height adjustment Citroen C4 AIRCROSS 2012 1.G Owner's Manual

.
9
Familiarisation
Instruments and controls
Door mirror controls.
Electric window controls. 2.Bonnet release.
3.Fusebox.4. Manual headlamp height adjustment.
Side switch panel.
5. Side adjustable air vent.
6.Instrument panel.
7. Lighting and direction indicator controlstalk.8.Steering wheel adjustment control. 9.
Controls for Bluetooth system or telephone.10.Controls for Audio-CD and Audio-telematicsystems.11.
Driver's airbag.
Horn. 12. Cruise control switches.13.Parking brake.

12
Familiarisation
Sitting comfortably
Front seat
79
Manual adjustments
1.
Seat forwards-backwards adjustment.2.
Driver's seat cushion height adjustment. 3.Seat backrest angle adjustment.4.
Head restraint adjustment.
Electric adjustments
1.
Seat forwards-backwards adjustment.2.
Driver's seat cushion height and angleadjustment. 3.
Seat backrest angle adjustment.
80

.
13
Familiarisation
Sitting comfortably


Front armrest
82


Steering wheel adjustment
1.
Release.2.Adjust for height and reach.3.Lock. For
your comfor t, the front armrest is adjustable
longitudinally.
87 It also has two stora
ge spaces; these can be
fitted with accessory sockets.
101 As a safety precaution, these operations must only be carried outwhen stationary.

14
Familiarisation
Sitting comfortably
A.
Selection of the mirror to adjust. B.Adjusting the position of the mirror glass in
four directions. C.Folding / Unfolding.
85-86

Rear view mirror


Manual day/night model
1.Selection of the "day" position of the mirror.
2. Adjustment of the mirror.


Automatic day/night model
87 A
. Brightness detection in automatic day/night
mode. B. Adjustment of the mirror.
1.
Fastening the buckle.2.Height adjustment.


Front seat belts
150

79
3
Comfort








Front seats


Manual adjustments


Forwards-backwards
)Raise the control bar and slide the seatforwards or backwards.
When the seat is in the correct position, push
it for wards and backwards without raisin
g thecontrol bar to check that the it has latched.
Seat backrest angle
) Pull the control lever up to adjust the seatbackrest.
When the backrest is at the desired angle, release the control.

As a safety measure, seat adjustments should only be done when stationary.



Driver's seat height
)
Pull the control upwards to raise or push
it downwards to lower, as many times asnecessary, to obtain the position required.
Seat consistin
g of a seat cushion, a seat back and a head restraint which can all be adjusted to
adapt your position for ease of driving and comfor t.
When the backrest is at the correct angle, release the control lever. To ensure that thebackrest does not suddenly fold forwards and hurt you, restrain it with your back or your hand while operating the control.

80
Comfort











Front seats
Electric adjustments
Forwards-backwards
)Push the control forwards or rearwards toslide the seat.


Seat backrest angle
)
Tilt the control forwards or rearwards to
adjust the angle of the seat backrest.


Driver's seat cushion height and angle
)Pull or push the front part of the control
upwards or downwards to raise or lower thefront of the seat cushion. )Pull or push the rear par t of the control
upwards or downwards to raise or lower the
rear of the seat cushion. )Pull or push all of the control upwards or downwards to raise or lower the whole seatcushion

.


To avoid discharging the battery, carry outthese adjustments with the engine running.

81
3
Comfort
Additional adjustments
Head restraint height
The head restraint is fitted with a frame withnotches which prevents it from lowering; this is a safety device in case of impact.The adjustment is correct when the upper
edge of the head restraint is level with the
top of the head.

Never drive with the head restraintsremoved; they must be in place and adjusted correctly.

)To raise a head restraint, pull it upwards. )To lower the head restraint, press the lug Aand the head restraint at the same time.
)
To remove a head restraint, press the lug Aand pull the head restraint upwards. )
To put the head restraint back in place,engage the head restraint stems in the
openin
gs keeping them in line with the seat
back and press the lug A
at the same time.


Removing a head restraint

87
3
Comfort





Rear view mirror
Adjustable mirror providing a central rear ward view.
Equipped with an anti-dazzle system, which darkens the mirror glass and reduces the nuisance to
the driver caused by the sun, headlamps from other vehicles...


Manual day/night model

Ad
justment
)
Adjust the mirror so that the glass is directed correctly in the "day" position.


As a safety measure, the mirrors should be adjusted to reduce the "blind spot".


In order to ensure optimum visibilityduring your manoeuvres, the mirror lightens automatically when reverse gear is engaged.



Day / night position
)
Pull the lever to change to the "night" anti-dazzle position.)
Push the lever to change to the normal
"day" position.
Automatic day/night model
By means of a sensor, which measures the
light from the rear of the vehicle, this system automatically and progressively changes
between the day and night uses.








Steering wheel adjustment
)When stationary, lower the control lever to yrelease the steering wheel adjustment mechanism.)
Adjust the height and reach to suit your
driving position.) Pull the control lever to lock the steering
wheel adjustment mechanism.

As a safety precaution, these operations should only be carried out while the vehicle is stationary.

137
5
Visibility

To avoid causing a nuisance to other road
users, the height of the halogen headlamp
beams should be adjusted according to the load in the vehicle.0 1 or 2 people in the front seats. 1
5 passengers (including the driver). 2
5 passengers (including the driver) +
maximum authorised load.3
Driver + maximum authorised load.









Manual adjustment of
the headlamp beams Automatic headlamp adjustment
In cases of malfunction, this message
appears in the multifunction screen.
Do not touch the xenon bulbs. Contacta CITROËN dealer or a qualifiedworkshop.
On vehicles with xenon bulbs: when stationary, the system automatically correctsythe height of the beam, whatever the load of the
vehicle. The driver is then assured of having
optimum lighting and not causing a nuisance to other road users.

150
Safety
Seat belts
The front seat belts are fitted with a
pretensioning and force limiting system.
This system improves safety in the frontseats in the event of a front or side impact.
Depending on the severity of the impact, thepretensioning system instantly tightens the seat
belts a
gainst the body of the occupants.The pretensioning seat belts are active when
the ignition is on.
The force limiter reduces the pressure of the seat belt on the chest of the occupant, so
improving their protection.
Fastening
)
Pull the strap, then inser t the tongue in the buckle A.)
Check that the seat belt is fastened correctly by pulling the strap.


Unfastening
)
Press the red button on the buckle A.


Height adjustment
)To lower the attachment point, press thecontrol B
and slide the fixing Cdown.)To raise the attachment point, press thecontrol B
and slide the fixing Cup.