height adjustment Citroen BERLINGO FIRST DAG RHD 2009 1.G Owner's Manual

5FAMILIARISATION-
INSTRUMENTS AND CONTROLS

12. Windscreen demisting vents.

13. Speaker (tweeter).

14. Door window demisting vents.

15. Side adjustable heating/
ventilation vents.

16.
Passenger air bag disarming control.

17. Upper glove box or passenger air bag.

18. Lower glove box.

19. RD3 audio equipment.

20. Heating/air conditioning controls.

21. Storage compartment.

22. Movable ashtray.

23. Gear lever.

24. Lighter.

25. Handbrake.
26. Heated seats control.

27. Steering lock and ignition.

28. Steering wheel adjustment
control.

29. Bonnet release.

30. Fuse box.

31. Headlamp height adjustment.

32. Passenger's electric mirror
control.

1. Speed limiter/cruise control
switch.

2. Lights and direction indicators
controls.

3. Driver's air bag.
Horn.

4. Instrument panel.

5. Audio equipment steering wheel
control.

6. Wipers/wash-wipe controls.

7. Central adjustable heating/
ventilation vents.

8. Hazard warning lights switch.

9. Multifunction display or clock.

10. Central locking button.

11. Controls:
- Electric windows.
- Rear door windows or tailgate demisting.
- Air conditioning.

FAMILIARISATION8 -
FRONT SEATS
Never travel with the head
restraints removed.

2. Armrest.

3. Seat back angle adjustment.

4. Forwards-backwards adjustment.

5. Storage drawer
(passenger).

 40

1. Head restraint height adjustment.

FAMILIARISATION10 -
STEERING WHEEL HEIGHT ADJUSTMENT

 When stationary, push the control A
forwards to unlock the steering wheel.

 Adjust the height of the steering
wheel.

 Lock it by pulling control A towards
you fully.
ELECTRIC WINDOWS

1. Driver's electric window.

2. Passenger's electric window.
EXTERIOR MIRRORS

 Move the manual control 3 in all
four directions to adjust.
Electric control for the
passenger's side mirror

 From the driver's seat, adjust in
all four directions by operating
the control 4 .
Manual mode:

 Press the switch. The window
stops as soon as the switch is re-
leased.
Automatic mode (driver):

 Press and hold the switch. One
touch completely opens or closes
the window.

 64
 65
 68

41SEATS-
FRONT SEATS

The adjustment is correct when
the upper edge of the head re-
straint is level with the top of the
head.
To remove the head restraint, place it
in the top position, press the tabs and
pull it upwards.
To put it back in position, locate the
stems of the restraint in the holes,
taking care to keep them in line with
the seat back.
No person or object must pre-
vent the seat from returning
to its initial position; return to
this position is necessary for
the seat to lock in place.
4. Forwards-backwards
adjustment
Lift the control and slide the seat for-
wards or backwards.
1. Head restraint height
adjustment
To raise or lower the restraint, slide it.
2. Armrests
These can be folded back. 3. Seat back angle adjustment
5. Storage drawer (version with
passenger air bag)
There is a storage drawer under the
front passenger seat.
To open it, lift it and pull. 6. Heated seats switch
Press the switch. The temperature is
controlled automatically.
Pressing the switch again stops op-
eration.

Note: the command for activation of
heating of the seat(s) remains mem-
orised for two minutes after the igni-
tion has been switched off.
7. Access to rear seats (version with one
sliding side door only)
Do not place heavy objects
in the drawers.
A. Turn the knob.

B. Pull the lever (version
with one sliding side
door only).
Never drive with the head re-
straints removed; they must
be in place and correctly ad-
justed. Lift the control to fold the seat back
and move the seat forwards.
On repositioning, the seat returns to
its initial position (driver's side).

SEATS52-
SEAT BELTS
Locking the seat belts
Pull the strap, then insert the end into
the buckle.
Check that the seat belt is fastened
correctly by pulling the strap.
Unfastening the seat belts
Press the button on the buckle.
Front seat belts
with pre-tensioner
Safety in the event of frontal impacts
has been improved by the introduc-
tion of pre-tensioning seat belts for
the front seats.
Depending on the seriousness of the
impact, the pre-tensioning system
instantly tightens the seat belts and
pulls them against the bodies of the
occupants.
The pre-tensioning seat belts are
armed when the ignition is on.
Seat belt height adjustment
To lower or raise: slide the control
downwards or upwards. Rear seat belts
(5 seat version)
The rear seats are fi tted with three
three-point inertia reel seat belts
(two-part rear seat, 1/3 - 2/3).
Rear seat belts
(7 seat version)

In row 2
The rear seats are fi tted with two
three-point inertia reel seat belts.

In row 3
The rear seats are fi tted with three
three-point inertia reel seat belts.

COMFORT AND SAFETY68 -
STEERING WHEEL HEIGHT ADJUSTMENT HEADLAMP ADJUSTMENT HORN
HAZARD WARNING LIGHTS
Press the button, the direction indicators
fl ash.
They can operate with the ignition off. Press one of the spokes or
the centre of the steering
wheel.

0 - With no load.

1 - With partial load.

2 - With average load.

3 - With maximum authorised load.

0 - 1 or 2 people in the front seats.

- - 3 people.

1 - 5 to 7 people.

2 - 5 to 7 people + maximum author-
ised load.

3 - Driver + maximum authorised
load.

Initial setting is position 0.
Depending on the load in your vehicle,
it is recommended that the headlamp
beam is adjusted.
When stationary, lower the handle to
unlock the steering wheel.
Adjust to the desired height and
lift the handle to lock the steering
wheel.