).
Seat belt height adjustment
You can adjust the height of the seat belt
for the driver’s and front passenger seat.
1Release button
Raising: Slide the seat belt height ad-
juster upward.
The seat belt height adjuster engages
in different positions.
Lowering: Press and hold release
button1.
Slide the seat belt height adjuster
downward.
Release button1 and make sure the
seat belt height adjuster engages into
place.
Warning!G
Do not pass seat belts over sharp edges.
They could tear.
Do not allow the seat belt to get caught in
the door or in the seat adjustment mecha-
nism. This could damage the seat belt.
Never attempt to make modifications to
seat belts. This could impair the effective-
ness of the seat belts.
Do not bleach or dye seat belts as this may
severely weaken them. In a crash, they may
not be able to provide adequate protection.
Damaged seat belts or seat belts that were
highly stressed in an accident must be re-
placed. Contact an authorized
Mercedes-Benz Center.