instrument panel Citroen C4 PICASSO 2015 2.G Owner's Guide

Page 124 of 420

122
Starting-switching off the engine with the electronic key
F Place  the   gear   selector   lever   at   N for
vehicles   with   an   electronic   gearbox,   P or N
for
  vehicles   with   an   automatic   gearbox   or  
n

eutral   with   a   manual   gearbox.
F
 
I
nsert   the   electronic   key   in   the   reader.
F
 
P
ress   the   brake   pedal   for   vehicles   with  
a

n   electronic   or   automatic   gearbox,   or  
f

ully   declutch   for   vehicles   with   a   manual  
g

earbox.
Starting the engine
For Diesel vehicles , in
temperatures   below   zero   the  
e

ngine
 
will   not   start   until   the   preheater  
w

arning
  lamp   has   gone   off.
If
 
this
 
warning   lamp   comes   on   after  
p

ressing   "START/STOP",   you   should  
h

old
 
the
  brake   or   clutch   pedal   down  
u

ntil
 
the
  warning   lamp   goes   off   and  
d

o
 
not
 
press   the   START/STOP   button  
ag

ain.
If
 
one
 
of
  the   starting   conditions   is   not
 m

et,
 
a
 
reminder   message   appears   in
 t

he
 
instrument   panel   screen.   In   some
 c

ircumstances,   it   is   necessary   to   turn
 t

he
 
steering   wheel   slightly   while   pressing
 t

he
 
"START/STOP"   button   to   assist
 u

nlocking   of   the   steering;   a   message
 w

arns
 
you   when   this   is   needed.
F
b
r

iefly press the "
START/STOP"
button.
 T

he
 
steering
 
column
 
unlocks
 
and
 
t

he
 
engine
 
starts
 
more
 
or
 
less
 
i

mmediately
 
(see
 
the
 
advice
 
for
 
D

iesel
 v

ersions).
Driving

Page 126 of 420

124
Starting-switching off the engine with the "Keyless Entry and 
S
tarting"   system
F Place   the   gear   selector   lever   at   N for
vehicles   with   an   electronic   gearbox,   P or N
with
  an   automatic   gearbox,   or   neutral   with  
a m

anual
 g
earbox.
F
 
W
ith   the   electronic   key   inside   the   vehicle  
(

it   is   not   necessary   to   put   it   in   the   reader),  
p

ress   the   brake   pedal   for   vehicles   with  
a

n   electronic   or   automatic   gearbox,   or  
f

ully   declutch   for   vehicles   with   a   manual  
g

earbox. For Diesel vehicles
, in
temperatures   below   zero   the  
e

ngine   will   not   start   until   the  
p

reheater   warning   lamp   has  
g

one   off.
If
  this   warning   lamp   comes   on  
a

fter   pressing   "START/STOP",  
y

ou   should   hold   the   brake   or  
c

lutch   pedal   down   until   the  
w

arning   lamp   goes   off   and   do  
n

ot   press   the   START/STOP  
bu

tton
 ag
ain.
Starting the engine
If one of the starting conditions is not met,   a   reminder   message   appears   in t

he   instrument   panel   screen.   In   some
 c

ircumstances,   it   is   necessary   to   turn
 t

he   steering   wheel   slightly   while   pressing
 t

he   "START/STOP"   button   to   assist
 u

nlocking   of   the   steering;   a   message
 w

arns   you   when   this   is   needed.
F
b
r
iefly press the "
START/STOP"
button.
 T
he   steering   column   unlocks  
a

nd   the   engine   starts   more   or  
l

ess   instantly   (see   the   advice   for  
D

iesel
 v
ersions).
The   presence   of   the   "Keyless   Entry   and  
S

tarting"   system   electronic   key   in   the  
r

ecognition   zone   is   essential.
For
  safety   reasons,   do   not   leave   this  
z

one   with   the   vehicle   running. If
  the   electronic   key   is   not   detected   in  
t

he   zone,   a   message   is   displayed.   Move  
t

he   electronic   key   into   the   zone   so   that  
t

he   engine   can   be   started.
Driving

Page 128 of 420

126
Electronic key not
recognised
If the electronic key is no longer in the recognition   zone   when   driving   or   when   you  
(

