reset Citroen C4 CACTUS RHD 2015 1.G Owner's Manual

Page 26 of 326

24
Service indicator
System which informs the driver when the next   service   is   due,   in   accordance   with   the  
ma

nufacturer's
 ser
vicing
 s
chedule.
More than 1 800 miles (3 000 km)
remain before the next service is due
When the ignition is switched on, no service information   appears   in   the   screen.
Between 600 miles (1 000 km)
and 1 800 miles (3 000 km) remain
before the next service is due
For 5 seconds after the ignition is switched on, the s
panner s ymbolising t he ser vice o perations c omes o

n.   The   distance   recorder   display   line   indicates   the
 d

istance   remaining   before   the   next   service   is   due.
Example:
 

1   700   miles   (2   800   km)   remain   before
 t

he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,   the
 s

creen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he spanner goes off ;
  the   distance   recorder  
r

esumes   its   normal   operation.   The   screen   then  
i

ndicates   the   total   distance.
Indicators
The point at which the next service is due is calculated   from   the   last   indicator   zero   reset,  
d

epending   on   the   distance   travelled   and   the  
t

ime   elapsed   since   the   last   service.
For
b
l
ueH
di
d
i
esel versions, the
degree
  of   deterioration   of   the   engine   oil  
i

s   also   taken   into   account   (depending  
o

n   the   country   of   sale).
Monitoring

Page 28 of 326

26
Service indicator zero reset
After each service, the service indicator must be   reset   to   zero.
If
  you   have   carried   out   the   service   on   your  
v

ehicle
 y
ourself:
F
 
s
witch   off   the   ignition,
F
 
p
ress   and   hold   the   button   on   the   end   of   the  
l

ighting   control   stalk,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F
 
w
hen   the   display   indicates   "=0", release
the
  button;   the   spanner   disappears. Following
  this   operation,   if   you   wish   to  
d

isconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   taken   into   account.
Retrieving the service
information
You can access the service information at any time   in   the   touch   screen   tablet.
F

Sel
ect the "Driving assistance "
menu.
F
 
I
n   the   secondary   page,   select  
"D

iagnostic".
The
  servicing   information   is   displayed   in  
t

he screen.
Monitoring

Page 37 of 326

35
Trip computer
System that gives you information on the journey in progress (range, fuel consumption…).
Information display in the touch screen tablet
F Select the "Driving assistance "
menu. -
 
T
he   current   fuel   consumption   tab  
w

ith:
●  
t
he   range,
●  
t
he   current   fuel   consumption,
●  
t
he   Stop   &   Start   time   counter.
-  
T
he   trip   "1"
 
tab   with:
●  
t
he   average   fuel   consumption,
●  
t
he   distance   travelled.
●  t he   average   speed,  
 f or   the   first   trip.
-
 
T
he   trip   "2"
 
tab   with:

 
t
he   average   fuel   consumption,

 
t
he   distance   travelled.

 
t
he   average   speed,  
 
f

or   the   second   trip.
Trip reset
F When  the   desired   trip   is   displayed,   press  t
he Reset  button   or   on   the   end   of   the   wiper  
c

ontrol   stalk   until   zeros   appear.
Tr i p s "1"
 

and   "2"
 a
re
 i
ndependent.
For
  example,   trip   "1"
 
can   be   used   for   daily  
f

igures,   and   trip   "2"
 
for   monthly   figures.
The
 
information
 
is
 
accessible
 
in
 
the
 
the
 
touch
 
screen
 
tablet.
For
 
a
 
temporary
 
display
 
in
 
a
 
new
 
w

indow,
 
press
 
the
 
end
 
of
 
the
 
wiper
 
stalk
 
f

or
 
access
 
to
 
the
 
information
 
and
 
cycle
 
t

hrough
 
the
 
different
 
tabs.
The
 
trip
 
computer
 
information
 
is
 
displayed
 
in
 
t

he
 
primary
 
page
 
of
 
the
 
menu.
F
 
P

ress
 
one
 
of
 
the
 
buttons
 
to
 
display
 
the
 
de

sired
 t

ab.
1
Monitoring

Page 38 of 326

36
Trip computer, a few definitions
Range
(miles or km)
T he   distance   which   can   still   be  
t

ravelled   with   the   fuel   remaining   in  
t

he   tank   (related   to   the   average   fuel  
c

onsumption   over   the   last   few   miles  
(

kilometres)
 t
ravelled).
This
  value   may   vary   following   a   change  
i

n
 
the   style   of   driving   or   the   relief,  
r

esulting   in   a   significant   change   in   the  
c

urrent   fuel   consumption.
When
 
the
  range   falls   below   20   miles   (30   km),  
d

ashes
 
are   displayed.   After   filling   with   at   least  
5

 
litres
 
of
 
fuel,   the   range   is   recalculated   and   is  
d

isplayed
  when   it   exceeds   60   miles   (100   km).
If
 
dashes   are   displayed   continuously  
w

hile   driving   in   place   of   the   digits,  
c

ontact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop. This
  function   is   only   displayed   from  
20
  mph   (30   km/h).
Current fuel
consumption
(mpg or l/100 km or km/l)
C alculated   over   the   last   few   seconds.
Average fuel consumption
(mpg or l/100 km or km/l)
C alculated   since   the   last   trip  
c

omputer
 re
set.
Distance travelled
(miles or km)
C alculated   since   the   last   trip  
c

omputer
 re
set.
Average speed
(mph or km/h)
C alculated   since   the   last   trip  
c

omputer
 re
set.
Stop & Start time
counter
(minutes / seconds or hours / minutes)
If
 
your
 
vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter
 
calculates   the   time   spent   in   STOP  
m

ode
 
during   a   journey.
It
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on.
Monitoring

