stop start Peugeot iOn 2012 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2012, Model line: iOn, Model: Peugeot iOn 2012Pages: 168, PDF Size: 4.63 MB
Page 4 of 168
.
Contents
Instrument panel 18
Indicator and warning lamps 19
Main battery state of charge indicator 26
Energy consumption / generation
indicator 27
Distance recorder 28
Trip distance recorder 28
Lighting dimmer 29
Ser vice indicator 29
Range indicator 30
Instruments and controlsFamiliarisation
Remote control key 31
Electric windows 34
Doors 35
Boot 36
Charging fl aps 37
Access
Front seats 38
Rear seats 40
Mirrors 42
Interior fi ttings 44
V
entilation 47
Heating 49
Air conditioning 49
Rear screen demist - defrost 52
Comfort
Starting - stopping the vehicle 53
Manual parking brake 54
Drive selector
55
Driving
Lighting controls 57
Automatic illumination of headlamps 59
Headlamp adjustment 59
Wiper controls 60
Courtesy lamp 61
Visibility
Page 17 of 168
.Familiarisation
15
Driving safely
P.
Parking.
Press the brake pedal to come out of this
position. R.Reverse. N. Neutral. D.Drive (forward).
Drive selector
55- Check that the drive selector is in position
P.P- Inser t the key in the ignition switch.
- Turn the key to position 4 (START).- Hold it in this position for a few seconds,until the " READY" lamp comes on,
accompanied by an audible signal.
- Release the key.
The switch returns automatically to
position
3 (ON) .
Starting the motor
53
- Stop the vehicle.
- Keep your foot on the brake pedal.
- Put the drive selector in position P
. P
- Apply the parking brake.
- Turn the key anti-clockwise to the LOCKposition.
Stopping the motor
53
Page 54 of 168
Comfort
52
Switch off the demisting/defrostingof the rear screen and door mirrorsas soon as appropriate, so as to limit electrical consumption and optimise the range of the vehicle.
Front Demist -
Defrost
Rear screen demist - defrost
The control button is located on the right of the centre console.
)Press this button to demist/defrost
the rear screen and (depending
on version) the door mirrors. The
indicator lamp associated with the button comes on.
Pl
ace the air distribution control in
this position.
Switching on
Switchin
g off
The demisting/defrosting switches off automaticallyto prevent an excessive electric consumption. )It is possible to stop the demisting/
defrosting operation before it is switched
off automatically by pressing the button again. The indicator lamp associated withthe button goes off.
For rapid demisting - defrosting, you can also press the "MAX
" button. The intake of exterior air is selected
(indicator
lamp off) and depending on equipment, the air conditioning starts running (indicator lamp on).
Place the temperature control
between "●" and "H".
Pl
ace the air flow control
in the desired position. Front demisting-de
frosting can be used as soon as the "Ready" lamp is on.
Rear screen demistin
g/defrosting can onlyoperate when the "Ready" lamp is on.
Page 55 of 168
4
Driving
53
Starting - stopping the vehicle
- Position 1: LOCK
The steering is locked.
- Position 2: ACC The ancillaries (radio, 12 V socket...) can be used.
- Position 3: ON Ignition on.
- Position 4: STA RT "Ready" lamp on.
Motor ready to drive the vehicle.
Ignition switch
)
Inser t the key in the ignition switch.
)
Turn the key to position 4 (START).
Starting
Stopping
)
Immobilise the vehicle.
)
Place the drive selector in position P.P )
Turn the key to position 1 (LOCK). )
Remove the key from the ignition switch. )Hold it in this position for a few seconds until the " READY"
lampcomes on accompanied by anaudible signal.
)
Release the key.
The key returns automatically to position 3 (ON).
Do not attach any heavy objects to thekey as this could weigh down on it whenin the ignition switch and cause a fault.
If you use the ancillaries for a prolongedperiod (with the key in the ACCposition), you risk discharging the ancillaries battery. Star ting your vehicle will then no longer be possible. Be aware.