window Citroen C4 RHD 2015 2.G User Guide

33
56 
FRONT DEMIST - DEFROST
These markings on  the  control  panel
 indicate  the  control  po -
sitions
 
for
 
rapid
 
demisting
 
or
 
defrosting

 
of
 
the
 
windscreen
 
and

  side   windows.
With manual air conditioning
F Put the  temperature,  air  flow  and distribution
 controls  to  the  dedicated marked

  position.
F
 
Put
 
the
 
air
 
intake
 
control
 
to
 
the
 
"Exterior

  air   intake"   position  
 
(indicator

  lamp   on   the   control   off).
F
 
Switch
 
on
 
the
 
air
 
conditioning
 
by pressing

 
the
 
"A/C"
button; the warn-
ing
  lamp   in   the   button   comes   on.
REAR SCREEN DEMIST - DEFROST
The control button  is  located  on
 the  air  conditioning  system  
control

  panel.
Switching on
The rear  screen  demisting/defrosting  can
 only  operate  when  the  engine  is  
running.
F

 
Press
 
this
 
button
 
to
 
demist/defrost
 
the

 
rear
 
screen
 
and
 
(depending
 
on
 
version)

 
the
 
door
 
mirrors.
 
The
 
indi
-
cator
 
lamp
 
associated
 
with
 
the
 
but
-
ton
  comes   on.
Switching off
The demisting/defrosting  switches  of f  automatically
 to  prevent  an  excessive  
consumption

  of   current.
F
 
It
 
is
 
possible
 
to
 
stop
 
the
 
demisting/de
-
frosting
 
operation
 
before
 
it
 
is
 
switched of

f  
automatically
 
by
 
pressing
 
the
 
button again.

 
The
 
indicator
 
lamp
 
associated with

  the   button   goes   off.
F
 
Switch
 
of
f  
the
 
demisting/de
-
frosting
 
of
 
the
 
rear
 
screen
 
and

 
door
 
mirrors
 
as
 
soon
 
as
 
appropriate, as lower current
consumption

 
results
 
in
 
re
-
duced
  fuel   consumption.
With digital dual-zone air
conditioning
Automatic visibility programme
F 
Select
 
this
 
programme
 
to
 
demist
 
or

 
defrost
 
the
 
windscreen
 
and
 
side
 
windows

  as   quickly   as   possible.
The
 
system
 
automatically
 
manages
 
the

 
air
 
conditioning,
 
air
 
flow
 
and
 
air
 
intake,

 
and
 
provides
 
optimum
 
distribu
-
tion
 
towards
 
the
 
windscreen
 
and
 
side
 

windows.
F


To stop  the  programme,  press  either  the "visibility" button again  or  "AUT O",
the  warning  lamp  on  the  button  goes of

f  
and
 
the
 
warning
 
lamp
 
on
 
the "AUT

O"
button comes on.
The system  starts  again  with  the  values  in
 use  before  it  was  overridden  by  the  
visibility

  programme.
With
 
Stop
 
&
 
Start,
 
when
 
dem
-
isting
 
has
 
been
 
activated,
 
the
 
ST

OP
 
mode   is   not   available.
With Stop & Start, when the
demisting,
 
air

 
conditioning

 
and

 
air

 
flow

 
functions

 
are

 
activated,

 
ST

OP
 

mode
 
is
 
not
 
available.
COMFORT

65 
REMOTE CONTROL KEY
System which permits  central  unlocking  or
 locking  of  the  vehicle  using  the  door  
lock

 
or
 
from
 
a
 
distance.
 
It
 
is
 
also
 
used
 
to

 
locate
 
and
 
start
 
the
 
vehicle,
 
as
 
well
 
as

  providing   protection   against   theft.
Unlocking the vehicle
Unfolding the key
F 
Press
  this   button   to   unfold   the   key.
F
 
Press
 
the
 
open
 
padlock
 
to

 
unlock
 
the
 
vehicle
 
com
-
pletely. F
 
Press
 
the
 
open
 
padlock
 
once

 
to
 
unlock
 
the
 
driver's
 
door

  only.
Selective unlocking using the
remote control
Complete unlocking using
the remote control F
 
