buttons TOYOTA xD 2008 Accessories, Audio & Navigation (in English)

SCION V398
iii
For safety reasons, this manual indicates
items requiring particular attention with the
following marks.
CAUTION
This is a warning against anything
which may cause injury to people if
the warning is ignored. You are in-
formed about what you must or must
not do in order to reduce the risk of
injury to yourself and others.
NOTICE
This is a warning against anything
which may cause damage to the ve-
hicle or its equipment if the warning
is ignored. You are informed about
what you must or must not do in or-
der to avoid or reduce the risk of dam-
age to your vehicle and its equip-
ment.
INFORMATION
This provides additional information.
To use this system in the safest possible
manner, follow all the safety tips shown be-
low.
This system is intended to assist in reach-
ing the destination and, if used properly,
can do so. The driver is solely responsible
for the safe operation of your vehicle and
the safety of your passengers.
Do not use any feature of this system to the
extent it becomes a distraction and pre-
vents safe driving. The first priority while
driving should always be the safe opera-
tion of the vehicle. While driving, be sure
to observe all traffic regulations.
Prior to the actual use of this system, learn
how to use it and become thoroughly famil-
iar with it. Read the entire Navigation Sys-
tem Owner’s Manual to make sure you un-
derstand the system. Do not allow other
people to use this system until they have
read and understood the instructions in
this manual.
For your safety, some functions may be-
come inoperable when driving. Unavail-
able touch−screen buttons are dimmed.
Only when the vehicle is not moving, can
the destination and route selection be
done.
Important information about
this manual Safety Instruction

SCION V398
vii
Table of Contents
IABOUT THE AUDIO AND NAVIGATION SYSTEM
Overview of buttons 2........................................
Initial screen 4...............................................
Touch screen operation 5.....................................
Loading and ejecting the map disc (DVD−ROM),
CDs and DVDs 6.............................................
Adjusting the display angle 10.................................
IIBASIC FUNCTIONS

Basic information before operation
Overview of the guidance screen 12............................
Inputting letters and numbers/List screen operation 14............
Function help 17.............................................
Map screen operation18 .....................................
Current position display 18.................................
Screen scroll operation (one−touch scroll) 19..................
Switching the screens 22...................................
Map scale 25.............................................
Foot print map 25.........................................
Orientation of the map 27...................................
I
II
III
IV
V
VI
VII
VIII

SECTIONI
1ABOUT THE AUDIO AND NAVIGATION SYSTEM
SCION V398
ABOUT THE AUDIO AND NAVIGATION
SYSTEM
DOverview of buttons 2......................................
DInitial screen 4............................................
DTouch screen operation 5...................................
DLoading and ejecting the map disc (DVD−ROM),
CDs and DVDs 6..........................................
DAdjusting the display angle 10...............................

2ABOUT THE AUDIO AND NAVIGATION SYSTEM
SCION V398
No.NameFunctionPage
1“MODE” button
Push this button to switch between the
audio (radio, CD, MP3/WMA, AUX,
iPod) and DVD modes, as well as to
turn off the audio system.
124
2“AUDIO” buttonPush this button to display the audio
operation screen.124
3“SOUND” buttonPush this button to adjust and set the
sound quality.127
4“MUTE” buttonPush this button to mute the audio sys-
tem.127
5“TRACK/TUNE”
buttonPush this button to select radio sys-
tem, CD music tracks, iPod music file,
and DVD chapters.134, 137, 142,
144, 151, 164
6“ TILT” button
Push this button to open and close the
display, adjust the angle of the display,
and eject discs.
6, 9, 10
Overview of buttons

5ABOUT THE AUDIO AND NAVIGATION SYSTEM
SCION V398
DMemo information
This system notifies about a memo entry.
At the specified date, the memo informa-
tion will be displayed when the navigation
system is in operation. The memo informa-
tion screen will be displayed every time the
system is turned on.
The memo of the current date can be
viewed by touching “Memo”.(See “ —
Editing a memo” on page 113.)
To disable this screen, touch “Do Not
Display This Message Again.”. This
screen goes off if the screen is not op-
erated for several seconds.
To prevent this information screen from be-
ing displayed again, touch“Do Not
Display This Message Again.”.
To register a memo information, see “Cal-
endar with memo” on page 111.This system is operated mainly by the
touch−screen buttons on the screen.
To prevent damage to the screen, light-
ly touch buttons on the screen with the
finger. When a button on the screen is
touched, a beep sounds.
Do not use objects other than the finger
to touch the screen.
INFORMATION
DIf the system does not respond to
a touch on a touch−screen button,
move the finger away from the
screen and then touch it again.
DDimmed touch−screen buttons
cannot be operated.
DWipe off fingerprints using a glass
cleaning cloth. Do not use chemi-
cal cleaners to clean the touch
screen.
DThe displayed image may become
darker and moving images may be
slightly distorted when the display
is cold.
DUnder extremely cold conditions,
the map may not be displayed and
the data input by a user may be de-
leted. Also, the touch−screen but-
tons may be harder than usual to
depress.
DWhen you look at the screen
through polarized material such as
polarized sunglasses, the screen
may be dark and hard to see. If so,
take off your sunglasses.
Touch screen operation

