driver seat adjustment CITROEN BERLINGO FIRST 2011 Handbook (in English)

5 FAMILIARISATION
-
INSTRUMENTS AND CONTROLS


12.
Wiper/screenwash controls.

13.
Audio system steering mounted
controls.

14.
Steering lock and ignition.

15.
Fusebox.

16.
Passenger’s airbag deactivation
switch.

17.
Alarm.

18.
Steering wheel adjustment
control.

19.
Passenger’s electric mirror
control.

20.
Headlamp height adjustment.

21.
Heated seats control.

22.
Parking brake.

23.
Cigarette lighter.

24.
Portable ashtray.
25.
Gear lever.

26.
Storage compartment.

27.
Heating/air conditioning controls.

28.
Audio system.

29.
Lower glove box.

30.
Upper glove box or passenger’s
airbag.

31.
Bonnet release lever.

32.
Side adjustable heating/
ventilation vents.

33.
Door window demisting vents.

1.
Speaker (tweeter).

2.
Windscreen demisting vents.

3.
Controls:


- Electric windows.

- Rear door windows demisting.

- Air conditioning.

4.
Central locking button.

5.
Multifunction screen or clock.

6.
Hazard warning lamps switch.

7.
Central adjustable heating/
ventilation vents.

8.
Lighting and direction indicator
control stalk.

9.
Speed limiter/cruise control
switches.

10.
Instrument panel.

11 .
Driver’s airbag.
Horn.

FAMILIARISATION10 -
STEERING WHEEL HEIGHT ADJUSTMENT


)
When stationary, push the control
A
forwards to release the steering
wheel adjustment mechanism.

)
Adjust the height of the steering
wheel.

)
Lock the steering wheel adjust-
ment it by pulling control A
to-
wards you fully.


1.
Driver’s electric window.


2.
Passenger’s electric window.




DOOR MIRRORS



)
Move the manual control 3
in all
four directions to adjust.


Electric control for the
passenger’s side mirror


)
From the driver’s seat, adjust in
all four directions by operating
the control 4
.
Manual mode:


)
Press the switch. The window
stops as soon as the switch is re-
leased.


Automatic mode (driver):


)
Press and hold the switch. One
touch completely opens or closes
the window.



54




55



58

33SEATS-
FRONT SEATS



The adjustment is correct when
the upper edge of the head re-
straint is level with the top of the
head.


To remove the head restraint, place it
in the top position, press the tabs and
pull it upwards.
To put it back in position, locate the
stems of the restraint in the holes,
taking care to keep them in line with
the seat back.
No person or object must pre-
vent the seat from returning
to its initial position; return to
this position is necessary for
the seat to lock in place.

4. Forwards-backwards
adjustment
Lift the control and slide the seat for-
wards or backwards.
1. Head restraint height
adjustment
To raise or lower the restraint, slide it.

2. Armrests
These can be folded back.
3. Seat back angle adjustment

5. Storage drawer (version with
passenger airbag)
There is a storage drawer under the
front passenger seat.
To open it, lift it and pull.
6. Heated seats switch
Press the switch. The temperature is
controlled automatically.
Pressing the switch again stops
operation.

Note:
the command for activation
of heating of the seat(s) remains
memorised for two minutes after the
ignition has been switched off.

7. Access to rear seats
(version with one
sliding side door only)
Do not place heavy objects
in the drawers.

A.
Turn the knob.

B.
Pull the lever (version
with one sliding side
door only).

Never drive with the head re-
straints removed; they must
be in place and correctly ad-
justed. Lift the control to fold the seat back
and move the seat forwards.
On repositioning, the seat returns to
its initial position (driver's side).

LIFE ON BOARD
58 -
STEERING WHEEL HEIGHT
ADJUSTMENT HEADLAMP ADJUSTMENT
HORN
HAZARD WARNING LIGHT
S
Press the button, the direction indicators
fl ash.

They can operate with the ignition off. Press one of the spokes or
the centre of the steering
wheel.


0 -
With no load.

1 -
With partial load.

2 -
With average load.

3 -
With maximum authorised load.


0
- 1 or 2 people in the front seats.

- - 3 people.

1
- 5 people.

2 -
5 people + maximum authorised
load.

3 -
Driver + maximum authorised
load.

Initial setting is position 0.

Depending on the load in your vehicle,
it is recommended that the headlamp
beam is adjusted. When stationary, lower the handle to
unlock the steering wheel.
Adjust to the desired height and
lift the handle to lock the steering
wheel.