Press
 
the
 
open
 
padlock
 
again
 
to
 
un
-
lock   the   other   doors   and   the   boot.
F
Maintain the press on the
open

 
padlock
 
until
 
the
 
de
-
sired  position  is  obtained.  The
 windows  stop  as  soon  as
  you   release   the   button.
Opening the windows using the
remote control
Unlocking using the key
F
 
T
urn  
the
 
key
 
forwards
 
in
 
the
 
driver's
 
door

 
lock
 
to
 
unlock
 
the
 
vehicle
 
com
-
pletely.
Programming the unlocking
The  
complete
 
or
 
selective
 
door
 
unlocking

 
parameter
 
is
 
set
 
via
 
the

 
vehicle
 
configuration
 
menu.The
 
direction
 
indicators
 
flash
 
for
 
a

  few   seconds.
The  
spotlamps
 
in
 
the
 
door
 
mir
-
rors   come   on.
Depending  
on
 
version,
 
the
 
door
 
mirrors

 
unfold,
 
the
 
welcome
 
lighting

 
comes
 
on,
 
the
 
alarm
 
is
 
deactivated.
Selective unlocking of the boot F

Press the central button
on

 
the
 
remote
 
control
 
to
 
unlock

 
the
 
boot.
 
The
 
doors
 
remain

  locked.
The  
complete
 
or
 
selective
 
boot
 
unlocking

 
parameter
 
is
 
set
 
via
 
the

 
vehicle
 
configuration
 
menu.
Programming the unlocking If
 
selective
 
unlocking
 
of
 
the
 
boot
 
is
 
de
-
activated,  
pressing
 
this
 
button
 
also
 
un
-
locks   the   doors.
Don't  forget  to  lock  the  boot  again
 by  pressing  the  closed  padlock
  button.
Selective
 
unlocking
 
of
 
the
 
boot
 
is
 
acti
-
vated
  by   default.
4
ACCESS

66 
Locking the vehicle
F Press the  closed  padlock  to  lock
  the   vehicle.
Normal locking using the remote
control
Normal locking using the key
F
 
T

urn
 
the
 
key
 
towards
 
the
 
rear
 
in
 
the
 
driver's

 
door
 
lock
 
to
 
lock
 
the
 
vehicle.
The

 
direction
 
indicators
 
flash
 
for
 
a
 
few seconds.
Depending

 
on
 
version,
 
the
 
door
 
mirrors
 
fold,

 
the
  alarm   is   activated.
If
 
one
 
of
 
the
 
doors
 
or
 
the
 
boot
 
is

 
still
 
open,
 
the
 
central
 
locking
 
does

  not   take   place.
However,
 
the
 
alarm
 
(if
 
present)
 
will

 
be
 
completely
 
activated
 
after
 
about

  45   seconds.
If
 
the
 
vehicle
 
is
 
unlocked
 
inad
-
vertently
 
and
 
with
 
no
 
action
 
on
 
the

 
doors
 
or
 
boot,
 
the
 
vehicle
 
will
 
lock

 
itself
 
again
 
automatically
 
af
-
ter
  about   30   seconds.
If
 
the
 
alarm
 
had
 
previously
 
been activated,

 
it
 
will
 
not
 
be
 
reactivated automatically

. The
 
folding
 
and
 
unfolding
 
of
 
the
 
door

 
mirrors
 
using
 
the
 
remote
 
control

 
can
 
be
 
deactivated
 
by
 
a
 
CITROËN

 
dealer
 
or
 
a
 
qualified
 workshop.
Closing the windows using the
remote controlF
 
Press
 
and
 
hold
 
down
 
the
 
closed

 
padlock
 
until
 
the
 
de
-
sired
 
position
 
is
 
obtained.
 
