battery capacity VOLKSWAGEN GOLF 2000 Owners Manual

data covering any ber of successive trips, of how the ignition is off between trips.
age capacity of the total trip memory is:
Driving
time-1
(999
To information. press switch A,
cated on th e to
tr ip memory
The data can be
Ave rage
Distance driven
Average driving speed.
Driving time
one of the stored is exceeded, then
the
be erased and trip
memory, the
erase each memory. Press and
function .
you disconnect the battery, stored be erased .
The
When the ignition is on. 1 or 2 according to which memory
is turned on.
Press the rocker switch Bon the
function.
the ignition. the re main in the
memory
for up to 45 minutes.
faster than about km/h within the 45 m inute period, the
ne w
outside temperatu re be
The temperature range
and + 136 °F ( and +58°C).
When the
temperature may be
the outside temperatures are between
+2 1°F and +39°F (-7°C and
an ice appears in the
onds. then stays on
+21°F (-7°C).
Note
multi-function display
12 -------- --- ---INSTRUMENT PANEL AND

Battery posts, terminals and rela­ted accessories contain lead and
lead components, chemicals known to the
consumed
and the
short distances. Let your WAGEN check the capacity of the ve­
charged battery not
in the engine compartment,
always read and heed WARN­
on pages 35.
The battery is side
(protected by a cover) .
Battery acid
however, to
check the at
First, open the battery cover .
up (see ill ustration).
48 -
----------------CHECKING AND FILLING

Charging rate not over 6 amps.
a charging current of 4.5
amps. be used on a battery rated at
45 Ah. Rated capacity of the battery in your
is on the battery housing.
After charging, first turn off the char ger
and then disconnect charger
When disconnecting and
connecting the battery ...
When you disconnect the battery note the
-the data stored in the MFA
- the facto ry radio
- the one-touch-up and one-touch-down
functions of the power windows* no ger work.
After you reconnect the battery, you must reset the Booklet 3. 1 .
Booklet 3. 1.
The radio must be re-coded with the cor rect
rad io code -see your radio Operating
structions Booklet 3.4.
AND
the make sure the
ig nition and consumers are
switched off.