later)   request   switching   off   the   engine,   a  
m

essage   appears   in   the   instrument   panel.
F
 
P
ress   and   hold   the   "START/
ST
oP

" button for about
3 seconds
  if   you   want   to   force  
s

witching   off   the   engine   (note
that restar ting will not be
possible without the key ).
Emergency switch-off
In the event of an emergency only, t
he  e ngine  c an  b e  s witched  o f  w ithout  
c

onditions.   To   do   this,   press   and   hold  
t

he   "START/STOP"   button   for   about  
3

  seconds.
In
 
this
 
case   the   steering   column   locks   as   soon  
a

s
 
the
 
vehicle   stops.
Driving

Page 129 of 420

127
Switching the ignition on
( without
 s
tarting)
With the ignition on, the system goes i
nto   energy   economy   mode   when  
n

ecessary   to   maintain   the   state   of  
c

harge   of   the   battery.
With
 
the   electronic   key   in   the   reader   or   the  
K

eyless   Entry   and   Starting   key   inside   the  
v

ehicle,   pressing   the   "START/STOP"   button,  
w

ith no action on the pedals
, allows the
ignition   to   be   switched   on.
F  
P
ress   the   "START/STOP"   button,  
t

he   instrument   panel   comes   on  
b

ut   the   engine   does   not   start.
F
 
P

ress   the   button   again   to   switch   off   the  
i

gnition   and   so   allow   the   vehicle   to   be  
lo

cked.
Anti-theft protection
Electronic engine immobiliser
The keys contain an electronic chip which has a
  secret   code.   When   the   ignition   is   switched  
o

n,   this   code   must   be   recognised   in   order   for  
s

tarting   to   be   possible.
This
  electronic   engine   immobiliser   locks   the  
e

ngine   management   system   a   few   minutes  
a

fter   the   ignition   is   switched   off   and   prevents  
s

tarting   of   the   engine   by   anyone   who   does   not  
h

ave   the   key.
In
  the   event   of   a   malfunction,   you   are   informed  
b

y   a   message   in   the   instrument   panel   screen.
In
 
t
his  
c
ase,  
y
our  
v
ehicle  
d
oes  
n
ot  
s
tart;  
c
ontact  
a

  CITROËN   dealer   as   soon   as   possible.
4
Driving

Page 130 of 420

128
Electric parking brake
In the event of a battery failure, the
electric  parking   brake   no   longer   works.
As
  a   safety   measure,   if   the   parking  
b

rake   is   not   applied,   immobilise   the  
v

ehicle   by   engaging   a   gear   (with   a  
m

anual   gearbox)   or   placing   a   chock   at  
o

ne   of   the   wheels.
Contact
  a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Indicator lamp
This indicator lamp comes on in the instrument   panel   and   in   the   control  
l