The

 
windows
 
stop
 
when
 
you

  release   the   button.
When
 
closing
 
the
 
windows
 
using
 
the

 
remote
 
control
 
you
 
must
 
en
-
sure
 
that
 
nothing
 
prevents
 
them
 
from

  closing   correctly.
If
 
you
 
want
 
to
 
leave
 
the
 
windows
 
partly

 
open,
 
you
 
must
 
deactivate
 
the

  volumetric   alarm   monitoring.
Deadlocking using the remote
control
Deadlocking using the key
F
 
T
urn  
the
 
key
 
to
 
the
 
rear
 
in
 
the
 
driv
-
er's
 
door
 
lock
 
to
 
lock
 
the
 
vehicle
 
completely

.
F
 
T
urn  
the
 
key
 
to
 
the
 
rear
 
again
 
within five

 
seconds
 
to
 
deadlock
 
the
 
vehicle.
Deadlocking

 
is
 
confirmed
 
by
 
fixed
 
light
-
ing
 
of
 
the
 
direction
 
indicators
 
for
 
ap
-
proximately
  two   seconds.
According
 
to
 
version,
 
the
 
door
 
mirrors
 
fold

  at   the   same   time.
In
 
low
 
light,
 
deadlocking
 
also
 
brings
 
on

 
the
 
guide-me-home
 
lighting
 
(see
 
"V

isibility"). Deadlocking
 
renders
 
the
 
exterior and

 
interior
 
door
 
controls
 
inopera
-
tive.
It  also  deactivates  the  central  locking
  control   button.
Therefore, never leave anyone
inside
 
the
 
vehicle
 
when
 
it
 
is
 
deadlocked.
F

 
Press
 
the
 
closed
 
padlock
 
to
 
lock

 
the
 
vehicle
 
completely
.
F
 
Press
 
the
 
closed
 
padlock
 
again
 
within

 
five
 
seconds
 
to
 
deadlock
 
the
 
vehicle.
4
ACCESS

71 * According  to   country.
ALARM*
System which protects  and  provides  a deterrent
 against  theft  and  break-ins.  It provides

 
the
 
following
 
types
 
of
 
monitoring.
-


exterior perimeter
The

 
system
 
checks
 
for
 
opening
 
of
 
the
 
vehicle.
The

 
alarm
 
is
 
triggered
 
if
 
anyone
 
tries
 
to
 
open

  a   door,   the   boot,   the   bonnet...
-

interior volumetric
The

 
system
 
checks
 
for
 
any
 
variation
 
in
 
the volume

  in   the   passenger   compartment.
The
 
alarm
 
is
 
triggered
 
if
 
anyone
 
breaks
 
a window

,  
enters
 
the
 
passenger
 
compart
-
ment
  or   moves   inside   the   vehicle.
-
tilt
The
 
system
 
checks
 
for
 
any
 
change
 
in
 
the

  attitude   of   the   vehicle.
The
 
alarm
 
is
 
triggered
 
if
 
the
 
vehicle
 
is
 
lifted,

  moved   or   knocked.
Self-protection function
The
 
system
 
checks
 
for
 
the
 
putting
 
out
 
of

  service   of   its   components.
The
 
alarm
 
is
 
triggered
 
if
 
the
 
battery
,  
the
 
central

 
control
 
or
 
the
 
siren
 
wiring
 
are
 
put

  out   of   service   or   damaged.
For
 
all
 
work
 
on
 
the
 
alarm
 
sys
-
tem,
 
contact
 
a
 
CITROËN
 
dealer
 
or

  a   qualified   workshop.
Locking the vehicle with full
alarm system
Activation
F 
Switch
 
of
f  
the
 
ignition
 
and
 
get
 
out
 
of
 
the

  vehicle.
F
 
Press
 
the
 
locking
 
button
 
on
 
the
 
re
-
mote
  control.
The
 
monitoring
 
system
 
is
 
active:
 
the
 
in
-
dicator
 
lamp
 
in
 
the
 
button
 
flashes
 
once
 
per

  second.
After
 
the
 
locking
 
button
 
on
 
the
 
remote
 
control

 
is
 
pressed,
 
the
 
exterior
 
perime
-
ter
 
monitoring
 
is
 
activated
 
after
 
a
 
delay
 
of

 
5
 
seconds
 
and
 
the
 
interior
 
volumetric
 
and

 
anti-tilt
 
monitoring
 
after
 
a
 
delay
 
of
 
45

  seconds. If
 
an
 
opening
 
(door
,  
boot...)
 
