buttons Citroen C4 DAG 2014.5 2.G User Guide

Page 73 of 340

71 
C4-2_en_Chap04_ouvertures_ed01-2014
Lost keys
Go to a  CITROËN  dealer  with  the  vehicle's  registration  document,  your  personal
  identification   documents   and   if   possible   the   key   code   label.
The
 
CITROËN
 
dealer
 
will
 
be
 
able
 
to
 
look
 
up
 
the
 
key
 
code
 
and
 
the
 
transpon
-
der
  code   required   to   order   a   new   key. Do
 
not
 
throw
 
the
 
remote
 
con
-
trol batteries away, they contain
metals  which  are  harmful  to  the  environment.
T
ake  
them
 
to
 
an
 
approved
 
col
-
lection
  point.
Remote control
The high frequency  remote  control  is  a  sensitive  system;  do  not  operate  it  while
 it  is  in  your  pocket  as  there  is  a  possibility  that  it  may  unlock  the  ve -
hicle,
  without   you   being   aware   of   it.
Do
 
not
 
repeatedly
 
press
 
the
 
buttons
 
of
 
your
 
remote
 
control
 
out
 
of
 
range
 
and
 
out

 
of
 
sight
 
of
 
your
 
vehicle.
 
Y
ou  
run
 
the
 
risk
 
of
 
stopping
 
it
 
from
 
working
 
and
 
the

  remote   control   would   have   to   be   reinitialised.
No
 
remote
 
control
 
can
 
operate
 
when
 
the
 
key
 
is
 
in
 
the
 
ignition
 
switch,
 
even
 
when

  the   ignition   is   switched   off,   except   for   reinitialisation.
Locking the vehicle
Driving with the  doors  locked  may  make  access  to  the  passenger  compart -
ment   by   the   emergency   services   more   difficult   in   an   emergency.
As
 
a
 
safety
 
precaution,
 
never
 
leave
 
children
 
alone
 
in
 
the
 
vehicle,
 
except
 
for
 
a

  very   short   period.
In
 
all
 
cases,
 
it
 
is
 
essential
 
to
 
remove
 
the
 
key
 
from
 
the
 
ignition
 
switch
 
when
 
leaving

  the   vehicle.
Anti-theft protection
Do not make  any  modifications  to  the  electronic  engine  immobiliser  system;  this
  could   cause   malfunctions.
When purchasing a second-hand vehicle
Have the pairing  of  all  of  the  keys  in  your  possession  checked  by  a  CITROËN
 dealer ,  to  ensure  that  only  your  keys  can  be  used  to  open  and  
start

  the   vehicle.
4
ACCESS

Page 167 of 340

99
165 
C4-2_en_Chap09_conduite_ed01-2014
When the cruise control is
switched on,  be  careful  if  you  
maintain

 
the
 
pressure
 
on
 
one
 
of
 
the

 
programmed
 
speed
 
chang
-
ing
 
buttons:
 
this
 
may
 
result
 
in
 
a
 
very

 
rapid
 
change
 
in
 
the
 
speed
 
of

  your   vehicle.
d

o not use the cruise control on
slippery
 
roads
 
or
 
in
 
heavy
 
traffic.
On

 
a
 
steep
 
descent,
 
the
 
cruise
 
control will not be able to prevent
the

 
vehicle
 
from
 
exceeding
 
the
 
programmed

  speed.
On
 
steep
 
climbs
 
or
 
when
 
towing,
 
the

 
programmed
 
speed
 
may
 
not
 
be

  reached   or   maintained.
To
 
avoid
 
any
 
risk
 
of
 
jamming
 
of
 
the

  pedals:
-
 
ensure
 
that
 
the
 
mat
 
is
 
posi
-
tioned
  correctly,
-
 
never
 
fit
 
one
 
mat
 
on
 
top
 
of
 
another

.
Programming
F Turn dial  1 to the "CRUISE" po-
sition:  the  cruise  control  mode  is  
selected

 
but
 
is
 
not
 
switched
 
on
 
(Pause).
F

 
Set
 
the
 
programmed
 
speed
 
by
 
ac
-
celerating
 
to
 
the
 
required
 
speed,
 
then press button

2 or 3  
(e.g.:
 