ever   to   confirm   the   application   of   the  
par

king
 b
rake.
The
 
system
 
provides,
 
in
 
automatic
 
operation,
 
t

he
 
application
 
of
 
the
 
parking
 
brake
 
on
 
s

witching
 
off
 
the
 
engine
 
and
 
release
 
as
 
the
 
v

ehicle
 
moves
 
off.
The
 
driver
 
can
 
take
 
over
 
at
 
any
 
time
 
to
 
apply
 
o

r
 
release
 
the
 
parking
 
brake,
 
by
 
operating
 
the
 
c

ontrol
 
lever:
-
 
b

y
 
briefly
 
pulling the control lever to apply
the
 
brake,
-
 
b

y
 
briefly
 
pushing the control lever, while
pressing
 
the
 
foot
 
brake,
 
to
 
release.
Automatic
 
mode
 
is
 
activated
 
by
 
default.
The
 
technology
 
adopted
 
for
 
the
 
electric
 
p

arking
 
brake
 
does
 
not
 
allow
 
the
 
fitment
 
o

f
 
wheels
 
smaller
 
than
 
16
 
inches. It
 
goes
 
off
  to   confirm   the   release   of   the   parking  
b

rake.
The
 
indicator   lamp   in   the   control   lever   flashes  
d

uring
 
manual   application   or   release.
After
 
the
 
parking   brake   has   been   applied,   the  
s

imultaneous   flashing   of   the   two   indicator  
l

amps
 
in
 
the   instrument   panel   and   the   control  
l

ever
 
alerts   you   to   the   need   to   fully   secure   your  
v

ehicle
 
by
  engaging   a   gear   (with   a   manual  
o

r
 
electronic   gearbox)   or   by   placing   the   gear  
s

elector in position P   with   an   automatic  
g

earbox,
 
or   by   fitting   a   chock   to   one   of   the  
w

heels.
 
(E.g.:   parking   on   a   very   steep   slope   or  
o

n
 
a
 
slope   with   a   low   battery).
driving

Page 131 of 420

129
Label on door panel
Before leaving the vehicle, check that parking   brake   is   applied:   the   indicator  
l

amps   in   the   instrument   panel   and  
t

he   control   lever   must   be   on   fixed,   not  
f

lashing.
If
  the   parking   brake   is   not   applied,   there  
i

s   an   audible   signal   and   a   message   is  
d

isplayed   on   opening   the   driver's   door.
Never
  leave   a   child   alone   inside   the  
v

ehicle   with   the   ignition   on,   as   they  
c

ould   release   the   parking   brake.When
  towing,   parking   on   a   steep  s
lope, or if your vehicle is heavily
laden,
  turn   the   wheels   towards   the   kerb  
a

nd   engage   a   gear   (with   a   manual   or  
e

lectronic   gearbox)   or   place   the   gear  
s

elector in position P   with   an   automatic  
g

earbox.
For
  towing,   you   vehicle   is   approved   for  
p

arking   on   slopes   of   up   to   12%.
Manual operation
Application of of the parking brake is   confirmed   by   illumination   of  
t

he   brake   indicator   lamp   and   the  
P

 indicator   lamp   in   the   control   lever,  
a

ccompanied   by   the   display   of   the  
m

essage   "Parking   brake   applied".
Manual release
With the ignition on or the engine running, to release   the   parking   brake:
F
 
p
ress   the   brake   pedal,
F
 
w
hile   maintaining   pressure   on   the   brake  
p

edal,   briefly   push   the   control   lever.
The
  complete   release   of   the   parking   brake   is  
c

onfirmed   by   the   brake   indicator   lamp   and   the  
P

  indicator   lamp   in   the   control   lever   going   off,  
a

ccompanied   by   the   display   of   the   message  
"

Parking   brake   released".
If you push the control lever without
pressing
  the   brake   pedal,   the   parking  
b

rake   will   not   be   released   and   a  
m

essage   is   displayed.
Manual application
With the  vehicle  stationary:  briefly  pull  the  control  lever.
Confirmation of the instruction is signaled by f
lashing   of   the   indicator   lamp   in   the   control  
l

eve r.
4
Driving

Page 134 of 420

132
Emergency braking
In the event of a failure of the main service brake   or   in   an   exceptional   situation   (e.g.   driver  
t

aken   ill,   under   instruction,   etc)   a   continuous  
p

ull   on   the   control   lever   will   brake   the   vehicle.  
B

raking   takes   place   while   the   control   lever   is  
b

eing   pulled.   It   is   interrupted   if   the   control   lever  
i

s
 r
eleased.
The
  ABS   and   DSC   systems   provide   stability   of  
t

he   vehicle   during   emergency   braking.
If
  the   emergency   braking   malfunctions,   the  
m

essage   "Parking   brake   control   faulty"   will   be  
d

isplayed.
If
  a   failure   of   the   ABS   and   DSC   systems  
o

ccurs,   signalled   by   the   illumination   of   one  
o

r   both   warning   lamps   in   the   instrument  
p

anel,   then   stability   of   the   vehicle   is   no   longer  
g

uaranteed.
In
  this   event,   stability   must   be   assured   by   the  
d

river   by   repeating   alternate   "pull-release"  
a

ctions on the control lever until the vehicle is
immobilised. The
  emergency   braking   should   only   be  
u

