CD changer NISSAN 350Z 2008 Z33 Quick Reference Guide

TABLE OF CONTENTS
Remote Keyless Entry System..........................2
Windshield Wiper/Washer Switch.......................2
Headlight and Turn Signal Control.......................3
RPM Shift Indicator (manual transmission only)................4
Steering Wheel Switches for Audio Control/Bluetooth

(if so equipped)..................................4
Cruise Control (if so equipped).........................5
Screw-in Recovery Hook.............................5
Auto Climate Control...............................6
Rear Floor Box...................................7
FM/AM/XM
* Radio with CD Changer (if so equipped)...........8
Clock Set/Adjustment...............................9
Trip Computer..................................10
Automatic Transmission (if so equipped)...................10
6-Speed Manual Transmission (if so equipped)...............11
Control Panel Display with Navigation System (if so equipped)......11
Traction Control System (TCS) Off Switch (if so equipped)........12
Front-Passenger Air Bag Status Light....................12
Tire Pressure Monitoring System (TPMS)..................12
Seat Belt Warning Light and Chime......................13
Front Seat Adjustments.............................13
Seatback Tilt Cancel Switch (Roadster only)................13
Power Windows.................................14
Secondary Rear Hatch Release........................14
Mirror Adjustment................................14
Soft Top Operation...............................15
Homelink
Universal Transceiver (if so equipped)..............16
Bluetooth
Hands-Free Phone System (if so equipped)..........17
Navigation System (if so equipped)......................19
This easy-to-use Quick Reference Guide is intended to help you more fully
appreciate some of the unique features and functions of your new vehicle.
However, it is not intended to replace your Owner’s Manual. The Owner’s
Manual contains more detailed information to help you better understand the
important safety warnings, features, operation, and maintenance of your
vehicle.

RPM SHIFT INDICATOR (manual transmission only)
The engine RPM shift indicator light (REV) is located in
the tachometer
. When driving, it indicates ‘shift
point’, or time to up-shift.
Set or deactivate the engine RPM shift point using
the trip computer display.
REV indicator will flash when the engine speed is
within 500 RPM of the set shift point.
REV light will illuminate when the engine speed
matches the set shift point RPM.
STEERING WHEEL SWITCHES FOR AUDIO CONTROL/
BLUETOOTH
(if so equipped)
Press theMODEbutton to turn the radio system on.
PressMODErepeatedly to change to the following
mode:
●Without XM
radio: AM, FM1, FM2, and CD or CD
changer.
●With XM
radio: AM, FM1, FM2, SAT1, SAT2 and
CD changer.
TheSEEKup or down
switch can be used to
perform the following:
●Push the SEEK
switch for less than 1.5 seconds to change the radio frequency.
●Push and hold the SEEK
switch for more than 1.5 seconds to seek the next or
previous broadcasting radio station.
●Push the SEEK
switch while playing a CD for less than 1.5 seconds to change
tracks on the CD.
●If the vehicle is equipped with a CD changer, push and hold the SEEK
switch for
more than 1.5 seconds to change between CDs.
●Push and hold the SEEK
switch for more than 1.5 seconds while playing an MP3
CD to change folders (if multiple folders exist) .
Push theVOLcontrol switch
up or down to increase or decrease the volume.
01
4

FM/AM/XM
* RADIO WITH CD CHANGER (if so equipped)
LOAD BUTTON
LOAD A SINGLE DISC- Press the
button for less than 1.5 seconds. Select the
loading slot by pressing one of the CD insert select button (1-6) , then insert the CD.
LOAD UP TO 6 DISCS- Press and hold the
button for more than 1.5 seconds.
The slot numbers (1-6) will illuminate on the display when CDs are loaded into the
changer.
SCAN BUTTON
Press theSCANbutton to stop at each broadcasting station (FM, AM or XM
) for 5
seconds. Pressing the button again during this 5-second period will stop scan tuning
and the radio will remain tuned to that station. If theSCANbutton is not pressed within
5 seconds, scan tuning moves to the next station.
RADIO BUTTON
Press theRADIOband select button to change the band as follows:
Without satellite radio: AM→FM1→FM2→AM
With satellite radio: AM→FM1→FM2→SAT1→SAT2→AM
EJECT BUTTON
EJECT A SINGLE DISC- Press the
button for less than 1.5 seconds. Select the
eject slot by pressing the CD insert select button (1-6) . The CD will then eject.
EJECT ALL DISCS- Press and hold the
button for more than 1.5 seconds. The
CDs will be ejected one after another.
TUNE/REW/FF BUTTON
To manually tune the radio, press theTUNE/REW/FFbutton.
When theTUNE/REW/FFbutton is pressed while a CD is playing, it will fast forward
or rewind. When the button is released, the CD will play at normal speed.
RPT BUTTON
To change the play pattern of the CD, press theRPTbutton.
8