70 

mph  
(1
10  
km/h));
 
the
 
cruise
 
control

  system   is   activated   (ON).
Exceeding the programmed speed
Intentional or unintentional  exceeding  of  the  programmed  speed
  results   in   flashing   of   this   speed   in   the   screen.
Return
 
to
 
the
 
programmed
 
speed,
 
by
 
means
 
of
 
intentional
 
or

 
unintentional
 
deceleration
 
of
 
the
 
vehicle,
 
automatically
 
cancels

  the   flashing   of   the   speed.
Exiting cruise control mode
F Turn dial  1 to the "0"  position:  the  cruise  control  mode  is
  deselected.   It   disappears   from   the   screen.
F
 
Stop
 
the
 
cruise
 
control
 
system
 
by
 
pressing
 
button
 
4
:  
this

  is   confirmed   in   the   screen   (Pause).
Operating fault
In the
 event  of  a  cruise  control  malfunc -
tion,  the  speed  is  cleared  resulting  in  
flashing

  of   the   dashes.
Have
 
it
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or

  a   qualified   workshop.
You
 
can

 
then

 
change

 
the

 
programmed

 
speed

 
using

 
but

-
tons

2
 
and
 
3:
-
 
by

 
+
 
or
 
-
 
1
 
mph
 
(km/h)
 
=
 
short
 
press,
-
 
in

 
steps
 
of
 
+
 
or
 
-
 
5
 
mph
 
(km/h)
 
=
 
maintained
 
press.
If
 
storing

 
speeds

 
is

 
available

 
and

 
activated

 
on

 
your

 
vehi

-
cle,
 
the

 
programmed

 
speed

 
will

 
stop

 
at

 
the

 
closest

 
stored

 
speed;

 
refer
 
to
 
the
 
corresponding
 
section.
F
 
Switch

 
on

 
the

 
cruise

 
control

 
again

 
with

 
another

 
press

 
on button

4.
DRIVING

Page 273 of 340

07
271
C4-2_en_Chap13b_RT6_ed01-2014
Press the button on the numerical keypad  to   recall   a   preset   station.
Or
  press   then   turn   the   thumb   wheel   at  
the

  steering   mounted   controls.
Presetting a station
After selecting a station, press one of the  buttons   on   the   numerical   keypad   for  
2

  seconds   to   preset   the   current   station.
An
  audible   signal   confirms   that   the  
station

  has   been   preset. Press RADIO.
Activate / Deactivate RDS
RDS, if activated, allows you to continue listening to the same station
  by   automatic   retuning   to   alternative   frequencies.   However,  
in

  certain   conditions,   coverage   of   an   RDS   station   may   not   be  
assured

  throughout   the   entire   country   as   radio   stations   do   not  
cover

  100   %   of   the   territory.  
This
  explains   the   loss   of   reception   of  
the

  station   during   a   journey.
Select "Guidance options " then
confirm.
Activate
  or   deactivate   "RDS" then
confirm.
RADIO

Page 274 of 340

07
272
C4-2_en_Chap13b_RT6_ed01-2014
Display of options:
if   active   but   not   available,   the   display  
will

  be   greyed   out,
if
  active   and   available,   the   display   will  
be

  empty. Display
  the   name   and   number   of  
the

  multiplex   service   being   used.
Preset   stations,   buttons   1   to   6
Short   press:   select   the   preset   radio  
station.
Long

  press:   preset   a   radio   station.
Display   of   "Radiotext"   for   the  
current

  station.
d
isplay of the " dab " or " dab
(FM)"   band.
Display   of   the   name   of  
the

  current   station.
Represents   the   signal   strength  
for

  the   band   being   listened   to.
If   the   "DAB"   radio   station   being  
listened

  to   is   not   available   on  
"FM", the "

dab FM" option is
greyed
  out.Any
  thumbnail   broadcast   by   the  
station.
The