is not

 
closed
 
fully
,  
the
 
vehicle
 
is
 
not locked

 
but
 
the
 
exterior
 
perimeter monitoring

 
will
 
be
 
activated
 
af
-
ter  
a
 
delay
 
of
 
45
 
seconds
 
at
 
the same

 
time
 
as
 
the
 
interior
 
volu
-
metric   and   anti-tilt   monitoring.
Deactivation
F  
Press
 
the
 
unlocking
 
button
 
on
 
the
 
remote

  control.
The
 
alarm
 
system
 
is
 
deactivated:
 
the
 
indicator

  lamp   in   the   button   goes   off.
4
ACCESS

72 
Operating fault
When the ignition  is  switched  on,  fixed illumination
 of  the  indicator  lamp  in  the button

  indicates   a   fault   with   the   system.
Have
 
it
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or

  a   qualified   workshop.
Locking the vehicle with exterior
perimeter monitoring only
Deactivate the  interior  volumetric  and  anti-tilt
 monitoring  to  avoid  unwanted  
triggering

 
of
 
the
 
alarm
 
in
 
certain
 
cases
 
such

  as:
-
 
leaving
  a   pet   in   the   vehicle,
-
 
leaving
  a   window   partially   open,
-
 
washing
  your   vehicle,
-
 
changing
  a   wheel,
-
 
having
  your   vehicle   towed,
-
 
transport
  by   sea.
Deactivation of the interior
volumetric and anti-tilt monitoring
F
 
Switch
  off   the   ignition.
F
 
Within
 
ten
 
seconds,
 
press
 
the
 
but
-
ton
 
until
 
the
 
indicator
 
lamp
 
is
 
on
 
continuously

.
F
 
Get
  out   of   the   vehicle.
F
 
Press
 
the
 
locking
 
button
 
on
 
the
 
re
-
mote
  control   immediately. The
 
exterior
 
perimeter
 
monitoring
 
alone
 
is

 
activated:
 
the
 
indicator
 
lamp
 
in
 
the
 button
  flashes   once   per   second.
To  
be
 
ef
fective,  
this
 
deactivation
 
must

 
be
 
carried
 
out
 
each
 
time
 
the

  ignition   is   switched   off.
Reactivation of the interior
volumetric and anti-tilt monitoring
F
 
Press
 
the
 
unlocking
 
button
 
on
 
the
 
remote

 
control
 
to
 
deactivate
 
the
 
ex
-
terior
  perimeter   monitoring.
F
 
Press
 
the
 
locking
 
button
 
on
 
the
 
re
-
mote
 
control
 
to
 
activate
 
all
 
the
 
moni
-
toring
  functions.
The
 
indicator
 
lamp
 
in
 
the
 
button
 
again
 
flashes

  once   per   second.
Triggering of the alarm
This is indicated  by  sounding  of  the  si -
ren  and  flashing  of  the  direction  indica -
tors
  for   thirty   seconds.
The
 
monitoring
 
functions
 
remain
 
ac
-
tive
 
until
 
the
 
alarm
 
has
 
been
 
triggered
 
eleven

  times   in   succession.
When
 
the
 
vehicle
 
is
 
unlocked
 
using
 
the
 
remote

 
control,
 
rapid
 
flashing
 
of
 
the
 
in
-
dicator
 
lamp
 
in
 
the
 
button
 
informs
 
you
 
that

 
the
 
alarm
 
was
 
triggered
 
during
 
your
 
absence.

 
When
 
the
 
ignition
 
is
 
switched
 
on,

  this   flashing   stops   immediately.
Failure of the remote control
To deactivate the monitoring functions:
F  
unlock
 
the
 
vehicle
 
using
 
the
 
key
 
in
 
the

  driver's   door   lock,
F
 
open
 
the
 
door;
 
the
 
alarm
 
is
 
triggered,
F

 
switch
 
on
 
the
 
ignition;
 
the
 
alarm stops;

 
the
 
indicator
 
lamp
 
in
 
the
 
button goes

  off.
Locking the vehicle without
activating the alarm
F Lock or  deadlock  the  vehicle  using  the
  key   in   the   driver's   door   lock.
4
ACCESS

75 
ELECTRIC WINDOWS
Fitted with a  safety  anti-pinch  system  and
 a  deactivation  system  for  the  rear  
controls.
1.


Driver's electric window
.
2.

Passenger's electric window
.
3.

