ground clearance MERCEDES-BENZ S-CLASS SALOON LONG 2020 Owners Manual

#
Ensu rethere is suf ficient ground clear‐
ance between the underbody and the
guide rails of the car wash. #
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is suf ficient. To
avo id damage to yourvehicle when using a
car wash, ensure thefo llowing beforehand:
R Active Dis tance Assi stDISTRONIC is deacti‐
va ted.
R the HOLD function is switched off.
R the 360° Camera or there ve rsing camera is
switched off.
R theve hicle is loc ked and the door handles
re tracted.
R the side windo wsand sliding sun roof are
comple tely closed.
R the blo werfo rth eve ntilation/heating is
switched off.
R the windscreen wiper switch is in position
g. R
theke y is at a minimum distance of 6 m
aw ay from theve hicle. Otherwise the boot lid
or a door could open unintentionall y.
R for car washes with a con veyo r sy stem:
- neutral iis engaged.
- theve hicle is loc ked from inside.
R do not make any hand mo vements in the
area of theov erhead control panel or deacti‐
va te ( / page 311) theSliding sunroof and
roller sunblind option inthe settings forthe
MBUX interior assis tant.
% If, af terth e car wash, youre mo vethewax
from the windscreen and wiper rubbers, this
will pr event smearing and reduce wiper
noise. Information on using a high-p
ressure cleaner &
WARNING Risk of an accident when
using high-pressure cleane rswith round-
spray nozzles
The wate r jet can cause extern ally invisible
damage. Components damaged in
this wa y may unex‐
pec tedly fail. #
Do not use a high-pressure cleaner with
round-spr aynozzles. #
Have damaged tyres or chassis parts
re placed immediatel y. To
avo id damage to yourvehicle, obser vethefo l‐
lowing when using a high-pressure cleaner:
R theke y is at a minimum dis tance of 3 m
aw ay from theve hicle. Otherwise the boot lid
or a door could open unintentionall y.
R maintain a dis tance of at least 30 cm tothe
ve hicle.
R vehicles with deco rative foil: parts of your
ve hicle are co vered with a decorative foil.
Maintain a dis tance of at least 70 cm
between thefo il-c ove red parts of theve hicle
and the nozzle of the high-pressure cleaner.
Mo vethe high-pressure cleaner nozzle
around whilst cleaning. The waterte mp era‐
ture of the high-pressure cleaner must not
exc eed 60°C. 354
Maintenance and care

#
Deactivate the automatic locking mecha‐
nism . #
Do not activate the HOLD function. #
Deactivate tow- aw ay protection
(/ page 105). #
Deactivate Active Brake Assi st
( / page 247). #
Shift the automatic transmission toposition
i. #
Release the electric parking brake. &
WARNING Risk of accident due tolimi‐
te d saf ety-re lated functions during the
to wing process
Saf ety-re lated functions are limited or no lon‐
ge rav ailable in thefo llowing situations:
R the ignition is switched off.
R the brake sy stem or po werst eering sys‐
te m is malfunctioning.
R the energy supply or the on-board electri‐
cal sy stem is malfunctioning. When
your vehicle is then towe daw ay, signif‐
icantly more ef fort may be requ ired tosteer
and brake than is no rmally requ ired. #
Use a tow bar. #
Make sure that thesteering wheel can
mo vefreely before towing theve hicle
aw ay. *
NO
TEDama gedue toexcessive tracti ve
po wer If
yo u pull away sharpl y,the tractive po wer
may be too high and theve hicles could be
damaged. #
Pull away slowly and smoo thly. Loading the
vehicle for transport #
Obser vethe no tes on towing away
( / page 375). #
Connect theto w bar totheto wing eye in
order toload theve hicle. %
Vehicles with trailer hitch: you can also
attach theto w bar tothe trailer hitch. #
Shift the automatic transmission toposition
i.
% The automatic transmission may be loc ked
in position jintheeve nt of dama getothe
electrics. Toshift toi , pr ovide the on-
board electrical sy stem with po wer
( / page 372). #
Raise theve hicle in order toachie vegreater
ground clearance (/ page 258). #
Load theve hicle onto the transpor ter. #
Shift the automatic transmission toposition
j. #
Use the electric parking brake tosecure the
ve hicle against rolling away. #
Only secure theve hicle bythe wheels. 376
Breakdown assis tance

Display messages
Possible causes/consequences and M
MSolutions #
Stop theve hicle immediately in accordance with the traf fic conditions. Do not continue driving. #
Uncouple the trailer and secure it against rolling away. #
Initiate a new swivel mo vement and do not re-couple the trailer until thewa rning/indicator lamp goes out. #
Initiate a new swivel mo vement (/ page 283). #
When the display message disappears, couple up the trailer and drive on.
If th e display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not loc ked. #
Do not couple up the trailer. Drive on without the trailer. No tethere duced ground clearance due tothe
unlo cked ball nec k. #
Consult a qualified specialist workshop.
*T he trailer hitch will not be operational when theve hicle is stationar y. #
Uncouple the coupled trailer and secure it against rolling away. #
Ifth e ball neck has been retracted: initiatea new swivel mo vement (/ page 283).
The ball neck will engage vertically in the loc ked position and then engage beneath the bumper. #
Ifth e ball neck has been extended: initiate a new swivel mo vement (/ page 283).
The ball neck will engage benea th the bumper.
If th e display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not loc ked. 504
Display messages and warning/indicator lamps

Display messages
Possible causes/consequences and M
MSolutions #
Do not couple up the trailer. Drive on without the trailer. No tethere duced ground clearance due tothe
unlo cked ball nec k. #
Consult a qualified specialist workshop.
Please teach in trailer cou-
pling again using the but-
ton in load compartment
Wait for it to extend/
retract *T
he swivel mo vement of the trailer hitch is impaired. #
Use the button on the boot lid totrig ger a ne w,compl ete swivel mo vement until the ball neck engages beneath
th e bumper.
Ù
Steering malfunction Drive
carefully Visit workshop *A
powe rst eering malfunction has occur red. Steering characteristics may be impaired as a result. #
Drive on carefully. #
Consult a qualified specialist workshop.
Ù Steering malfunction
Increased physical effort
See Owner's Manual *T
he po werst eering assis tance is malfunctioning. &
WARNING Risk of an accident due toaltered steering characteristics
If th e po wer assi stance of thesteering fails partially or comple tely, you will need touse more forc eto steer. #
If safe steering is possible, drive on carefully. #
Visit or consult a qualified specialist workshop immediatel y. Displ
aymessa ges and warning/indicator lamps 505