  "Video   mode"   allows   the  
display

  to   be   enlarged.
RADIO

Page 280 of 340

08
278
C4-2_en_Chap13b_RT6_ed01-2014
Audio streaming
Streaming allows audio files on your telephone to be played via the vehicle's  speakers.
Connect
  the   telephone:   see   "USING THE TELEPHONE ".
Select "Audio" or "All"
  profile.
If
  play   does   not   start   automatically,   it   may   be   necessary   to   start   the  
audio

  playback   from   the   telephone.
Control
  is   from   the   peripheral   device   or   by   using   the   audio   system  
buttons.
Once

  connected   in   streaming   mode,   the   telephone   is   considered   to   be  
a

  media   source.
It
  is   recommended   that   you   activate   "Repeat" on the b luetooth
peripheral.
MUSIC MEDIA PLAYERS
Connecting APPLE® players
Connect the apple® player to the USB port using a suitable cable (not supplied).
Play
 
starts
 
automatically.
Control
 
is
 
via
 
the
 
audio   system.
The
 
classifications
 
available   are   those   of   the   portable   device  
connected

 
(artists
 
/
  albums   /   genres   /   playlists   /   audiobooks   /  
podcasts).
The

 
default
 
classification   used   is   by   artist.  
T
o   modify   the   classification  
used,

 
return
 
to
 
the
 
first   level   of   the   menu   then   select   the   desired  
classification

 
(playlists   for   example)   and   confirm   to   go   down   through  
the

 
menu
 
to
 
the
 
desired   track.
The
 
"Shuffle
 
tracks"   mode   on   an   iPod
® corresponds to the "Random" mode
 
on
 
the
 
audio
 
system.
The
 
"Shuffle
 
albums"
 
mode
 
on
 
an
 
iPod
® corresponds to the "Random all"
 
on
 
the
 
audio
 
system.
"Shuffle
 
tracks"
 
is
 
restored
 
by
 
default
 
on   each   connection.
The
 
version
 
of
 
software
 
in
 
the
 
audio
 
system   may   not   be   compatible  
with

 
the
 
generation
 
of
 
your
 
Apple® player.

Page 302 of 340

04
C4-2_en_Chap13c_RD5_ed01-2014
AUDIO
300Display   options:
if   active   but   not   available,   the   display   will  
be

  struck   out.
Preset   stations,   buttons   1   to   6
Short   press:   select   the   preset   radio  
station.
Long

  press:   preset   a   radio   station.
Display   the   name   of   the   multiplex  
service

  being   used.
Represents   the   signal   strength   for  
the

  band   being   listened   to.If   the   "DAB"   station   being   listened  
to is not available on "FM", "

dab
FM"   is   struck   out.
Display   of   RadioText   (TXT)   for   the  
current

  radio   station.Display   the   name   of   the   current  
station.

Page 304 of 340

04
302
C4-2_en_Chap13c_RD5_ed01-2014
AUDIO
Audio CD
Insert 12 cm diameter circular compact discs only.
Some   anti-pirating   systems,   on   original   discs   or   CDs   copied   using   a  
personal

  recorder,   may   cause   faults   which   are   no   reflection   on   the  
quality

  of   the   original   player.
Without
  pressing   the   E j ECT button, insert a C d in the player, play
begins
  automatically.
To
  play   a   disc   which   has   already   been  
inserted,

  press   the   SOURCE or SRC
button
  several   times   in   succession   and  
select "

CD".
Press one of the buttons to select a
track
  on   the   CD.
Playing a CD
Press LIST  to   display   the   list   of   tracks  
on

  the   CD.
Press
  and   hold   one   of   the   buttons   for  
fast

  forward   or   backward.

