ECO mode Acura RLX HYBRID 2019 Owner's Guide

89
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Road Departure
Mitigation (RDM)
Indicator
●Comes on for a few seconds when
you change the power mode to ON,
then goes off.
●Comes on if there is a problem with
the RDM system.
●Stays on constantly - Have your vehicle
checked by a dealer.
●Comes on when the RDM system
shuts itself off.●Stays on - The temperature inside the
camera is too high.
Use the climate control system to cool down
the camera.
The system activates when the temperature
inside the camera cools down.
2 Front Sensor Camera P. 400
●Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your vehicle
in a safe place, and wipe it off with a soft
cloth.
●Have your vehicle checked by a dealer if the
indicator and message come back on after
you cleaned the area around the camera.
2 Front Sensor Camera P. 400
19 ACURA RLX HYBRID CSS-31TY36500.book 89 ページ ２０１８年３月７日　水曜日　午 後４時１９分

90
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Adaptive Cruise
Control (ACC )
with Low Speed
Follow (LSF)
Indicator (Amber)
• Comes on for a few seconds when
you set the power mode to ON, then
goes off.
• Comes on if there is a problem with
ACC with LSF.• Comes on while driving - Have your
vehicle checked by a dealer.
●Comes on if anything covers the
radar sensor cover and prevents the
sensor from detecting a vehicle in
front.
●May come on when driving in bad
weather (rain, snow, fog, etc.)
●ACC with LSF has been automatically
canceled.
• When the radar sensor gets dirty, stop your
vehicle in a safe place, and wipe off dirt
using a soft cloth.
• Have your vehicle checked by a dealer if the
indicator does not go off even after you
clean the sensor cover.
Adaptive Cruise
Control (ACC )
with Low Speed
Follow (LSF)
Indicator (Green)• Comes on when you press the MAIN
button.
2 Adaptive Cruise Control (ACC) with
Low Speed Follow (LSF) P. 402—
19 ACURA RLX HYBRID CSS-31TY36500.book 90 ページ ２０１８年３月７日　水曜日　午 後４時１９分

91
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Lane Keeping
Assist System
(LKAS ) Indicator
(Amber)• Comes on for a few seconds when
you change the power mode to ON,
then goes off.
• Comes on if there is a problem with
the LKAS.●Stays on constantly - Have your vehicle
checked by a dealer.
Lane Keeping
Assist System
( LKAS ) Indicator
(Green)• Comes on when you press the MAIN
button.2 Lane Keeping Assist System (LKAS)
P. 421
2 Traffic Jam Assist P. 428
—
19 ACURA RLX HYBRID CSS-31TY36500.book 91 ページ ２０１８年３月７日　水曜日　午 後４時１９分

92
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Blind spot
information
System Indicator
•Comes on for a few seconds when
you change the power mode to ON,
then goes off.
• Stays on while the blind spot
information system is turned off.
—
•Comes on when mud, snow, or ice
accumulates in the vicinity of sensor.•Comes on while driving - Remove the
obstacle in the vicinity of sensor.
2 Blind spot information System P. 443
•Comes on if there is a problem with
the system.• Comes on while driving - Have your
vehicle checked by a dealer.
Collision
Mitigation
Braking System
TM
(CMBSTM)
Indicator
• Comes on for a few seconds when
you change the power mode to ON,
then goes off.
• Comes on when you deactivate the
CMBS
TM. A multi-information display
message appears for five seconds.
• Comes on if there is a problem with
the CMBS
TM.
• Stays on constant ly without the
CMBSTM off - Have your vehicle checked by
a dealer.
2 Collision Mitigation Braking SystemTM
(CMBSTM) P. 458
19 ACURA RLX HYBRID CSS-31TY36500.book 92 ページ ２０１８年３月７日　水曜日　午 後４時１９分

94
uuIndicators uMulti-Information Display Warn ing and Information Messages
Instrument Panel
Multi-Information Display Warn ing and Information Messages
The following messages appear only on the multi-information display. Roll the ri ght selector wheel to see the message again wit h the
system message indicator on.
MessageConditionExplanation
• Appears when the vehicle is no longer able to run due
to its malfunction.• Immediately stop in a safe place.
• Have your vehicle checked by a dealer immediately.
•Appears if you cannot select (P due to a malfunction.• While the vehicle is stoppe d, apply the parking brake.
• Depending on the circumstances, you can set the
power system to ON as an emergency measure.
2 If the Transmission System Indicator Blinks along
with the Warning Message P. 571
•Have your vehicle checked by a dealer.
•Appears if the transmission is in a position other than
(N and a malfunction is preventing the system from
starting.
• Depending on the circumstances, you can set the
power system to ON as an emergency measure.
2 If the Transmission System Indicator Blinks along
with the Warning Message P. 571
•Have your vehicle checked by a dealer.
•Appears when you set the power mode to ON again
and the vehicle is able to run.
2 Turning on the Power P. 378
19 ACURA RLX HYBRID CSS-31TY36500.book 94 ページ ２０１８年３月７日　水曜日　午 後４時１９分

