adding oil MERCEDES-BENZ SL CLASS 2011 Owners Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2011, Model line: SL CLASS, Model: MERCEDES-BENZ SL CLASS 2011Pages: 316, PDF Size: 6.55 MB
Page 10 of 316
Number .......................................... 295
Starting ............................................ 98
Turning off ..................................... 102
Engine (Technical data)
see Vehicle specification
Engine coolant
see Coolant
Engine oil
Adding ........................................... 183
Additives ........................................ 306
Checking level ............................... 181
Consumption ................................. 181
Messages in the multifunction
display ........................................... 247
Oil dipstick ..................................... 182
Recommended engine oils and oil
filter ............................................... 305
ESP ®
(Electronic Stability
Program) .............................................. 56
ETS .................................................. 57
Messages in the multifunction
display ........................................... 228
Warning lamp ........................ 259, 260
ETD (Emergency Tensioning
Device) ................................................. 49
Safety guidelines ............................. 40
ETS (Electronic Traction System) ....... 57
Express operation
Power windows ................................ 96
Exterior lamp switch ........................... 89
Exterior rear view mirrors .................. 86
Fold-in function ................................ 88
Parking position ............................... 87
Power-folding ................................... 88
Switching fold-in function on or
off .................................................. 127
Exterior view of vehicle ...................... 26
F
Fastening the seat belts ..................... 48
First aid kit ......................................... 224
Flat tire ............................................... 276
Lowering the vehicle ......................282
Mounting the spare wheel .............277
Preparing the vehicle .....................277
Spare wheel ........................... 276, 303
Floormats ........................................... 175
Fluids
ABC fluid ................................ 184, 304
Automatic transmission fluid .........304
Brake fluid ..................................... 304
Capacities ...................................... 303
Engine coolant ............................... 304
Engine oil ....................................... 304
Hydraulic fluid ................................ 305
Power steering fluid .......................304
Washer and headlamp cleaning
system ........................................... 305
Fog lamps ............................................. 91
Messages in the multifunction
display ................................... 250, 252
Fold-in function for exterior rear
view mirrors ........................................ 88
Front air bags see Air bags
Front lamps
see Headlamps
Fuel ..................................................... 178
Additives ........................................ 307
Capacity, fuel tank .........................305
Drive sensibly–safe fuel .................209
Fuel consumption statistics ...........128
Fuel filler flap and cap ...................179
Fuel tank reserve warning
lamp .................................. 31, 32, 262
Premium unleaded gasoline ...........306
Refueling ........................................ 178
Requirements ................................ 307
Fuel filler flap ..................................... 179
Fuels, coolants, lubricants etc. ........ 303
Fuel tank
Capacity ........................................ 305
Fuel filler flap and cap ...................179
Refueling ........................................ 178
Fuses .................................................. 291
G
Garage door opener .................... 35, 172
Gasoline see Fuel
GAWR (Gross Axle Weight Rating) ... 206
Gear range ......................................... 106
Indicator ........................................ 106
8Index230_AKB; 6; 22, en-USd2ureepe,Version: 2.11.8.12009-07-28T18:49:58+02:00 - Seite 8
Page 185 of 316
If you see the message:
Observe
Waiting Time
XIf the engine is at operating temperature,
wait 5 minutes before repeating check
procedure.
XIf the engine is not at operating
temperature yet, you must wait 30 minutes
before checking oil.
If you see the message:
Engine Oil Level
Not With
Engine Running
XTurn off the engine.XIf the engine is at operating temperature,
wait 5 minutes before checking oil.
XIf the engine is not at operating
temperature yet, you must wait 30 minutes
before checking oil.
If there is excess engine oil with the engine at
normal operating temperature, the following
message appears in the multifunction
display:
Engine Oil Level
Reduce Oil Level
XHave excess oil siphoned or drained off.
Contact an authorized Mercedes-Benz
Center.