AUDIO BUTTON
To adjust the Bass, Treble, Fade, Balance, and Audio Pilot, press theAUDIObutton until
the desired mode appears in the display. Then press theTUNE/REW/FFbutton to
adjust to the desired level.
STATION AND CD SELECT BUTTONS
To store a station in a preset you must first select AM, FM1, FM2, SAT1 or SAT2 radio
band by pressing theRADIObutton and tune to the desired FM, AM or XM
station.
Then press and hold the desired station select button for at least 2 seconds. When
the preset indicator illuminates, a beep will sound, indicating memorization is com-
plete. To retrieve a previously set station, select the radio band where the preset was
set, then press the corresponding station select button.
While playing a CD, to select a different CD loaded into the CD changer press one of
the CD select buttons (1-6).
DISP BUTTON
Pressing theDISPbutton will display additional information (for example: Title, Artist
name) .
MP3 PLAYBACK (if so equipped)
In addition to playing audio CDs, the audio system can play MP3 files recorded on
CD-ROM, CD-R, and CD-RW discs. Each disc can have a maximum of 8 folder levels
and 255 folders. A total of 512 MP3 files can be played back. During MP3 playback,
some recorded ID3 tag information can be displayed by pressing theDISPbutton.
Use theTUNE/REW/FFbutton to navigate the MP3 folders.
SEEK/TRACK BUTTON
To scan quickly through each broadcasting station, press theSEEK/TRACKbutton.
To skip from one track to another on a CD, press theSEEK/TRACKbutton. Each
time the button is pressed, the CD will advance or skip back one track.
*XM
Satellite Radio is only available on vehicles equipped with optional XM
satellite
subscription service.
CLOCK SET/ADJUSTMENT
NAVIGATION SYSTEM ONLY (if so equipped)
Press theSETTINGbutton, then select the “Clock”
key using the joystick and press theENTERbutton
to access the following clock settings:
On-screen Clock – When this item is turned to
ON, a clock is always displayed in the upper
right corner of the screen. The clock is automati-
cally adjusted by the GPS system.
Clock Format – Choose either the 12-hour
clock display or the 24-hour clock display.
Offset Adjust – Adjust the time by increasing or decreasing per minute.
Daylight Saving Time – Turn this item to ON for daylight savings time application.
Time Zone – Choose the time zone.
9

FM/AM/XM
RADIO WITH CD CHANGER (if so equipped)
Press and hold theRPTbutton for approximately 2 seconds until the clock display starts
to flash.
Press theSEEK/TRACKbutton to adjust the hours.
Press theTUNE/REW/FFbutton to adjust the minutes.
Press theRPTbutton again to exit the clock set mode.
TRIP COMPUTER
The trip computer may be used to check items such as speed,
outside air temperature, distance to empty (fuel) , average mile-
age and speed, elapsed time and distance traveled. Additionally,
it can function as a stopwatch or be used to operate the RPM
shift feature (REV) (Manual transmission only) .
The twin trip odometer records the distance of individual
trips.
Press the button
to change the display as follows: Trip
A→Trip B→Trip A.
Press and hold the button for more than 1 second to reset
the trip odometer to zero.
TO OPERATE THE TRIP COMPUTER
Turn the ignition switch ON. Then press the side of the buttons.
Press the button
toward the left to scroll through each
mode.
Press the button
toward the left to reset or adjust the various mode selections.
AUTOMATIC TRANSMISSION (if so equipped)
MANUAL SHIFT MODE
When the shift selector lever is shifted from D (Drive)
to the manual shift gate, the transmission enters the
manual shift mode.
In the manual shift mode, shift range is displayed on
the position indicator in the meter.
WHEN SHIFTING UP
Move the shift selector lever to the + (up) side. (Shifts to higher range.)
10