lock CHEVROLET UPLANDER 2007 1.G Owners Manual

Seats and Restraint Systems....................... 7
Front Seats
.............................................. 9
Rear Seats
............................................. 13
Safety Belts
............................................ 32
Child Restraints
...................................... 56
Airbag System
........................................ 96
Restraint System Check
....................... 114
Features and Controls.............................. 117
Keys
..................................................... 119
Doors and Locks
.................................. 128
Windows
............................................... 143
Theft-Deterrent Systems
....................... 145
Starting and Operating Your Vehicle
..... 150
Mirrors
.................................................. 165
OnStar
®System
................................... 167
Universal Home Remote System
.......... 169
Storage Areas
...................................... 180
Instrument Panel....................................... 189
Instrument Panel Overview
................... 192
Climate Controls
................................... 217Warning Lights, Gages, and
Indicators
.......................................... 230
Driver Information Center (DIC)
............ 249
Audio System(s)
................................... 284
Driving Your Vehicle................................. 371
Your Driving, the Road, and Your
Vehicle
.............................................. 372
Towing
................................................. 410
Service and Appearance Care.................. 423
Service
................................................. 426
Fuel
...................................................... 428
Checking Things Under the Hood
......... 436
Bulb Replacement
................................ 471
Windshield Wiper Blade Replacement
... 476
Tires
..................................................... 477
Appearance Care
.................................. 517
Vehicle Identication
............................. 526
Electrical System
.................................. 526
Capacities and Specications
................ 533
2007 Chevrolet Uplander Owner ManualM
1

Front Seats
Manual Seats
Use the lever located on
the front of the seat to
adjust the seat
forward or rearward.
Pull up on the lever to
unlock the seat.
Slide the seat to where
you want it and
release the lever.
{CAUTION:
You can lose control of the vehicle if you
try to adjust a manual driver’s seat while
the vehicle is moving. The sudden
movement could startle and confuse you,
or make you push a pedal when you do
not want to. Adjust the driver’s seat only
when the vehicle is not moving.
To make sure the seat is locked into place, try to
move the seat back and forth with your body.
9

Reclining Seatbacks
{CAUTION:
You can lose control of the vehicle if you
try to adjust a manual driver’s seat while
the vehicle is moving. The sudden
movement could startle and confuse you,
or make you push a pedal when you do
not want to. Adjust the driver’s seat only
when the vehicle is not moving.
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.Your seats have manual reclining seatbacks. The
lever used to operate them is located on the
outboard side of the seats.
1. Lift the recline lever.
2. Move the seatback to the desired position,
then release the lever to lock the seatback
in place.
3. Push and pull on the seatback to make sure it
is locked.
11

To return the seatback to an upright position, do
the following:
1. Lift the lever fully without applying pressure to
the seatback and the seatback will return to
the upright position.
2. Push and pull on the seatback to make sure it
is locked.
{CAUTION:
Sitting in a reclined position when your
vehicle is in motion can be dangerous.
Even if you buckle up, your safety belts
cannot do their job when you are reclined
like this.
The shoulder belt cannot do its job
because it will not be against your body.
Instead, it will be in front of you. In a
crash, you could go into it, receiving neck
or other injuries.
The lap belt cannot do its job either. In a
crash, the belt could go up over your
abdomen. The belt forces would be there,
not at your pelvic bones. This could cause
serious internal injuries.
For proper protection when the vehicle is
in motion, have the seatback upright.
Then sit well back in the seat and wear
your safety belt properly.
Do not have a seatback reclined if your vehicle is
moving.
12

Fold and Tumble Feature
{CAUTION:
Using the third row seating position while
the second row is folded, or folded and
tumbled, could cause injury in a sudden
stop or crash. Be sure to return the seat
to the passenger seating position. Push
and pull on the seat to make sure it is
locked into place.
The second row bucket seats can be folded and
tumbled forward. Use this feature for exiting
and entering third row seats, if the vehicle
has them.
1. Make sure the adjustable head restraints are
in the fully lowered position.
Notice:Folding a rear seat with the safety
belts still fastened may cause damage to the
seat or the safety belts. Always unbuckle
the safety belts and return them to their normal
stowed position before folding a rear seat.2. Fold the seatback
at on the seat.
You can do this by either pulling on the nylon
strap, located on the rear right hand side
of the seat, or by lifting the recline lever,
located on the front right hand side of the
seatback.
3. Slide the seat all the way back in this position.
14

4. Release the rear set
of seat hooks from
the oor pins by
pulling the
nylon strap, located
at the base of
the seat. Use the
strap to guide
the seat forward.
To return the seat to the original position, do the
following:
1. Align the seat so that the rear hooks on the
seat are over the rear oor pins. Push down
rmly on the rear of the seat so that the
rear hooks attach to the rear oor pins.
2. Try to raise the seat to check that it is locked
to the oor.3. Pull the nylon strap, located on the rear right
hand side of the seat, or lift the recline lever,
located on the front right hand side of the
seatback, to raise the seatback to the upright
position.
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
4. Push and pull on the seatback to check that it
is locked.
One of the bucket seats may be equipped with a
built-in child restraint. SeeBuilt-In Child
Restraint on page 85.
15

Adjusting the Bucket Seats Forward
and Rearward
There are two adjustment levers on the second
row bucket seats that enable them to move
forward or rearward.
One is located below the front of the seat.The other lever is
located on the rear of
the seat.
To adjust the second row bucket seats forward or
rearward, do the following:
1. Lift up either lever and slide the seat forward
or rearward.
2. Release the lever when the seat is in the
desired position.
3. Push and pull on the seat to make sure it is
locked.
16

Folding or Reclining the Seatbacks
The seatback on a bucket seat can either
be folded forward or reclined using the nylon strap
or the recline lever.
To fold the seatback forward, do the following:
1. Pull the nylon strap, located on the rear right
hand side of the seat, or lift the recline lever,
located on the front right hand side of the
seatback to release the seatback.Notice:Folding a rear seat with the safety
belts still fastened may cause damage to the
seat or the safety belts. Always unbuckle
the safety belts and return them to their normal
stowed position before folding a rear seat.
2. Fold the seatback forward.
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
To raise the seatback to the upright position from
a reclined position, do the following:
1. Pull the nylon strap or lift the recline lever
while raising the seatback until it locks to
the upright position.
2. Push and pull on the seatback to check that it
is locked.
Nylon StrapRecline Lever
17

5. To release the front seat hooks from the oor
pins, squeeze the angled bar, located beneath
the seat toward the straight crossbar.
6. Remove the seat by rocking it slightly forward,
then toward the rear of the vehicle while
pulling it out. This should be done in
one motion.
Reinstalling the Bucket Seats
{CAUTION:
A safety belt that is improperly routed, not
properly attached, or twisted will not
provide the protection needed in a crash.
The person wearing the belt could be
seriously injured. After installing the seat,
always check to be sure that the safety
belts are properly routed and attached,
and are not twisted.
Do not install the seat facing the rear of the
vehicle, as it will not lock into place. If more
storage room is needed behind the seat, slide the
seat forward.
Make sure the seat is in the full rear position
before beginning this procedure.
19

{CAUTION:
A seat that is not locked into place
properly can move around in a collision or
sudden stop. People in the vehicle could
be injured. Be sure to lock the seat into
place properly when installing it.
4. Check that the seat is locked by trying to
raise the seat.
5. Pull the nylon strap, located on the rear right
hand side of the seat, or lift the recline lever,
located on the front right hand side of the
seatback, to raise the seatback to the upright
position.
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
6. Push and pull on the seatback to make sure
that it is locked.
21