Page 306 of 340

04
304
C4-2_en_Chap13c_RD5_ed01-2014
CD, USB
AUDIO
Playing a compilationInsert   an   MP3   compilation   in   the   CD   player   or  
connect

  a   memory   stick   to   the   USB   port,   directly   or  
via

  an   extension   lead.
The
  system   creates   playlists   (temporary   memory)   the   creation   time  
for

  which   can   take   from   a   few   seconds   to   several   minutes.
The
  playlists   are   updated   every   time   the   ignition   is   switched   off   or   a  
USB

  memory   stick   is   connected.
Play
  starts   automatically   after   a   period   which   depends   on   the  
capacity

  of   the   USB   memory   stick.
Use
  only   USB   memory   sticks   formatted   FAT32   (File  
Allocation
 
T

able). At
  a   first   connection,   the   order   suggested   is   by   folder.  
When

  connecting   again,   the   order   previously   chosen   is  
retained.T

o   play   a   disc   or   memory   stick  
which

  has   already   been   inserted,  
press

SOURCE or SRC   several   times   in  
succession

  and   select   "CD" or "USB". Press one of the buttons to select the
next
  or   previous   track.
Press one of the buttons to select the
next
  or   previous   folder   in   the   order  
chosen.
Press

  and   hold   one   of   the   buttons   for  
fast

  forwards   or   backwards.
Press LIST
 

to   display   the   menu   of  
folders

  in   the   compilation.

Page 314 of 340

05


312
C4-2_en_Chap13c_RD5_ed01-2014
USING THE TELEPHONE
To display the " TELEPHONE "   menu:
-  
Make along press on SOURCE or SRC.
- Or,   press   OK   to   display   the  contextual
  menu.   Select   "Call"
  and  
confirm.
-

 
Or
,   press   MENU, select
"Telephone"
  and   confirm.  
Select

"Call"   and   confirm.
Select "Dial"
  to   enter   a   number   and  
confirm. T

o   display   the   "
TELEPHONE"   menu:
-  Make   a   long   press   on  SRC/TEL .
-  Or ,   press   the   dial   to   display   the  contextual
  menu.   Select   "Call"
  and  
confirm.
-
 Or

,   press   MENU, select "Telephone"
and
  confirm.   Select   "Call"   and
 confirm.
Select

OK   and   confirm   to   start   the  
call. Select "

Calls list"   and   confirm.
Making a call - Dialling
Select numbers one at a time using the 7   and   8   buttons   and   confirm.
Making a call - Recently called numbers*
Select the number and confirm to start  the   call.
The
 
calls
 
list
 
includes   calls   sent   and   received   in   the   vehicle   using   the  
connected

 
telephone.
*
 
Depending
 
on
 
the
 
compatibility   of   the   telephone.
Correction
 
allows
 
numbers
 
to
 
be
 
deleted
 
one
 
at
 
a
 
time. It
 
is
 
possible
 
to   make   a   call   directly   from   the   telephone;   park   the  
vehicle

 
first
 
as   a   safety   measure.

Page 315 of 340

05


313
C4-2_en_Chap13c_RD5_ed01-2014
USING THE TELEPHONE
To display the "TELEPHONE "   menu:
-  
Make
  a   long   press   on  
SRC/TEL
.
-
 
Or
,   press   the   dial   to   display   the  
contextual

  menu.   Select   "Call"
  and  
confirm.
-
 Or

,   press   MENU, select "Telephone"
and
  confirm.   Select   "Call"   and
 confirm.
Select "

Directory"
  and   confirm. An
  incoming   call   is   announced   by   a   ring   and   a   superimposed   display  
in

  the   multifunction   screen.
Mobile
(depending
  on   the   information  
available

  in   the   contact   records   of  
the

  telephone   connected). "YES"
  to   accept   the   call   is   selected   by  
default.
Press

OK   to   accept   the   call.
Select "NO"
  and   confirm   to   reject   the  
call.
or
Press one of these buttons to accept
the

  call.
Making a call - From the directory of contacts
Select a contact then confirm.
Receiving a call
Select the number and confirm.A
 
long   press   on  
ESC
or on TEL,
SOURCE or SRC   also   rejects   an  
incoming

  call.
b
usiness
Home

Page:   < prev 1-10 11-20 21-30 next >