change time Citroen C4 CACTUS RHD 2015 1.G Owner's Manual

9
Optimise the use of your gearbox
With a manual gearbox, move off gently and change up without waiting. During   acceleration   change   up   early.
The
  gear   efficiency   indicator   invites   you   engage   the   most   suitable   gear:  
a

s   soon   as   the   indication   is   displayed   in   the   instrument   panel,   follow   it  
s

traight   away.
Control the use of your electrical
equipment
Before moving off, if the passenger compartment is too warm, ventilate it by   opening   the   windows   and   air   vents   before   using   the   air   conditioning.
Above
  30   mph   (50   km/h),   close   the   windows   and   leave   the   air   vents
 ope

n.
Remember
  to   make   use   of   equipment   that   can   help   keep   the
 t

emperature   in   the   passenger   compartment   down   (sunroof   and   window
 b

linds...).
To
  save   energy,   do   not   set   the   air   conditioning   at   too   low   a   temperature.
As
  soon   as   the   desired   temperature   has   been   reached,   limit   the   use   of
 t

he   air   conditioning,   except   if   regulation   is   automatic.
Switch
  off   the   demisting   and   defrosting   controls   as   soon   as   you   consider
 p

ossible.
Switch
  off   the   heated   seat   as   soon   as   possible.
Switch
  off   the   headlamps   and   foglamp   when   the   level   of   light   does   not  
r

equire   their   use.
Avoid
  running   the   engine   before   moving   off,   particularly   in   winter;   your  
v

ehicle   will   warm   up   much   faster   while   driving.
As
  a   passenger,   if   you   avoid   connecting   your   multimedia   devices  
(

film,   music,   video   game...),   you   will   contribute   towards   limiting   the  
c

onsumption   of   electrical   energy,   and   so   of   fuel.
Disconnect
  your   portable   devices   before   leaving   the   vehicle.
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
With
 
an
 
electronic
 
gearbox,
 
do
 
not
 
press
 
the
 
accelerator
 
pedal
 
heavily
 
o

r
 s

uddenly.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather t han   the   brake   pedal,   and   press   the   accelerator   progressively.   These  
p

ractices   contribute   towards   a   reduction   in   fuel   consumption   and   CO
2
emissions
 
and
 
also
 
help
 
reduce
 
the
 
background
 
traffic
 
noise.
If
 
your
 
vehicle
 
has
 
cruise
 
control,
 
make
 
use
 
of
 
the
 
system
 
at
 
speeds
 
a

bove
 
25
 
mph
 
(40
 
km/h)
 
when
 
the
 
traffic
 
is
 
flowing
 
well.
.
Eco-driving

36
Trip computer, a few definitions
Range
(miles or km)
T he   distance   which   can   still   be  
t

ravelled   with   the   fuel   remaining   in  
t

he   tank   (related   to   the   average   fuel  
c

onsumption   over   the   last   few   miles  
(

kilometres)
 t
ravelled).
This
  value   may   vary   following   a   change  
i

n
 
the   style   of   driving   or   the   relief,  
r

esulting   in   a   significant   change   in   the  
c

urrent   fuel   consumption.
When
 
the
  range   falls   below   20   miles   (30   km),  
d

ashes
 
are   displayed.   After   filling   with   at   least  
5

 
litres
 
of
 
fuel,   the   range   is   recalculated   and   is  
d

isplayed
  when   it   exceeds   60   miles   (100   km).
If
 
dashes   are   displayed   continuously  
w

hile   driving   in   place   of   the   digits,  
c

ontact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop. This
  function   is   only   displayed   from  
20
  mph   (30   km/h).
Current fuel
consumption
(mpg or l/100 km or km/l)
C alculated   over   the   last   few   seconds.
Average fuel consumption
(mpg or l/100 km or km/l)
C alculated   since   the   last   trip  
c

omputer
 re
set.
Distance travelled
(miles or km)
C alculated   since   the   last   trip  
c

omputer
 re
set.
Average speed
(mph or km/h)
C alculated   since   the   last   trip  
c

omputer
 re
set.
Stop & Start time
counter
(minutes / seconds or hours / minutes)
If
 
your
 
vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter
 
calculates   the   time   spent   in   STOP  
m

ode
 
during   a   journey.
It
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on.
Monitoring

53
Rear head restraints
They can be removed and are interchangeable side   to   side.
To
  remove   a   head   restraint:
F
 
