center console AUDI A4 1995 B5 / 1.G Parking Brake Lever Workshop Manual
Page 1 of 6
46-38
Parking brake lever, removing
and installing
Additional information
Repair Manual, Body-Exterior
Repair Manual, Body-Interior
Removing
- Remove rear part of center console.
Repair Manual, Body
-Interior, Repair Group
68
Installing - Remove hex nuts -1-.
- Use screwdriver to push parking brake cable inward, and remove
parking brake lever.
- Install parking brake cable into adjustment bracket.
- Tighten hex nuts -1- to 25 Nm (18 ft lb).
Pa
ge 1 of 6 Parkin
g brake lever, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.46.5
Page 2 of 6
Repair Manual, Body
-Interior, Repair Group 68
- Adjust parking brake page 46
-39
.
- Install rear part of center console.
Pa
ge 2 of 6 Parkin
g brake lever, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.46.5
Page 4 of 6
68
- Remove any plastic parts at compensating bar;
they do not need to be re-installed.
- Use size 2 screwdriver to lock compensating bar in place to prevent it
from turning (shown without center console to simplify illustration).
Pa
ge 4 of 6 Parkin
g brake lever, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.46.5