spare wheel AUDI A4 2000 B5 / 1.G Quattro Fuel Syst
Page 21 of 55
20-72
WARNING!
Fuel system is under pressure! Before
opening, place clean cloths around the
connections to be opened. Carefully loosen
the connections to relieve pressure.
- From bottom of vehicle, mark supply line -1-, return line -3- and bleed
line to EVAP canister and disconnect -2-.
- Remove the EVAP canister cover near bottom of spare wheel well
Page 20
-130
.
- Loosen hose connections -1- and -2- on bleed lines.
- Unclip line from bracket -arrow-.
- Place VAG1383A engine and transmission jack under the fuel tank for
support.
- Mark installed position of the clamp bands.
Pa
ge 21 of 55 Fuel su
pp
ly system, servicin
g (vehicles with all wheel drive and 1.8 ltr. turbo or 2.8 ltr. en
gine
)
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.3
Page 26 of 55
20-77
Tightening torques
Component
Nm
Clamp bands and/or carrier plate (for fuel
tank) on chassis 25
Nm
Clamp bands on fuel tank 2 Nm
Carrier plate on fuel tank 2 Nm
Cover on spare wheel well 10
Nm
Pa
ge 26 of 55 Fuel su
pp
ly system, servicin
g (vehicles with all wheel drive and 1.8 ltr. turbo or 2.8 ltr. en
gine
)
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.3