light Acura MDX 2019 Owner's Manual
[x] Cancel search | Manufacturer: ACURA, Model Year: 2019, Model line: MDX, Model: Acura MDX 2019Pages: 701, PDF Size: 38.75 MB
Page 560 of 701

559Continued
Driving
Multi-View Rear Camera*
About Your Multi-View Rear Camera
The information screen can display your vehicle’s rear view. The display 
automatically changes to the rear view  when the transmission is put into 
(R.
■Multi-View Rear Camera Display Area
1About Your Multi-View Rear Camera
The rear camera view is restricted. You cannot see 
the corner ends of the bum per or what is underneath 
the bumper. Its unique le ns also makes objects 
appear closer or farther than they actually are.
Visually confirm that it is  safe to drive before backing 
up. Certain conditions (such as weather, lighting, and 
high temperatures) may also re strict the rear view. Do 
not rely on the rearview display which does not give 
you all information about conditions at the back of 
your vehicle.
If the camera lens is cove red with dirt or moisture, 
use a soft, moist cloth to keep the lens clean and free 
of debris.
You can change the  Fixed Guideline and  Dynamic 
Guideline settings. 2 Customized Features  P. 360
Fixed Guideline
On:  Guidelines appear when you put the 
transmission into 
( R.
Off:  Guidelines do not appear.
Dynamic Guideline
On:  Guidelines move according to the steering wheel 
direction.
Off:  Guidelines do not move.
Guidelines
Bumper
Camera Approx. 20 inches (50 cm)
Tailgate Open Range Approx. 39 inches (1 m) Wide View Mode
Normal View Mode
Top Down View Mode
Approx. 39 inches 
(1 m)
Approx. 20 inches 
(50 cm)
Tailgate Open Range
* Not available on all models
19 ACURA MDX-31TZ56510.book  559 ページ  2018年12月11日 火曜日 午後4時47分 
Page 571 of 701

570
uuSurround View Camera System*uUsing the Surround View Camera System
Driving
The system may not work properly under the following conditions.
■Surround View Camera System Limitations
ConditionsSolutions
The images may not 
appear clearly when:●You activate the system in bad weather (heavy rain, 
snow, fog, etc.) or in the dark.
●Camera temperatures are high.●A sudden change between lig ht and dark such as an 
entrance or exit of a tunnel.
●You drive into the sunlight (e.g., at dawn or dusk.)
Do not use the surround view camera system but rely 
only on visual confirmation until the conditions allow 
the system to work properly.
●A camera lens is covered with dirt, moisture, or 
debris.
●A camera lens is scratched.
Clean camera lenses with a soft cloth moisturized with 
water, mild detergent or glass cleaner.
The information screen is dirty.Wipe off the screen using a soft dry cloth.
A camera angle is 
altered.A camera or the area around the camera has been 
severely impacted.Do not use the surround view camera system and 
contact a dealer.
An error message is displayed while the  surround view camera system is in use.
19 ACURA MDX-31TZ56510.book  570 ページ  2018年12月11日 火曜日 午後4時47分 
Page 576 of 701

575
Maintenance
This chapter discusses basic maintenance.
Before Performing MaintenanceInspection and Maintenance ............ 576
Safety When Performing Maintenance ..577
Parts and Fluids Used in Maintenance Service...578Maintenance MinderTM..................... 579
Maintenance Under the Hood
Maintenance Items Under the Hood .. 583
Opening the Hood ........................... 584
Engine Compartment Cover ............. 585
Recommended Engine Oil ................ 586
Oil Check ......................................... 587
Adding Engine Oil ............................ 588
Changing the Engine Oil and Oil Filter ...589 Engine Coolant ................................ 591
Transmission Fluid ............................ 593
Brake Fluid ....................................... 594
Refilling Window Washer Fluid......... 594
Replacing Light Bulbs ....................... 595Checking and Maintaining Wiper Blades... 600Checking and Maintaining Tires
Checking Tires ................................. 604
Tire and Loading Information Label .. 605
Tire Labeling .................................... 605
DOT Tire Quality Grading (U.S. Vehicles).. 607Wear Indicators................................ 609
Tire Service Life ................................ 609 Tire and Wheel Replacement ........... 610
Tire Rotation .................................... 611
Winter Tires ..................................... 612
Battery ............................................... 613
Remote Transmitter Care Replacing the Button Battery ........... 615
Remote Control and Wireless  Headphone Care
*........................... 617Climate Control System Maintenance.. 619Cleaning Interior Care .................................... 620
Exterior Care.................................... 622
Accessories and Modifications ........ 625
* Not available on all models
19 ACURA MDX-31TZ56510.book  575 ページ  2018年12月11日 火曜日 午後4時47分 
Page 577 of 701