13BASIC FUNCTIONS
SCION V398
No.NameFunctionPage
7“AAOFF”
Touch this button to obtain a broader view.
Some of the buttons on the screen are not
displayed. They are displayed again by
touching“ON""”.
99
8Zoom in
touch−screen buttonTouch this button to magnify the map
scale.25
9Foot print map
touch−screen buttonTouch this button to display the foot print
map and the building information.25
10Screen configuration
touch−screen buttonTouch this button to change the screen
mode.22
11Distance and time to
destinationDisplays the distance, the estimated trav-
el time to the destination, and the esti-
mated arrival time at the destination.
61
12“GPS” mark (Global
Positioning System)Whenever the vehicle is receiving signals
from the GPS, this mark is displayed.180

23BASIC FUNCTIONS
SCION V398
Depending on the conditions, certain
screen configuration buttons cannot be
selected.
:To display the single map screen.
(See page 23.)
:To display the dual map screen.
(See page 24.)
:To display the compass mode
screen. (See page 24.)
:To display the turn list screen.
(See page 58.)
:To display the arrow screen. (See
page 58.)
:To display the freeway information
screen. (See page 56.)
:To display the intersection guid-
ance screen or the guidance
screen on the freeway. (See page
57.)
DScreen configurations
SINGLE MAP
This is a regular map screen.
While on a different screen, touching
will display the single map screen.
The screen shows the single map.

33DESTINATION SEARCH
SCION V398
U.S.A.
ButtonStates included in the search
area
“US1”
Idaho
Oregon
Washington
“US2”California
Nevada
“US3”
Arizona
Colorado
Montana
New Mexico
Utah
Wyoming
“US4”
Iowa
Kansas
Minnesota
Missouri
North Dakota
Nebraska
South Dakota
“US5”Oklahoma
Texas
“US6”
Illinois
Indiana
Kentucky
Michigan
Ohio
Wisconsin
“US7”
Arkansas
Alabama
Louisiana
Mississippi
Tennessee
“US8”
Connecticut
Massachusetts
Maine
New Hampshire
New Jersey
New York
Rhode Island
Vermont
“US9”
Washington, D.C.
Delaware
Maryland
New Jersey
Pennsylvania
Virginia
West Virginia
“US10”
Florida
Georgia
North Carolina
South Carolina
Canada
ButtonProvinces and areas included
in the search area
“CAN”All provinces and areas in
Canada included in this button.

34DESTINATION SEARCH
SCION V398
Touch the home touch−screen button
on the “Destination” screen.
The screen changes and displays the map
location for home and the route prefer-
ence. (See “Starting route guidance” on
page 50.)
To use this function, it is necessary to set
“Home” for the memory point. (To register
“Home”, see page 89.)
INFORMATION
Guidance starts from the current ve-
hicle position to your home if “Enter”
is touched even while driving.
Touch any of the quick access touch−
screen buttons on the “Destination”
screen.
The screen changes and displays the map
location of the quick access point and the
route preference. (See “Starting route
guidance” on page 50.)
To use this function, it is necessary to set
“Quick Access” for each memory point.
(To register “Quick Access”, see page 86.)
INFORMATION
Guidance starts from the current ve-
hicle position to the quick access
point if “Enter” is touched even while
driving.
— Destination search by
Home— Destination search by
Quick access

44DESTINATION SEARCH
SCION V398
SETTING THE SEARCH POINT FROM
DESTINATIONS
1. Touch the destination buttons at the
bottom of the screen.
When an arrow facing the desired point is
touched, the map scrolls in that direction.
Releasing the finger from the arrow will
stop the scrolling.
2. Touch “Enter”.
The search point is set and the “POI Cate-
gory” screen will be displayed.
DTo search POIs near the search
point
When the search point is set, the “POI
Category” screen will be displayed.
Select the desired POI categories.
“List”:If the desired POI categories have
already been selected, a list of POI will be
displayed from among the selected cate-
gories.
The selected category icon appears on the
top left of the screen.
If the desired POI category is not on the
screen, touch“List All Categories”to list
all POI categories.
Select the desired POI categories from
the list and touch “OK”.
The selected category icon appears on the
top left of the screen.