sed   in   an   exceptional   situation.
Repeat
 
this
 
procedure
 
to
 
reactivate
 
automatic
 
ope

ration.
Reactivation
 
of
 
automatic
 
operation
 
is
 
c

onfirmed
 
by
 
the
 
indicator
 
lamp
 
in
 
the
 
i

nstrument
 
panel
 
going
 
off.
Deactivating automatic
operation
In some situations, such as very cold weather o r   towing   (caravan,   recovery),   it   may   be  
n

ecessary   to   deactivate   automatic   operation   of  
t

he   system.
F
 
S
tart   the   engine.
F
 
A
pply   the   parking   brake   with   the   control  
l

ever,   if   it   is   released.
F
 
T
ake   your   foot   off   the   brake   pedal.
F
 
P
ush   and   hold   the   control   lever   in   the  
r

elease   direction   for   at   least   10   seconds  
a

nd   no   more   than   15   seconds.
F
 
R
elease   the   control   lever.
F
 
P
ress   and   hold   the   brake   pedal.
F
 
P
ull   the   control   lever   in   the   apply   direction  
f

or   2   seconds.
Deactivation
  of   the   automatic   functions
 i

s   confirmed   by   illumination   of   this
 i

ndicator   lamp   in   the   instrument   panel.
F
 
R
elease   the   control   lever   and   the   brake  
ped

al. From
  this   point   the   parking   brake   can   only  b
e   applied   and   released   manually   using   the  
c

ontrol   lever.
Driving

Page 136 of 420

134
SituationsConsequences
Display
 
of
 
the
 
message
 
" Parking brake fault "
  and   of   the  
fo

llowing
 w

arning
 lam

ps: The
  Parking   Brake   is   faulty,   the   manual   and   automatic   functions   may   not   operate.
When stationary ,
  to   immobilise   your   vehicle:
-
 
P
ull   and   hold   the   control   lever   for   about   7   to   15   seconds,   until   the   warning   lamp  
c

omes   on   in   the   instrument   panel.
If
  this   procedure   does   not   work,   you   should   make   your   vehicle   safe:
-
 
P
ark   on   a   level   sur face.
-
 
E
ngage   a   gear   with   a   manual   or   electronic   gearbox,   or   place   the   gear   selector   in  
p

osition P   with   an   automatic   gearbox.
-
 
I
f   possible,   fit   a   wheel   chock.
Call
  on   a   CITROËN   dealer   or   a   qualified   workshop.
Display
 
of
 
the
 
message
 
" Parking brake fault "
  and   of   the  
fo

llowing
 w

arning
 lam

ps: -
 
T
he   parking   brake   does   not   have   its   full   per formance   to   securely   hold   the   vehicle  
i

n   all   situations.
You
  should   make   your   vehicle   safe:
-
 
P
ark   on   a   level   sur face.
-
 
E
ngage   a   gear   with   a   manual   or   electronic   gearbox,   or   place   the   gear   selector   in  
p

osition P   with   an   automatic   gearbox.
-
 
I
f   possible,   fit   a   wheel   chock.
Call
  on   a   CITROËN   dealer   or   a   qualified   workshop.
The
  flashing   of   the   P   warning   lamps   on   starting   the   vehicle   indicates   that   the   parking  
b

rake   is   not   correctly   applied.
As
  soon   as   possible,   stop   the   vehicle   and   try   to   completely   release   the   parking   brake,  
u

sing   the   control   lever,   with   your   foot   on   the   brake   pedal.
Display
 
of
 
the
 
message
 
" Battery fault "
  and   the   following  
w

arning
 lam

p: -
 
T
he   state   of   charge   of   the   battery   is   very   low   and   requires   immobilisation   of   the  
v

ehicle   in   a   safe   place:   engage   a   gear   with   a   manual   gearbox   or   fit   a   chock   to  
o

ne   of   the   wheels.
-
 
O
nce   the   battery   is   completely   discharged,   the   controls   do   not   operate:   to  
r

elease   the   parking   brake,   call   on   a   CITROËN   dealer   or   a   qualified   workshop.
Driving

Page 140 of 420

138
Displays in the instrument panel
N. neutral
R. R everse
M.

(
and gear engaged)
 M
anual
 m
ode.
AUTO or A.
 
