navigation system Citroen C4 DAG 2008 1.G Owner's Manual

3
02GENERAL OPERATIONFor a detailed global view of the menus available, refer to the
"Display low charts" section of this handbook.
Press the MODE button several times in succession t
o gain access to the following menus:
For maintenance of the display, the use of a soft, non-abrasive cloth
(spectacles cloth) is recommended, without any addi tional product.
RADIO/MUSIC MEDIA PLAYERS
PHONE
(If a conversation is in progress)
TRIP COMPUTER FULL SCREEN MAP
NAVIGATION
(If navigation is in progress)
SETUP:
system language, date and time, display,
vehicle parameters, units and system parameters TRAFFIC:

TMC information and messages

7
03
5
6
7
1
2
3
4
NAVIGATION - GUIDANCE
ROUTE OPTIONS
Select the ROUTE DYNAMICS
function.
This function provides access to the
TRAFFIC INDEPENDENT or SEMI-
DYNAMIC options.
Select the AVOIDANCE CRITERIA
function. This function provides
access to the AVOID options
(motorways, toll roads, ferries).
Turn the dial and select the
RECALCULATE function to take into
account the route options selected.
Press the dial to conirm.
Press the NAV button.
Press the NAV button again or select
the NAVIGATION MENU function and
press the dial to conirm.
Select the ROUTE TYPE function and
press the dial to conirm. This function
allows you to change the route type.
Select the ROUTE DYNAMICS
function.
Select the ROUTE OPTIONS function
and press the dial to conirm.
NAVIGATION MENU
ROUTE OPTIONS
ROUTE TYPE
ROUTE DYNAMICS
AVOIDANCE CRITERIA
RECALCULATE
The route selected by the system depends directly o
n the route options.
Changing these options may change the route complet ely.

8
5
6
7
1
2
3
4
ADDING A STOPOVEREnter a new address, for example.
Once the new address has been
entered, select OK and press the dial
to conirm.
Select RECALCULATE and press the
dial to conirm.
Press the NAV button.
Press the NAV button again or select
the NAVIGATION MENU function and
press the dial to conirm.
Select the ADD A STOPOVER
function (5 stopovers maximum) and
press the dial to conirm.
Select the STOPOVERS function and
press the dial to conirm.
NAVIGATION MENU
STOPOVERS
ADD A STOPOVER
ENTER AN ADDRESS
OK
The stopover must be completed or deleted in order
for the guidance
to continue to the next destination. Otherwise, the system will always
return you to the previous stopover.
Stopovers can be added to the route once the destin
ation has been selected.
RECALCULATE