buttons Acura TL 2008 Owner's Manual

Î
Î
On models with navigation system shown
Your Vehicle at a Glance
Your Vehicle at a Glance
3
POWER DOOR
LOCKS DRIVING POSITION
MEMORY SYSTEMAUTOMATIC TRANSMISSION
MIRROR CONTROLS
(P.108)
(P.96)
(P.112)
(P.259)
(P.239)
(P.237) (P.9)
(P.107)
FUEL FILL DOOR
RELEASE HANDLE
INSTRUMENT PANEL
INDICATORS
GAUGES
PASSENGER’S
FRONT AIRBAG
POWER WINDOW
SWITCHES
HOOD RELEASE
HANDLE
CEILING CONSOLE
DRIVER’S FRONT AIRBAG
(P.9)
TRUNK RELEASE
BUTTON (P.97)
(P.118) (P.189)
(P.115)
:
CEILING LIGHT
HOMELINK
BUTTONS
MOONROOF SWITCH (P.57)
AUDIO SYSTEM
(P.133)CLOCK
(P.116)
MANUAL TRANSMISSION
(P.256) CLIMATE CONTROL
SYSTEM
(P.126)
(P.65)
 — —
y
y
(% y   y
2008 TL

Î
ÎTo use the horn, press the center pad of the steering wheel.
:
Your Vehicle at a Glance
4
HAZARD WARNING
BUTTON
HEADLIGHTS/TURN SIGNALS/
FOG LIGHTS
REAR WINDOW
DEFOGGER
BUTTONCRUISE
CONTROL
BUTTONS
SEAT HEATER
SWITCHES
HORN
STEERING WHEEL
ADJUSTMENT
(P.86,89)
(P.91)(P.183) (P.192)(P.111)
(P.186)
(P.90)
(P.90)
WINDSHIELD WIPERS/
WASHERS
PASSENGER AIRBAG OFF INDICATOR
(P.60)
BLUETOOTH
HANDSFREELINKBUTTONS
(P.85)
REMOTE AUDIO CONTROL
BUTTONS
INSTRUMENT PANEL
BRIGHTNESS
(P.89)
VEHICLE STABILITY
ASSIST (VSA) OFF
SWITCH
MIRROR CONTROLS
(P.107)
(P.271)
\f—\f—
y

\fy
(%\fy\f\f\fy
2008 TL

Î
Î
On models with navigation system shown
Control L ocations
56
DRIVING POSITION
MEMORY
POWER DOOR LOCKSCLIMATE CONTROL
SYSTEM
AUDIO SYSTEM
FUEL FILL DOOR
RELEASE HANDLE MANUAL TRANSMISSION
AUTOMATIC TRANSMISSION
(P.108)
(P.96)
(P.112) (P.107)(P.126)
(P.133)
(P.259)
(P.256)
(P.239)
(P.237)
POWER WINDOW
SWITCHES
MIRROR
CONTROLS
HOOD RELEASE
HANDLECLOCK
(P.116)
CEILING CONSOLE
(P.97)
:
CEILING LIGHT
MOONROOF SWITCH TRUNK RELEASE
BUTTON
(P.118)
HOMELINK
BUTTONS (P.189) (P.115)
\f—\f—
y
y
(%\fy\f\f
y
2008 TL

ÛÝÛÝ
The multi-inf ormation display in the
instrument panel displays various
inf ormation and messages when the
ignition switch is in the ON (II)
position. Some of the messages help
you operate your vehicle more
comf ortably.
Others help to keep you aware of the
periodic maintenance your vehicle
needs f or continued trouble-f ree
driving.
When you open the driver’s door, a
‘‘Welcome’’ message is shown on the
multi-inf ormation display.
To change the display, press the
INFO( / )buttononthesteering
wheel repeatedly until the main
menu appears (see page ).With the ignition switch in the ON
(II) position, the multi-inf ormation
display changes as shown on page
each time you press the INFO
( / ) button or SEL/RESET
button.
When you turn the ignition switch to
the ON (II) position, what you last
selected is displayed.
In the multi-information display, the
system message is also displayed
(see page ) and you can
customize your vehicle control
settings (see page ).
69 69
6877
Multi-Inf ormation Display
66
SEL/RESET
BUTTON
INFO BUTTONS
\f—\f—
y
\f

y
(%\fy\f\f
y
2008 TL

Î
ÎTo use the horn, press the center pad of the steering wheel.
:
Controls Near the Steering Wheel
84
HAZARD WARNING BUTTON
HEADLIGHTS/TURN SIGNALS/
FOG LIGHTS
SEAT HEATER
SWITCHES
HORN
MIRROR CONTROLS STEERING WHEEL ADJUSTMENTREMOTE AUDIO
CONTROL BUTTONS CRUISE CONTROL
BUTTONS
VEHICLE STABILITY
ASSIST (VSA) OFF
SWITCH (P.86,89)
(P.89)
(P.271)
(P.107) (P.91)(P.183) (P.85)
(P.90)
(P.111)
(P.192)
INSTRUMENT PANEL
BRIGHTNESS
WINDSHIELD
WIPERS/WASHERS
(P.186)
REAR WINDOW
DEFOGGER BUTTON
(P.90)
BLUETOOTH
HANDSFREELINKBUTTONS
\f—\f—
y