P
ull   the   head   restraint   upwards   to   the   stop.
F
 
T
hen,   press   the   lug   A. Never
  drive   with   the   head   restraints  
r

emoved;   they   must   be   in   place   and  
a

djusted   to   the   normal   position   (up).
These
  have   one   position   for   use   (up)   and   a  
s

towed   position   (down).
To   refit   a   head   restraint:
F
 
E
ngage   the   head   restraint   rods   in   the  
a

pertures,  
k
eeping  
t
he  
h
ead  
r
estraint  
i
n  
l
ine  
w

ith   the   seat   backrest.
To
  lower   a   head   restraint:
F
 
P
ress   down   on   the   head   restraint   and   on  
l

ug   A   at   the   same   time.
3
Comfort

85
ETG electronic gearbox
N Neutral:  with   your   foot   on   the   brake,   press  t
his   control   to   put   the   gearbox   into   neutral  
a

nd   for   starting   the   engine.
D
 
D
rive:   press   this   control   to   engage   for ward  
d

rive   with   automatic   operation   of   the   gears.
R
 
R
everse:   with   your   foot   on   the   brake,   press  
t

his   control   to   engage   reverse.
Control panel
F Press  the   back   of   the   paddle   to  t
he right  of   the   steering   wheel   to  
ch

ange up .
Steering mounted controls
The steering mounted paddles do not a
llow   neutral   to   be   selected,   or   reverse  
g

ear   to   be   engaged   or   disengaged.
Five
 
or
 
six-speed
 
electronically
 
controlled
 
gearbox
 
which
 
offers   the   comfort   of   automatic   control   of   the   gears,   without   any   action   by   the   driver.
You
 
can
 
temporarily
 
take
 
control
 
of
 
gear
 
changes
 
at
 
any
 
time,   using   the   steering   mounted   control   paddles.
F  
P
ress   the   back   of   the   paddle   to  
t

he left
 
of   the   steering   wheel   to  
ch

ange down
.
Display in the instrument panel
F Place your foot on the brake
when   this   warning   lamp   flashes.
N
n
e

utral
D
 
and
 
1 2 3 4 5 / 6   
D
rive   (for ward   drive)   and   the  
g

ear
 enga
ged.
R

Reverse
5
Driving

87
Never select neutral (position N)   when  m
oving.
Forward drive
F Press control D . T
he   indicator   lamp   in   the   control   comes   on.
D
  and   the   gear   engaged   appear   in  
t

he   instrument   panel.
The
  gearbox   then   operates   in   auto-adaptive  
m

ode,   without   any   action   on   the   part   of   the  
d

river.   It   continuously   selects   the   most   suitable  
g

ear   taking   account   of:
-
 
o
ptimisation   of   fuel   consumption,
-
 
d
riving   style,
-
 
r
oad   conditions,
-
 
v
ehicle   load.
For
  optimum   acceleration,   when  
ov

ertaking   another   vehicle   for   example,  
p

ress   the   accelerator   pedal   fully   down,  
b

eyond   the   point   of   resistance.
Temporary control of gear
changing
You can temporarily take over control of gear changes   using   the   steering   mounted   "+"  and "-"
control
  paddles:   if   the   engine   speed   allows,   the
 g

ear   change   is   carried   out.
This function allows you to anticipate certain
situations
 
s
uch  
a
s  
ov
ertaking  
a
nother  
v
ehicle  
o
r  
a

pproaching   a   bend.
After
  a   few   moments   without   any   action   on   the  
p

addles,   the   gearbox   resumes   control   of   gear  
c

hanging
 a
utomatically. To
  engage   reverse,   the   vehicle   must   be  
i

mmobilised   with   your   foot   on   the   brake.
F
P
ress control R
.
 T
he   indicator   lamp   in   the   control   comes   on.
Reverse
There is an audible signal on enga
gement o f r everse.
If
 
reverse   gear   is   requested   when   moving,  
t

he

N
 
warning   lamp   flashes   and   the   gearbox  
g

oes
 
into   neutral   automatically.
To
 
engage   reverse,   stop   the   vehicle   then,   with  
y

our
 
foot   on   the   brake   pedal,   press   control   N,
then R .
Do
 
not
 
press
 
the
 
brake
 
and
 
accelerator
 
p

edals
 
at
 
the
 
same
 
time:
 
this
 
could
 
c

ause
 
very
 
rapid
 
wear
 
of
 
the
 
clutch.
5
Driving

92
A fault with the system is signalled in the " Driving assistance "
  menu  
(

primary   page)   of   the   touch   screen  
t

ablet.
Operating fault
In the event of a fault with the system, the   symbol   in   the button   changes   to   alert m