Page 39 of 326

37
Total distance recorder
System which measures the total distance travelled   by   the   vehicle   during   its   life.
The
  total   distance   recorder   is   displayed  
c

ontinuously   in   the   instrument   panel,   as   soon  
a

s   the   driver's   door   is   opened,   as   well   as   when  
t

he   vehicle   is   locked   or   unlocked.
To
  conform   to   legislation   in   the  
c

ountry   you   are   crossing,   change   the  
u

nits   of   distance   (miles   or   km)   in   the  
"C

onfiguration "
  menu   of   the   touch  
s

creen
 t
ablet.
This
  operation   must   be   carried   out   with  
t

he   vehicle   stationary. System
  which   measures   a   distance   travelled  (
daily,   for   example)   since   it   was   reset   to   zero   by  
t

he
 d
river.
This function is accessible from the trip
computer in the touch screen tablet.
Trip distance recorder
F Select the " Driving assistance "
menu.
F

S
elect the tab for trip " 1"
or trip " 2".
F
 
T

o
 
reset   the   trip   recorder   to   zero,   press  
t

he " Reset "
  button   or   the   end   of   the   wiper  
c

ontrol   stalk   until   zeros   appear.
Distance recorders
1
Monitoring

Page 92 of 326

90
Stop & Start
Operation
Going into engine STOP mode
The "ECO"  warning   lamp   comes   on i
n   the   instrument   panel   and   the   engine g

oes   into   standby   automatically:
-
 
w

ith a manual gearbox , when stationary,
in
 
neutral,   and   you   release   the   clutch  
ped

al.
-
 
w

ith an electronic gearbox , when
stationary
  or   at   speeds   below   5   mph  
(

8 km/h)   (depending   on   version),   in   neutral  
(

control   on   N)
  or   when   you   press   the   brake  
ped

al. Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   button.
For
  your   comfort,   during   parking  
m

anoeuvres,   STOP   mode   is   not  
a

vailable   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
STOP
  mode   does   not   affect   the   the  
v

ehicle's   systems,   such   as   for   example,  
b

raking,   power   steering...
Special cases: STOP mode not
available
STOP mode is not invoked principally when:
-  t he   vehicle   is   on   a   steep   slope   (rising   or  
f

alling),
-
 
t
he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   by   the  
d

river,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning  
l

amp   flashes   for   a   few   seconds   then  
g

oes off.
This operation is perfectly normal.
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
temporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
stops
 
in
 
the
 
traffic   (red   lights,   traffic   jams,  
or
 
other...).
 
The engine
 
restarts
 
automatically
 
-
 
START
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
off.
 
The
 
restart   takes   place   instantly,   quickly  
and
 
silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when  
stationary.
Stop & Start time counter
A cumulative time counter for periods i n   STOP   mode   during   a   journey.
It
 
is
 
displayed   in   the   trip   computer   (accessible  
v

ia the " Driving assistance "
  menu   of   the  
t

ouch
 
screen   tablet).
It resets to zero every time the ignition is switched on.
driving

Page 240 of 326

04
238
MEDIA
Level 1Level 2
List of FM stations
"Media"
Primary page
Preset

Page 241 of 326

239
Level 1
Level 2 Comments
Media List List of FM stations
Press on a radio station to select it.
Media
Source FM RadioSelect change of source
DAB Radio
AM Radio
Jukebox
USB
iPod
Bluetooth
AUX
Media
Preset
Press an empty location to Preset it.

Page 243 of 326

241
Level 1
Level 2 Level 3 Comments
Media
Secondary page Radio list Preset
Press a radio station to select it.
Update listUpdate the list of stations received.
FrequencyEnter the desired radio frequency.
ConfirmSave the settings.
Media
Secondary page Photos Page selection
Display the selected photo full screen.
RotateRotate the photo 90°.
Select allSelect all the photos in the list.
Press   again   to   deselect.
Slideshow Previous   photo.Display the photos in sequence, full screen.Pause / Play.
Next   photo.
Confirm
Save the settings.
Media
Secondary page
Manage Jukebox Sort by folder
Choose the selection mode.Sort by album
Select all
Magnifying glass
Create
  folder
Choose the handling mode.Rename
d
elete
Select all
Confirm
Save the options.
CopyCopy files to the Jukebox.

Page 246 of 326

04
Selecting a station
The exterior environment (hills, buildings, tunnel, car park, below ground...) may prevent reception, even in RDS station tracking mode. This  phenomenon   is   normal   in   the   propagation   of   radio   waves   and   is   in   no   way   indicative   of   a   fault   with   the   audio   system.
Select "List"
  in   the   primary   page.
or
Select "Radio list"   in   the   secondary   page.
Press on Media   to   display   the   primary   page.
or
Press on Media   to   display   the   primary   page  
then

  go   to   the   secondary   page.
Select   a   radio   station   from   the   list   offered.
If   necessary,   select   change   of   source.
Press Media   to   display   the   primary  
page

  then   select   "
Preset ".
Select "FM Radio" or "AM Radio".
OR
Select "Update list"   to   refresh   the   list.
RADIO
Select a preset radio station in the list.
244

Page:   1-10 11-20 next >