\fy
(%\fy\f\fy
2008 TL

Customized settings
(see page ).
Driving position memory
(see page ).
When you unlock the driver’s door
with a remote, that remote’s keyless
memory settings are activated.
Depending on which remote was
used, a WELCOME DRIVER 1 or
WELCOME DRIVER 2 message
appears on the multi-inf ormation
display. The driver’s ID (MEMORY
1 or MEMORY 2) is printed on the
back of each remote. Here are the settings activated by
the remote;
When you unlock and open the
driver’s door with the remote, the
driver’s seat (except power lumbar)
and outside mirrors move to the
positions stored in memory. An
indicator on one of the driving
position memory buttons also comes
on.
To turn of f this f eature, press and
hold the LOCK and UNLOCK
buttonsatthesametime.TheLED
in the remote will blink twice. Then
release the buttons. Doing this
cancels the keyless memory settings
f or that remote and restores the
def ault settings.
To turn the keyless memory settings
back on, repeat this procedure. The
LED will blink once to indicate the
f eature has been turned on.
77
108
K eyless Memory Settings
Remote Transmitter
102
TM
\f—\f—
y
\fy
(%\fy\f
\fy
2008 TL

Two seat and outside mirror
positionscanbestoredinseparate
memories. You select a memorized
position by pushing the appropriate
button or using the appropriate
remote transmitter (Driver 1 or
Driver 2).Adjust the outside mirrors f or best
visibility (see page ).
Adjust the seat to a comfortable
position (see page ).
Turn the ignition switch to the ON
(II) position. You cannot add a
new driving position to the
memory unless the ignition switch
is in the ON (II) position. You can
recall a memorized position with
the ignition switch in any position.
Store a driving position only when
the vehicle is parked.
Your vehicle has a memory feature
f or the driver’s seat and outside
mirror positions.
Press and release the MEMO
button on the driver’s door. You
will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator in the
memory button will come on. The
current positions of the driver’s
seat and outside mirrors are now
stored.
3.
1.
2.
107
103
Storing a Driving Position in
Memory
Driving Position Memory System
108
MEMO BUTTON
MEMORY BUTTONS
\f—\f—
y
\fy
(%\fy\f

y
2008 TL

Doing any of the f ollowing af ter
pressing the MEMO button will
cancel the storing procedure.Not pressing a memory button
within 5 seconds.
Readjusting the seat position.
Readjusting the outside mirror
position.
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button’s memory. If
you want to add a new position while
retaining the current one, use the
other memory button. To select a memorized position, do
this:
Make sure the parking brake is set
(M/T) or the shif t lever is in Park
(A/T).
Press the desired memory button
(1 or 2) until you hear a beep, then
release the button. The system will move the seat and
outside mirrors to the memorized
positions. The indicator in the
selected memory button will f lash
during movement. When the
adjustments are complete, you will
hear two beeps, and the indicator will
remain on.
If the parking brake is not set, you
must press and hold the memory
button until the adjustment is
complete.
You cannot select a memorized
position if the transmission is in
reverse. Shif t to another gear,
then select a position.
1.
2.
Notes f or vehicles with M/T
CONT INUED
Selecting a Memorized Position
Driving Position Memory System
Inst rument s and Cont rols
109
MEMORY BUTTONS
\f—\f—
y
\fy
(%\fy\f

y
2008 TL

Vents, Heating, and A/C
126
AIR CONDITIONING BUTTON
RECIRCULATION BUTTON
PASSENGER’S SIDE MODE
CONTROL BUTTON
PASSENGER’S AUTO BUTTON
WINDSHIELD
DEFROST BUTTON
PASSENGER’S SIDE
TEMPERATURE
CONTROL BUTTONS
REAR WINDOW DEFOGGER BUTTON
DRIVER’S SIDE MODE
CONTROL BUTTON
OFF BUTTON
FAN CONTROL
BUTTONS DUAL BUTTON
DRIVER’S SIDE
TEMPERATURE
CONTROL BUTTONS TEMPERATURE DISPLAY
DRIVER’S AUTO BUTTON
Vehicles without navigation system
\f—\f—
y
\f\fy
(%\fy\f

y
2008 TL

Vents, Heating, and A/C
Features
127
REAR WINDOW DEFOGGER BUTTON
OFF BUTTON
WINDSHIELD
DEFROST BUTTON
FAN CONTROL
BUTTONS
DUAL BUTTON
RECIRCULATION BUTTON
AIR CONDITIONING
BUTTON
DRIVER’S SIDE MODE
CONTROL BUTTON DRIVER’S AUTO BUTTON TEMPERATURE DISPLAY PASSENGER’S AUTO BUTTON
Vehicles with navigation system
PASSENGER’S SIDE
MODE CONTROL BUTTON
PASSENGER’S SIDE
TEMPERATURE
CONTROL BUTTONS
DRIVER’S SIDE
TEMPERATURE
CONTROL BUTTONS
\f—\f—
y
\fy
(%\fy\f
y
2008 TL