VIN Citroen C CROSSER 2009.5 1.G User Guide
Page 40 of 230
I
41
Setting the time
The digital clock is set a u t o m a t i c a l l y .
This mode enables the system to set
the local time automatically using the
signal from the RDS stations.
On the control panel, press button A
(SET) to access the "Settings"
menu.
On the touch screen, press button B
to access the " S y s t e m " menu.
The system settings screen is dis-
played.
" I n f o r m a t i o n " m e n u
On the control panel, press button
D
(INFO) to access the " I n f o " screen and
consult:
- " S u p p o r t i n f o " to display the soft-
ware and data versions,
- " V e h i c l e p o s i t i o n " to display the
GPS location of the vehicle,
- "Calendar" to make a note of
events, birthdays, etc.,
- " J o u r n e y " to display the average
speed, the consumption, the dis-
tances and the duration of driving,
- "Environment" to display the alti-
tude, the atmospheric pressure, the
exterior temperature (the ice symbol
is displayed if there is a risk of ice),
- "Air conditioning" to display the
information relating to the air condi-
tioning,
- " M o b i l e t e l e p h o n e " to enter a
number, delete a character, make
or receive a call. "Route" menu
On the control panel, press button E
(NAVI) to access the "Route Menu"
screen and select:
- "Detour" to make a detour through
a s p e c i fi e d r e g i o n ,
- "Route" to change the route,
- " D i s p l a y a r o u t e " to display a route
in different ways,
- "Delete a route" to delete a route,
- "Local POI" to search for the POIs
in the surrounding area.
Page 46 of 230
II
C O M F O R T
47
Manual operation
I t i s p o s s i b l e t o s e t o n e o r m o r e f u n c -
tions manually while leaving the other
f u n c t i o n s i n a u t o m a t i c m o d e .
Switching to manual mode may result
i n d i s c o m f o r t ( t e m p e r a t u r e , h u m i d i t y ,
o d o u r , c o n d e n s a t i o n ) a n d d o e s n o t
o f f e r o p t i m u m c o m f o r t . Temperature adjustment (3)
A i r fl o w a d j u s t m e n t ( 2 )
Turn the dial to the
right to increase the
a i r fl o w o r t o t h e l e f t
t o d e c r e a s e i t .
T u r n t h e t e m p e r a t u r e
control dial to the right
to increase the tem-
p e r a t u r e a n d t o t h e
l e f t t o d e c r e a s e i t .
Place the dial in the
p o s i t i o n r e q u i r e d
to direct the air to-
wards:
To avoid condensation and deterio-
ration of the quality of the air in the
p a s s e n g e r c o m p a r t m e n t , e n s u r e t h a t
a s u f fi c i e n t fl o w o f a i r i s m a i n t a i n e d .
the central and side vents,
the central and side vents and
the footwells,
the footwells,
the windscreen, the side win-
dows and the footwells,
the windscreen and the side
w i n d o w s .
T h e a i r d i s t r i b u t i o n c a n b e a d a p t e d b y
p l a c i n g t h e a d j u s t m e n t d i a l i n t h e i n t e r -
m e d i a t e p o s i t i o n s .
Air distribution adjustment (1)
Page 53 of 230
II!
C O M F O R T
53
REAR SEATS (ROW 2)
Seat back angle adjustment
P u l l t h e c o n t r o l a n d a d j u s t .
When the seat back is at the correct angle,
r e l e a s e t h e c o n t r o l .
Sit in the centre of the rear bench seat
to check that the two seats are at the
same level and that the angle of their
s e a t b a c k s i s t h e s a m e .
F o r w a r d s - b a c k w a r d s a d j u s t m e n t
Pull the control towards the outside and
a d j u s t .
When your seat is at the correct dis-
t a n c e , r e l e a s e t h e c o n t r o l .
To ensure that the seat is secured cor-
rectly, move it forwards and backwards
s l i g h t l y w i t h o u t u s i n g t h e c o n t r o l . When manoeuvring the seats,
e n s u r e t h a t n o p e r s o n o r o b j e c t
is in the vicinity of the moving
p a r t s t o a v o i d a n y r i s k o f i n j u r y o r
d a m a g e .
T o p r e v e n t t h e s e a t b a c k f r o m m o v -
i n g f o r w a r d s s h a r p l y a n d k n o c k i n g
y o u , p r e s s o n i t w i t h y o u r b a c k o r
p u s h i t w i t h y o u r h a n d w h i l e o p e r a t -
i n g t h e l e v e r .