Rear right electric window
.
4.

Rear left electric window
.
5.

Deactivation of the rear electric
window controls. The

 
electric
 
window
 
controls
 
remain

 
operational
 
for
 
approxi
-
mately
 
45
 
seconds
 
after
 
the
 
i

 
gnition
 
is
 
switched
 
of
f  
or
 
until
 
the

 
vehicle
 
is
 
locked
 
after
 
a
 
door
 
is

  opened.
If
 
one
 
of
 
the
 
passenger
 
windows
 
cannot

 
be
 
operated
 
from
 
the
 
driver's

 
door
 
control
 
panel,
 
carry
 
out

 
the
 
operation
 
from
 
the
 
con
-
trol
 
panel
 
of
 
the
 
passenger
 
door
 
concerned,

  and   vice   versa.After
 
approximately
 
ten
 
con
-
secutive  complete  opening/clos -
ing  movements  of  the  window ,  a  
protection

 
function
 
is
 
activated
 
which

 
only
 
authorises
 
closing
 
of
 
the

 
window
 
to
 
prevent
 
damage
 
to

  the   electric   window   motor.
Once the window  is  closed,  the  con -
trols  will  become  available  again  af -
ter
  approximately   40   minutes.
If the window  cannot  be  closed  (for example,
 in  the  presence  of  ice), once

  the   window   has   lowered:
F
 
press
 
and
 
hold
 
the
 
control
 
until

  the   window   opens   fully,
F
 
then
 
pull
 
the
 
control
 
immedi
-
ately
 
and
 
hold
 
it
 
until
 
the
 
win
-
dow
  closes,
F
 
continue
 
to
 
hold
 
the
 
control for

 
approximately
 
one
 
second after

  the   window   has   closed.
The safety anti-pinch func-
tion is not operational during
these operations.
There
 
are
 
two
 
options:
-
 
manual mode
F

 
Press

 
or

 
pull

 
the

 
control

 
gently

.
 
The window

 
stops

 
when

 
the

 
control

 
is released.
-

 
automatic mode
F

 
Press

 
or

 
pull

 
the

 
control

 
firmly

.
 
The

 
window

 
opens

 
or

 
closes

 
fully

 
when

 
the
 
control
 
is
 
released.
F
 
Pressing

 
the

 
control

 
again

 
stops

 
the

 
movement
 
of
 
the
 
window.
Safety anti-pinch
When 
the
 
window
 
rises
 
and
 
meets
 
an
 
obstacle,

 
it
 
stops
 
and
 
partially
 
lowers
 
again.
One-touch electric windows
4
ACCESS

76 
Reinitialisation
After 
reconnecting
 
the
 
battery
 
or
 
a
 
fault,
 
you

 
must
 
be
 
reinitialise
 
the
 
operation
 
of
 
the

 
electric
 
windows.
 
For
 
each
 
of
 
the
 
control

 
switches
 
on
 
the
 
driver's
 
side
 
control

  panel:
F
 
pull
 
the
 
control
 
until
 
the
 
window
 
stops,
F

 
release
 
the
 
control
 
and
 
pull
 
it
 
again
 
until

  the   window   closes   fully,
F
 
continue
 
to
 
hold
 
the
 
control
 
for
 
ap
-
proximately
 
one
 
second
 
after
 
the
 
window

  has   closed,
F

press the control to lower the win
-
dow
 
automatically
 
to
 
the
 
low
 
posi
-
tion,
F
 
when
 
the
 
window
 
has
 
reached
 
the
 
low

 
position,
 
press
 
the
 
control
 
again
 
for

  approximately   one   second.
The safety anti-pinch function is not
operational during these operations. F
 