ode   and   the   indicator   lamp   flashes   for   a
 f

ew   moments   then   stays   on   continuously.
If you press this button to reactivate the
system,  the   indicator   lamp   flashes   again   for   a  
f

ew   moments   and   then   stays   on   continuously.
The
 
Stop
 
&
 
Start
 
system
 
can
 
be
 
deactivated
 
in
 
t

he
 
touch
 
screen
 
tablet.
Deactivation
If the system has been deactivated in STOP m ode,   the   engine   restarts   immediately.
When
  driving   on   a   flooded   road,   it   is  
r

ecommended   that   the   Stop   &   Start  
f

unction   be   deactivated   and   that   you  
d

rive   very   slowly. The
  system   can   be   reactivated   in   the   touch  
s

creen
 t
ablet.
Reactivation
The system is reactivated automatically e
very   time   the   engine   is   started   by  
t

he driver.
F

P

ress on " Stop & Star t ".
F

Sel

ect the " Driving assistance "
menu.
The
 
indicator
 
lamp
 
in
 
this
 
button
 
comes
 
on
 
c

ontinuously. Pressing
  this  
b
utton   again   reactivates  
t

he   Stop   &   Start   system.   The  
i

ndicator   lamp   in   the   button   goes   off.
Have   it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
In
  the   event   of   a   fault   in   STOP   mode,   the   vehicle
 m

ay   stall.
All
  of   the   instrument   panel   warning   lamps   come   on.
Depending
  on   version,   an   alert  
m

essage   may   also   be   displayed,   asking  
y

ou   to   change   to   neutral   (control   on   N)
 
a

nd   put   your   foot   on   the   brake   pedal.
You
  must   switch   off   the   ignition,   then  
s

tart   the   engine   again.
driving

98
Flashing of the dashes indicates a fault with the cruise   control.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Operating fault Switching off
F Turn wheel 1 to the "0" p osition. T
he   display   of   information   related   to   the  
c

ruise   control   disappears. When
  the   cruise   control   is   switched   on,  b
e   careful   if   you   maintain   the   pressure  o
n   one   of   the   programmed   speed  
c

hanging   buttons:   this   may   result   in   a  
v

ery   rapid   change   in   the   speed   of   your  
v

ehicle.
do n

ot use the cruise control on
slippery
  roads   or   in   heavy   traffic.
On
  a   steep   descent,   the   cruise   control  
w

ill not be able to prevent the vehicle
from
  exceeding   the   programmed   speed.
On
  steep   climbs   or   when   towing,   the  
p

rogrammed   speed   may   not   be   reached  
o

r   maintained.
The
  use   of   mats   not   approved   by  
C

ITROËN   may   inter fere   with   the  
o

peration   of   the   cruise   control.
To
  avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   secured  
c

o r r e c t l y,
-
 
n
ever   fit   one   mat   on   top   of   another.
It
 
is
 
possible
 
to
 
exceed
 
the
 
programmed
 
speed
 
t

emporarily
 
by
 
pressing
 
the
 
accelerator
 
pedal.
To
 
return
 
to
 
the
 
programmed
 
speed,
 
simply
 
r

elease
 
the
 
accelerator
 
pedal
 
until
 
the
 
p

rogrammed
 
cruise
 
speed
 
is
 
reached
 
again.
Exceeding the programmed
speed
Once switched on, you can pause the cruise c ontrol   at   any   time   by   pressing   button   4:   the  
s

creen   confirms   the   pause.
Pause
If the programmed speed is exceeded, the   displayed   speed   flashes.
Once
  the   speed   of   the   vehicle   returns  
t

o   the   programmed   speed   setting,   the  
d

isplay   becomes   steady   again.
The cruise control is paused
 m

anually
 o

r   by   pressing   the   brake   or   clutch   pedal  
o

r   if   the   ESP   system   is   invoked   for  
s

afety   reasons.
Driving

103
Park Assist
This system provides active assistance with parking, detecting a parking space then controlling the steering to park in the space.
I t   controls   the   steering   while   the   driver   manages   the   accelerator,   brakes,   gears   and   clutch   (manual   gearbox).   During   phases   of   entry   into   and   exit   from  
a

  parking   space,   the   system   provides   visual   and   audible   information   to   the   driver   in   order   to   make   the   manoeuvre   safe.   It   may   be   necessary   to   move  
f