576
Maintenance
Before Performing Maintenance
Inspection and Maintenance
For your safety, perform all listed inspections and maintenance to keep your vehicle 
in good condition. If you become aware of  any abnormality (noise, smell, insufficient 
brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer. 
(Note, however, that service at a dealer  is not mandatory to keep your warranties in 
effect.) Refer to the separate maintena nce booklet for detailed maintenance and 
inspection information.
■Daily inspections
Perform inspections before long distance  trips, when washing the vehicle, or when 
refueling.
■Periodic inspections
• Check the brake fluid level monthly.
2 Checking the Brake Fluid  P. 594
•Check the tire pressure monthly. Examin e the tread for wear and foreign objects.
2Checking and Maintaining Tires P. 604
•Check the operation of the exterior lights monthly.
2 Replacing Light Bulbs  P. 595
•Check the condition of the wiper bl ades at least every six months.
2Checking and Maintaining Wiper Blades P. 600
■Types of Inspection and Maintenance
1Inspection and Maintenance
Maintenance, replacement, or repair of 
emissions control devices and systems may be 
done by any automotive repair establishment or 
individuals using parts that are “certified” to 
EPA standards.
According to state and fede ral regulations, failure to 
perform maintenance on the maintenance main 
items marked with # will  not void your emissions 
warranties. However, all maintenance services should 
be performed in accordan ce with the intervals 
indicated by the multi-information display (MID).
2 Maintenance Service Items  P. 581
If you want to perform  complex maintenance tasks 
that require more skills a nd tools, you can purchase a 
subscription to the Service Express website at 
www.techinfo.honda.com .
2 Authorized Manuals  P. 685
If you want to perform ma intenance yourself, make 
sure that you have the necessary tools and skills first.
After performing ma intenance, update the records in 
the separate maintenance booklet.
U.S. models
19 ACURA MDX-31TZ56510.book  576 ページ  2018年12月11日 火曜日 午後4時47分 
Page 585 of 701

584
uuMaintenance Under the Hood uOpening the Hood
Maintenance
Opening the Hood
1. Park the vehicle on a level surface, and set 
the parking brake.
2. Pull the hood release handle under the 
driver’s side lower co rner of the dashboard.
u The hood will pop up slightly.
3. Push the hood latch lever (located under 
the front edge of the hood to the center) to 
the side and raise the hood.
Once you have raised the hood slightly, you 
can release the lever.
4. Lift the hood up most of the way.
u The hydraulic supports will lift it up the 
rest of the way and hold it up.
When closing, lower it to approximately 12 
inches (30 cm), then pr ess down firmly with 
your hands.1 Opening the Hood
NOTICE
Do not open the hood when the wiper arms are 
raised. The hood will strike  the wipers, resulting in 
possible damage to the hood and/or the wipers.
Do not press the engine cover forcibly. This may 
damage the engine cover and component parts.
When closing the hood, check that the hood is 
securely latched.
If the hood latch lever moves  stiffly, or if you can 
open the hood without lifti ng the lever, the latch 
mechanism should be cleaned and lubricated.
Do not open the hood while the Auto Idle Stop 
function is activated.
Models with Auto Idle Stop
Hood Release Handle
Pull
Lever
19 ACURA MDX-31TZ56510.book  584 ページ  2018年12月11日 火曜日 午後4時47分 
Page 591 of 701