The rear seats can be folded in two
p a r t s ( 1 / 3 - 2 / 3 ) .
Page 63 of 230
II
C O M F O R T
63
AREAS FOR TOLL CARDS/CAR
PARK TICKETS
The athermic windscreen has a non-re-
fl e c t i v e z o n e l o c a t e d a b o v e t h e b a s e o f
t h e i n t e r i o r m i r r o r .
I t i s i n t e n d e d f o r a f fi x i n g t o l l c a r d s a n d /
o r c a r p a r k t i c k e t s .
MAT
When removing the mat on the driver's
s i d e , m o v e b a c k t h e s e a t a s f a r a s p o s -
s i b l e a n d r e m o v e t h e fi x i n g s .
W h e n r e fi t t i n g , p o s i t i o n t h e m a t c o r r e c tly
o n t h e p i n a n d c l i p t h e fi x i n g s . C h e c k
t h a t t h e m a t i s s e c u r e d fi r m l y .
T o p r e v e n t a n y r i s k o f j a m m i n g u n d e r
t h e p e d a l s :
- o n l y u s e m a t s s u i t e d t o t h e fi x i n g s a l r e a d y p r e s e n t i n t h e v e h i c l e ; i t i s
i m p e r a t i v e t h a t t h e s e fi x i n g s a r e
u s e d .
- n e v e r fi t o n e m a t o n t o p o f a n o t h e r .
Page 72 of 230
II
!
C O M F O R T
72
Second installation position.
T h e l o a d s p a c e c o v e r c a n b e s e c u r e d
i n t w o d i f f e r e n t p o s i t i o n s B , so that the
r o w 2 s e a t b a c k s c a n b e t i l t e d .
1. R o l l u p t h e l o a d s p a c e c o v e r .
2. Move one of the slides C towards
the inside of the vehicle and insert
the tab D in the installation hole to
b e u s e d .
M o v e t h e o p p o s i t e s l i d e i n t h e s a m e w a y .
3. A f t e r c h a n g i n g t h e p o s i t i o n , c h e c k
t h a t t h e l o a d s p a c e c o v e r i s s e c u r e d
c o r r e c t l y . Removing the load space cover.
1. R o l l u p t h e l o a d s p a c e c o v e r .
2. Move one of the slides C towards the
i n s i d e o f t h e v e h i c l e a n d r a i s e i t .
R e l e a s e t h e o p p o s i t e s l i d e i n t h e s a m e w a y .
T o p u t t h e l o a d s p a c e c o v e r i n p l a c e , c a r r y
o u t t h e o p e r a t i o n s i n r e v e r s e o r d e r .
Load space cover
U n r o l l t h e l o a d s p a c e c o v e r a n d i n s t a l l i t
in the securing groove A .
T o s t o r e t h e l o a d s p a c e c o v e r , r e l e a s e
i t f r o m t h e s e c u r i n g g r o o v e , i t r o l l s u p t o
i t s i n i t i a l p o s i t i o n .
T a k e c a r e n o t t o p l a c e h e a v y
o b j e c t s o n t h e l o a d s p a c e c o v e r
w h e n i t i s u n f o l d e d .
T h e l o a d s p a c e c o v e r c a n b e s t o r e d
along the lower tailgate, unless audio
e q u i p m e n t i s p r e s e n t .
Page 75 of 230
III
A C C E S S
75
Starting the vehicle
Insert the key in the ignition switch.
Operate the starter by turning the
key to position 4 (START) .
When the engine turns over, release
the key. The ignition switch is placed
in position 3 (ON) automatically.
Switching the vehicle off
Park the vehicle.
While pressing the key, turn it
towards you to position 1 (LOCK) .
Remove the key from the ignition
switch. Changing the battery
Battery reference: CR1616/3 volts.
Unclip the casing using a coin at the
notch.
S l i d e t h e fl a t b a t t e r y o u t o f i t s h o u s i n g .
Slide the new battery into its hous-
ing observing the original direction.
Clip the casing.
Key in ignition
A buzzer sounds on opening the
driver's door, if the key has been left
in the ignition.
Page 79 of 230
III
A C C E S S
75
Starting the vehicle
Insert the key in the ignition switch.
Operate the starter by turning the
key to position 4 (START) .