or wards   and   backwards   more   than   once.
The
  Park   Assist   system   cannot   in   any  
c

ircumstances   replace   the   need   for  
v

igilance   on   the   part   of   the   driver.
The
  driver   must   remain   in   control   of  
t

heir   vehicle   ensuring   that   the   space  
r

emains   clear   during   the   manoeuvre.
In
  some   circumstances,   the   sensors  
m

ay   not   detect   small   obstacles   located  
i

n   their   blind   spots. Changing
  tyre   sizes   (out-size   tyres,  
w

inter   tyres,   ...)   can   inter fere   with  
t

he   correct   operation   of   the   parking  
a

ssistance   system.
During
  a   manoeuvre   the   steering   wheel  
t

urns   quickly:   do   not   hold   the   steering  
w

heel,   do   not   place   your   hand   between  
t

he   spokes   of   the   steering   wheel   and  
t

ake   care   with   loose   and   bulky   clothing,  
s

carves,   handbags...   There   is   a   risk   of  
in

jury. For
  entry   into   a   parking   space   (parallel  
p

arking)   the   system   does   not   detect  
s

paces   which   are   clearly   much   smaller  
o

r   larger   than   the   size   of   the   vehicle.
This
  "parking   assistance"   system  
i

s   activated   automatically   during  
m

anoeuvres;   it   is   therefore   possible  
t

hat   a   symbol   comes   on   in   the   screen,  
a

ccompanied   by   an   audible   signal,  
w

ithout   affecting   the   manoeuvre.The
  selection   of   the   type   of   manoeuvre  
(

entering   or   exiting   a   parallel   parking  
s

pace)   prevents   a   change   to   STOP  
m

ode   of   Stop   &   Start.
In
  STOP   mode,   this   selection   restarts  
t

he
 eng
ine.
The
  driver   can   take   control   at   any   time   by   gripping   the   steering   wheel.
The
 
s
ystem  
p
rovides  
a
ssistance  
i
n  
e
ntering  
a
nd  
e

xiting
 a par
king
 spa
ce
 w
hen
 par
allel
 par
king.
5
D

126
Under-inflation detection
The system monitors the pressures in the four t
yres,   once   the   vehicle   is   moving.
It
  compares   the   information   given   by   the   four  
w

heel   speed   sensors   with   reference values,
which must be reinitialised ever y time the
tyre pressures are adjusted or a wheel
changed .
The
  system   triggers   an   alert   as   soon   as   it  
d

etects   a   drop   in   the   inflation   pressure   of   one  
o

r   more   tyres. The
  under-inflation   detection   system  
d

oes   not   replace   the   need   for   vigilance  
o

n   the   part   of   the   driver.
This
  system   does   not   avoid   the   need   to  
c

heck   the   tyre   pressures   (including   the  
s

pare   wheel)   every   month   as   well   as  
b

efore   a   long   journey.
Driving
  with   under-inflated   tyres   impairs  
r

oad   holding,   extends   braking   distances  
a

nd   causes   premature   tyre   wear,  
p

articularly   under   arduous   condition  
(

high   loading,   high   speed,   long   journey).
System
  which   automatically   checks   the   pressures   of   the   tyres   while   driving.
The   inflation   pressures   defined   for  
y

our   vehicle   can   be   found   on   the   tyre  
p

ressure   label.
See
  the   "Identification   markings"  
s

ection.
Tyre
  pressures   should   be   checked  
w

hen   the   tyres   are   "cold"   (vehicle  
s

topped   for   1   hour   or   after   a   journey   of  
l

ess   than   6   miles   (10   km)   at   moderate  
s

peeds).
Other wise
  (when   hot),   add   0.3   bar   to  
t

he   pressures   shown   on   the   label.
Driving
  with   under-inflated   tyres  
i

ncreases   fuel   consumption.
Safety

184
Daytime running lamps /
S idelamps (LEDs)
For the replacement of the light-emitting d
iodes   (LEDs),   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop. F
 D isconnect   the   bulb   connector.
F
 
R
emove   the   bulb   and   change   it.
Dipped beam headlamps
F Remove  the   protective   cover   by   pulling   the  t
ab.
F
 
T
ake   the   connector   and   bulb   holder,   then  
l

ift   the   assembly   upwards   to   unclip   it.
F
 
R
emove   the   assembly   of   connector   and  
b

ulb   holder. To
  reassemble,   carry   out   these   operations   in  
r

everse   order,   positioning the alignment lug
at the top .
Practical information