A
utomated   mode. If the engine does not star t:
If N
  flashes   in   the   instrument   panel,  
a

ccompanied   by   an   audible   signal   and  
a

  message,   move   the   selector   lever   to  p
osition A then to position N
.
Moving off
F Select position N.
F  P ress   the   brake   pedal   down   fully.
F
 
S
tart   the   engine.
N
  appears   in   the   instrument   panel  
sc

reen. F
 S elect   automated   mode   (position   A
)   or  m
anual   mode   (position   M)   or   reverse  
(

position
 R).
F

 
R
elease   the   parking   brake   by   pulling   the  
c

ontrol   lever,   if   automatic   operation   has  
b

een
 d
eactivated.
F
 
P
rogressively   take   your   foot   off   the   brake  
ped

al.
F
 
I
f   the   parking   brake   is   released,   the   vehicle  
m

oves   off.
 I

f   the   parking   brake   is   applied   and   the  
a

utomatic   mode   is   activated,   accelerate  
p

rogressively.A or AUTO
 

and   1, 1 or R
  is   displayed  
i

n   the   instrument   panel.
If the Foot on brake
warning
  lamp   comes   on  
t

he   instrument   panel,  
a

ccompanied   by   an   audible   signal   and  
a

  message   "Foot   on   brake",   press   the  
b

rake   pedal   firmly. If
  the   brake   does   not   release  
a

utomatically,   check   that   the   front   doors  
a

re   correctly   closed.
Driving

Page 141 of 420

139
never select neutral N w hen d riving.
Automated mode
F Select position A.
AUTO or A
  and   the   gear   engaged   is  
d

isplayed   in   the   instrument   panel.
The
  gearbox   operates   in   auto-active   mode,  
w

ithout   any   action   on   the   part   of   the   driver.   It  
c

ontinuously   selects   the   most   suitable   gear   for:
-
 
o
ptimisation   of   fuel   consumption,
-
 
t
he   style   of   driving,
-
 
t
he   profile   of   the   road.
-
 
t
he   vehicle   load.
For
  optimum   acceleration,   for   example  
w

hen   overtaking   another   vehicle,   press  
t

he   accelerator   pedal   firmly   past   the  
p

oint   of   resistance.
Temporary control of gear
changing
F Select position M .
The   gears   engaged   are   displayed   in  
s

uccession   in   the   instrument   panel.
The
  gear   change   requests   are   only   acted   on   if  
t

he   engine   speed   permits.
It is not necessary to release the accelerator
during
  gear   changes.
When
  braking   or   slowing   down,   the   gearbox  
c

hanges   down   automatically   to   allow   the  
v

ehicle   to   accelerate   in   the   correct   gear.
On
  sharp   acceleration,   the   gearbox   will   not  
c

hange   up   unless   the   driver   acts   on   the  
s

teering   mounted   paddles.
Manual mode
You can change mode at any time by moving the   selector   lever   from   A to M or the other way
round.
ne

ver select neutral N  
w
hen
 d
riving.
You
 
can
 
temporarily
 
take
 
over
 
control
 
of
 
g

ear
 
changing
 
using
 
the
 
"+"
 

and
 
"-"
 

steering
 m
ounted
 
paddles.
 
If
 
the
 
engine
 
speed
 
allows,
 t
he
 
instruction
 
to
 
change
 
gear
 
is
 
acted
 
on.
This function allows you to anticipate certain
situations
 
such
 
as
 
overtaking
 
a
 
vehicle
 
or
 
the
 
a

pproach
 
to
 
a
 
corner.
After
 
a
 
few
 
moments
 
without
 
any
 
action
 
on
 
t

he
 
control
 
paddles,
 
the
 
gearbox
 
resumes
 
a

utomatic
 
control
 
of
 
the
 
gears.
4
driving

Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 61-70 ... 70 next >