96
uuIndicators uMulti-Information Display Warn ing and Information Messages
Instrument Panel
MessageConditionExplanation
•Appears if there is a problem with transmission and it is
not possible to select
(R.
•Have your vehicle checked by a dealer.
•Appears if you depress the accelerator pedal when the
transmission is in
(N.
•Release the accelerator peda l. After that, depress the
brake pedal and change the transmission position.
• Appears when you press and hold the (N button for
more than two seconds.• Disappears when you set the gear position to other
than
(N.
2 If you want to keep the transmission in (N
position (car wash mode) P. 389
• Appears when you change to (N, then release the (N
button.
2 If you want to keep the transmission in (N
position (car wash mode) P. 389
• All gear positions come on when the transmission is
operated.• Acceleration is not possible while the indicator is on.
• Goes off a few seconds later if there is no problem.
• After the indicator goes off, you can drive normally.
19 ACURA RLX HYBRID CSS-31TY36500.book 96 ページ ２０１８年３月７日　水曜日　午 後４時１９分

97
uuIndicators uMulti-Information Display Warning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
●Appears when there is a prob lem with the sensor on the
12-volt battery.●Have your vehicle checked by a dealer.
2 Checking the 12-Volt Battery P. 529
●Appears when the starter system has a problem.●As a temporary measure, press and hold the POWER
button for up to 15 second s while depressing the brake
pedal and manually turn on the power system.
Have your vehicle checked by a dealer.
●Appears after the driver’s door is opened when the
power mode is in ACCESSORY.●Press the POWER button twice with your foot off the
brake pedal to change the power mode to VEHICLE
OFF.
●Appears when the power mode is in ACCESSORY.
—
U.S.
Canada
19 ACURA RLX HYBRID CSS-31TY36500.book 97 ページ ２０１８年３月７日　水曜日　午 後４時１９分

98
uuIndicators uMulti-Information Display Warn ing and Information Messages
Instrument Panel
MessageConditionExplanation
●Appears when you close the door with the power mode
in ON without the keyless access remote inside the
vehicle.●Disappears when you bring the keyless access remote
back inside the vehicle and close the door.
2Keyless Access Remote Reminder P. 154
●Appears when the keyless access remote battery
becomes weak.●Replace the battery as soon as possible.
2Replacing the Button Battery P. 530
●Appears if the keyless access remote battery is too weak
to turn on the power system or the key is not within
operating range to turn on the power system.
A beeper sounds six times.●Bring the keyless access remote in front of the POWER
button to be touched with.
2 If the Keyless Access Remote Battery is Weak P. 560
●Appears three seconds after you bring the keyless
access remote in front of the POWER button when To
Start, Hold Remote Near Start Button appears. To
Start Vehicle: Brake + Push appears sequentially.●Unless you bring the keyless access remote in front of
the POWER button, this message does not appear.
2If the Keyless Access Remote Battery is Weak P. 560
●Appears when you set the power mode to ACCESSORY
or ON.
2Turning on the Power P. 378
●Appears if you press the POWER button while the
vehicle is moving.●The message will disappear after six seconds or when
the power mode is set to VEHICLE OFF.
19 ACURA RLX HYBRID CSS-31TY36500.book 98 ページ ２０１８年３月７日　水曜日　午 後４時１９分

99
uuIndicators uMulti-Information Display Warning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
• Appears when you set the power mode to ON without
fastening the driver’s seat belt.
• Appears when you change the gear position after
(P
has been automatically select ed with the driver’s door
open, the driver’s seat belt unfastened, then the brake
pedal is released.
• Fasten the seat belt properly before you start to drive.
2 Shift Operation P. 387
•Appears when you try to change the gear position
without depressing the brake pedal.•Depress the brake pedal, then select a shift button.
•Appears when you try to change the gear position
without releasing your foot off the accelerator pedal.•Release your foot off the acce lerator pedal, then select
a shift button.
• Appears when the parking bu tton is pressed while the
vehicle is moving.
• Appears if you change the gear position to
(R while the
vehicle is moving forward, or to
(D while the vehicle is
reversing.
• Make sure that the vehicle comes to a stop before
operating the select button.
19 ACURA RLX HYBRID CSS-31TY36500.book 99 ページ ２０１８年３月７日　水曜日　午 後４時１９分

100
uuIndicators uMulti-Information Display Warn ing and Information Messages
Instrument Panel
MessageConditionExplanation
•Appears if there is a proble m with the electric system.
• Appears when you set the power mode to OFF while
driving.• Immediately stop in a safe place and set the parking
brake.
• Continue driving if the message goes off soon after.
• If there is a problem with the transmission system, the
transmission system indicator comes on.
2 Transmission System Indicator P. 82
•Appears if you press the POWER button within five
seconds of putting the transmission into
(N.
• The transmission remains in (N for 15 minutes, then
automatically switches to
(P.
2 If you want to keep the transmission in (N
position (car wash mode) P. 389
• Appears if the vehicle is st opped and the driver’s seat
belt is unfastened, as there is a possibility that the
vehicle may roll.• When the vehicle is idling or when you are parking or
exiting the vehicle, put the transmission into
(P before
releasing the brake pedal.
2 Shift Operation P. 387
•Appears if any door or the trunk is not completely
closed.
• Appears if any door or the trunk is opened while
driving. The b eeper sounds.•Goes off when all doors and the trunk are closed.
•Appears if there is a proble m with the acoustic vehicle
alerting system.• Have your vehicle checked by a dealer immediately.
19 ACURA RLX HYBRID CSS-31TY36500.book 100 ページ ２０１８年３月７日　水曜日　午後４時１９分