! Excess oil must be siphoned or drained
off. It could cause damage to the engine
and emission control system not covered
by the Mercedes-Benz Limited Warranty.
For information on messages in the
multifunction display concerning engine oil,
see the “Practical hints” section
(Y page 249).
Adding engine oil
! Only use approved engine oils and oil
filters required for vehicles with
Maintenance System. For a listing of
approved engine oils and oil filters, contact
an authorized Mercedes-Benz Center or
visit www.mbusa.com (USA only).
The following will result in engine or
emission control system damage not
covered by the Mercedes-Benz Limited
Warranty:
RUsing engine oils and oil filters of
specification other than those expressly
required for the Maintenance System.
RChanging of oil and oil filter at change
intervals longer than those called for by
the Maintenance System.
RUsing any oil additives.
Example illustration: SL 550
Example illustration: SL 63 AMG
XUnscrew filler cap \000F from filler neck.XAdd engine oil as required. Be careful not
to overfill with oil.
Be careful not to spill any oil when adding.
Avoid environmental damage caused by oil
entering the ground or water.
Engine compartment183Operation230_AKB; 6; 22, en-USd2ureepe,Version: 2.11.8.12009-07-28T18:49:58+02:00 - Seite 183Z
Page 310 of 316
approximately -35‡ (-37†) and corrosion
protection.
! Add premixed coolant solution only.
Adding water and MB 325.0 Anticorrosion/
Antifreeze separately from each other,
could cause engine damage not covered by
the Mercedes-Benz Limited Warranty.
If the antifreeze mixture is effective to -35‡
(-37† ), the boiling point of the coolant in the
pressurized cooling system is reached at
approximately 266‡ (130†).
The coolant solution must be used year round
to provide the necessary corrosion protection
and increase boil-over protection. Refer to
the Maintenance Booklet for replacement
interval.
Coolant system design and coolant used
determine the replacement interval. The
replacement interval published in the
Maintenance Booklet is only applicable if
MB 325.0 Anticorrosion/Antifreeze solution
or other Mercedes-Benz approved products
of equal specification are used to renew the
coolant concentration or bring it back up to
the proper level.
For information on other Mercedes-Benz
approved products of equal specification,
contact an authorized Mercedes-Benz Center
or visit www.mbusa.com (USA only).
To provide important corrosion protection,
the solution must be at least 50%
anticorrosion/antifreeze (equivalent to
freeze protection to approximately -35‡
[-37†]).
If you use a solution that is more than 55%
anticorrosion/antifreeze (freeze protection
to approximately -49‡ [-45†]), the engine
temperature will increase due to the lower
heat transfer capability of the solution.
Therefore, do not use more than this amount
of anticorrosion/antifreeze.
If the coolant level is low, water and MB 325.0
Anticorrosion/Antifreeze should be used to
bring it up to the proper level (have cooling
system checked for signs of leakage). Pleasemake sure the mixture is in accordance with
label instructions.
The water in the cooling system must meet
minimum requirements, which are usually
satisfied by normal drinking water.
If you are not sure about the water quality,
contact an authorized Mercedes-Benz
Center.
Anticorrosion/antifreeze
Your vehicle contains a number of aluminum
parts. The use of aluminum components in
motor vehicle engines necessitates that
anticorrosion/antifreeze coolant used in
such engines be specifically formulated to
protect the aluminum parts. Failure to use
such anticorrosion/antifreeze coolant will
result in a significantly shortened service life.
Therefore, the following product is strongly
recommended for use in your vehicle:
MB 325.0 Anticorrosion/Antifreeze agent.
Before the start of the winter season (or once
a year in hot southern regions), you should
have the anticorrosion/antifreeze
concentration checked.
The coolant is also regularly checked each
time you bring your vehicle to an authorized
Mercedes-Benz Center for service.
308Fuels, coolants, lubricants, etc.Technical data
230_AKB; 6; 22, en-USd2ureepe,Version: 2.11.8.12009-07-28T18:49:58+02:00 - Seite 308