When the engine turns over, release
the key. The ignition switch is placed
in position 3 (ON) automatically.
Switching the vehicle off
Park the vehicle.
While pressing the key, turn it
towards you to position 1 (LOCK) .
Remove the key from the ignition
switch. Changing the battery
Battery reference: CR1616/3 volts.
Unclip the casing using a coin at the
notch.
S l i d e t h e fl a t b a t t e r y o u t o f i t s h o u s i n g .
Slide the new battery into its hous-
ing observing the original direction.
Clip the casing.
Key in ignition
A buzzer sounds on opening the
driver's door, if the key has been left
in the ignition.
Page 81 of 230
III
!
A C C E S S
78
Disarming the passenger and rear
electric window switches Reinitialising the electric windows
Following reconnection of the battery or
after the safety auto-reverse has been
triggered three times in succession, you
must reinitialise the safety auto-reverse
function:
with the door closed, lower the window
completely then raise it again, it will rise
in steps of a few centimetres each time
the switch is pressed, repeat the op-
eration until the window is fully closed,
continue to press the switch for at least
one second after reaching the window
closed position.
Always remove the key from the
ignition when leaving the vehi-
cle, even for a short time.
In the event of contact during opera-
tion of the windows, you must reverse
the movement of the window. To do
this, press the switch concerned.
When the driver operates the passen-
ger electric window switches, he must
ensure that no one is preventing cor-
rect closing of the windows.
The driver must ensure that the pas-
sengers use the electric windows
correctly.
Be aware of children when operating
the windows.
For the safety of your children, press
switch 5 to prevent operation of the
passenger and rear electric windows
irrespective of their position.
When the button is pressed down,
disarming is active.
When the button is raised, disarming is
deactivated.
When the button is pressed down, you
can open or close all of the windows
using the switches on the driver's
door.
The safety auto-reverse function is
not active during these operations.
Page 85 of 230
III
81
"Tailgate open" warning
This warning light comes on on
the instrument panel display when
the tailgate is not closed correctly. LOWER TAILGATE
Opening
Push the handle C to the right and
tilt the tailgate D gently.
Closing
Raise the tailgate D , push it to close
it, then check that it is secured
correctly. Before opening the tailgate, ensure
that no one is within the radius of
opening.
For reasons of safety and correct
operation, do not drive with the
tailgate open.
If the battery is disconnected, the
tailgate cannot be opened.
Do not climb onto the lower tailgate
and do not subject it to heavy knocks,
it may be damaged.
Always close the lower tailgate and
check that it is secured correctly be-
fore closing the main tailgate.
When closing the lower tailgate,
ensure that no person or object is in
the proximity of the moving parts to
avoid any risk of injury or damage.
Do not open the lower tailgate when
a t o w b a r i s fi t t e d .
Maximum authorised weight on the
lower tailgate when open:
200 kg .
Tailgate release
This enables the tailgate to be unlocked
in the event of a central locking fault.
- Fold back the rear seats to gain
access to the tailgate release from
inside the boot.
- Remove the plastic cap from the opening A in the tailgate interior
pillar.
- Move the control B to the right to
unlock and open the tailgate.
Page 86 of 230
III
81
"Tailgate open" warning
This warning light comes on on
the instrument panel display when
the tailgate is not closed correctly. LOWER TAILGATE
Opening
Push the handle C to the right and
tilt the tailgate D gently.
Closing
Raise the tailgate D , push it to close
it, then check that it is secured
correctly. Before opening the tailgate, ensure
that no one is within the radius of
opening.
For reasons of safety and correct
operation, do not drive with the
tailgate open.
If the battery is disconnected, the
tailgate cannot be opened.
Do not climb onto the lower tailgate
and do not subject it to heavy knocks,
it may be damaged.
Always close the lower tailgate and
check that it is secured correctly be-
fore closing the main tailgate.
When closing the lower tailgate,
ensure that no person or object is in
the proximity of the moving parts to
avoid any risk of injury or damage.
Do not open the lower tailgate when
a t o w b a r i s fi t t e d .
Maximum authorised weight on the
lower tailgate when open:
200 kg .
Tailgate release
This enables the tailgate to be unlocked
in the event of a central locking fault.
- Fold back the rear seats to gain
access to the tailgate release from
inside the boot.
- Remove the plastic cap from the opening A in the tailgate interior
pillar.
- Move the control B to the right to
unlock and open the tailgate.