uuMaintenance Under the Hood uChanging the Engine Oil and Oil Filter
590
Maintenance
4. Remove the oil filter and dispose of the 
remaining oil.
5. Check that the filter ga sket is not stuck to 
the engine contact surface.
u If it is stuck, you must detach it.
6. Wipe away dirt and dust adhering to the 
contact surface of the engine block, and 
install a new oil filter.
u Apply a light coat of new engine oil to 
the filter gasket.
7. Put a new washer on the drain bolt, then 
reinstall the drain bolt.
u Tightening torque:
29 lbf∙ft (39 N∙m, 4.0 kgf∙m)
8. Pour the recommended engine oil into the 
engine.
u Engine oil change capacity (including 
filter):
5.7 US qt (5.4 L)
9. Reinstall the engine oil fill cap securely and 
start the engine.
10. Run the engine for a few minutes, and   
then check that there is no leak from the   
drain bolt or oil filter.
11. Stop the engine, wait for three minutes,   
and then check the oil level on the   
dipstick.
u If necessary, add more engine oil.1Changing the Engine Oil and Oil Filter
You will need a special wrench to replace the oil 
filter. You can buy this wrench from a dealer.
When installing the new oil filter, follow the 
instructions supplied with the oil filter.
Reinstall the engine oil fill  cap. Start the engine. The 
low oil pressure indicator should go off within five 
seconds. If it does not, turn  off the engine, and check 
your work.
Oil Filter
19 ACURA MDX-31TZ56510.book  590 ページ  2018年12月11日 火曜日 午後4時47分 
Page 596 of 701

595
Maintenance
Replacing Light Bulbs
Headlights
Headlights are LED type. Have an authorized Acura dealer inspect and replace the 
light assembly.
Front Turn Signal/Parking, Daytime Running and 
Front Side Marker Lights
Front turn signal/parking, daytime running and front side marker lights are LED type. 
Have an authorized Acura dealer in spect and replace the light assembly.
Fog Lights*
Fog lights are LED type. Have an authoriz ed Acura dealer inspect and replace the 
light assembly.
Side Turn Signal/Emer gency Indicator Lights
Door mirror side turn lights are LED type.  Have an authorized Acura dealer inspect 
and replace the light assembly.
1 Headlights
The headlight aim is set by  the factory, and does not 
need to be adjusted. Howeve r, if you regularly carry 
heavy items in the cargo area or tow a trailer, have 
the aiming readjusted at a dealer or by a qualified 
technician.
* Not available on all models
19 ACURA MDX-31TZ56510.book  595 ページ  2018年12月11日 火曜日 午後4時47分 
Page 597 of 701

596
uuReplacing Light Bulbs uBrake Light and Rear Turn Signal Light Bulbs
Maintenance
Brake Light and Rear Tu rn Signal Light Bulbs
When replacing, use the following bulbs.
1.Remove the cover.
u Starting at the bottom, carefully pull the 
cover straight out, working upward until 
all pins are removed from their 
grommets.
u The grommets should remain in the 
body.
2. Use a Phillips-head screwdriver to remove 
the bolts.
3. Pull the light assembly out of the rear pillar.
Brake Light: 21 W
Rear Turn Signal Light: 21 W 
Bolts
19 ACURA MDX-31TZ56510.book  596 ページ  2018年12月11日 火曜日 午後4時47分 
Page 598 of 701

597
uuReplacing Light Bulbs uTaillights/Rear Side Marker Lights
Maintenance
4. Turn the socket counter-clockwise and 
remove it. Remove the old bulb.
5. Insert a new bulb.
6. Slide the light assembly onto the guide on 
the body.
7. Align the pins with the body grommets, 
then push in until they fully seat.
Taillights/Rear Side Marker Lights
Taillights/rear side marker lights are the LE D type. Have an authorized Acura dealer 
inspect and replace the light assembly.
Bulb Socket
19 ACURA MDX-31TZ56510.book  597 ページ  2018年12月11日 火曜日 午後4時47分 
Page 599 of 701

598
uuReplacing Light Bulbs uBack-Up Light Bulbs
Maintenance
Back-Up Light Bulbs
When replacing, use the following bulbs.
1.Remove the cover by prying on the edge 
using a flat-tip screwdriver.
u Wrap the flat-tip screwdriver with a cloth 
to prevent scratches.
2. Turn the socket counter-clockwise and 
remove it. Remove the old bulb.
3. Insert a new bulb.
Taillights
Taillights are the LED type. Ha ve an authorized Acura dealer inspect and replace the 
light assembly.
Back-Up Light: 21 W
Bulb
Socket
19 ACURA MDX-31TZ56510.book  598 ページ  2018年12月11日 火曜日 午後4時47分