For
 
the
 
safety
 
of
 
your
 
children,
 
press
 
control 5

 
to
 
deactivate
 
the
 
rear
 
elec
-
tric
 
window
 
controls
 
regardless
 
of
 
their

  position.
Indicator
 
lamp
 
on,
 
the
 
rear
 
controls
 
are
 
deactivated.
Indicator

 
lamp
 
of
f,  
the
 
rear
 
controls
 
are
 
activated.
Deactivation of the rear electric
window controlsAlways remove the  key  from  the  ignition
 when  leaving  the  vehi -
cle,
  even   for   a   short   time.
If
 
an
 
obstacle
 
is
 
encountered
 
during

 
operation
 
of
 
the
 
electric
 
windows,

 
you
 
must
 
reverse
 
the
 
movement

 
of
 
the
 
window
.  
T
o  
do

 
this,
 
press
 
the
 
control
 
con
-
cerned.
When
 
the
 
driver
 
operates
 
the
 
controls

 
for
 
the
 
passengers'
 
electric

 
windows,
 
they
 
must
 
en
-
sure
 
that
 
nothing
 
is
 
preventing
 
the

  windows   closing   correctly.
The
 
driver
 
must
 
ensure
 
that
 
the
 
passengers

 
use
 
the
 
electric
 
win
-
dows
  correctly.
Be
 
aware
 
of
 
children
 
when
 
oper
-
ating
  the   windows.
4
ACCESS

77
115 
For optimum installation  of  the  "for -
ward-facing"  child  seat,  ensure  that  
the

 
back
 
of
 
the
 
child
 
seat
 
is
 
as
 
close
 
as

 
possible
 
to
 
the
 
backrest
 
of
 
the
 
ve
-
hicle's
  seat,   in   contact   if   possible.
You
 
mst
 
remove
 
the
 
head
 
restraint
 
before

 
installin
g  
a
 
child
 
seat
 
with
 
backrest

  to   a   passenger   seat.
Ensure
 
that
 
the
 
head
 
restraint
 
is
 
stored

 
or
 
attached
 
securely
 
to
 
pre
-
vent
 
it
 
from
 
being
 
thrown
 
around
 
the
 
vehicle

 
in
 
the
 
event
 
of
 
sharp
 
brak
-
ing.
 
Refit
 
the
 
head
 
restraint
 
when
 
the
 
child

  seat   is   removed.
ADVICE ON CHILD SEATS
Installing a booster seat
Children at the frontThe incorrect  installation  of  a  child  seat
 in  a  vehicle  compromises  the  
child's

 
protection
 
in
 
the
 
event
 
of
 
an
 
accident.
Ensure that there is no seat belt or
seat

 
belt
 
buckle
 
under
 
the
 
child
 
seat,
 
as

  this   could   destabilise   it.
Remember
 
to
 
fasten
 
the
 
seat
 
belts
 
or
 
the

 
child
 
seat
 
harnesses
 
keeping
 
the
 
slack

 
relative
 
to
 
the
 
child's
 
body
 
to
 
a
 
minimum,

  even   for   short   journeys.
When
 
installin
g  
a
 
child
 
seat
 
using
 
the
 
seat belt, ensure that the seat belt is
tightened

 
correctly
 
on
 
the
 
child
 
seat
 
and that it  secures  the  child  seat  firmly on the seat  of  your  vehicle.  If  your  passenger
 seat  is  adjustable,  move  
it

  forwards   if   necessary.
The
 
legislation
 
on
 
carrying
 
children
 
on the

 
front
 
passenger
 
seat
 
is
 
specific
 
to each

 
country
.  
Refer
 
to
 
the
 
legislation in

  force   in   your   country.
Deactivate
 
the
 
passenger
 
airbag
 
when

 
a
 
"rearward-facing"
 
child
 
seat
 
is

  installed   on   the   front   seat.
Otherwise,
 
the
 
child
 
would
 
risk
 
being
 
seriously

 
injured
 
or
 
kille
d  
if
 
the
 
airbag
 
were

  to   inflate.The
 
chest
 
part
 
of
 
the
 
seat
 
belt
 
must
 
be

 
positioned
 
on
 
the
 
child's
 
shoulder
 
without

  touching   the   neck.
Ensure that the lap part of the seat
belt  
passes
 
correctly
 
over
 
the
 
child's
 
thighs.
CITROËN

 
recommends
 
the
 
use
 
of
 
a

 
booster
 
seat
 
which
 
has
 
a
 
back,
 
fit
-
ted  
with
 
a
 
seat
 
belt
 
guide
 
at
 
shoulder
 
level.
As

  a   safety   precaution,   do   not   leave:
-  a  child  or  children  alone  and  un -
supervised   in   a   vehicle,
-  a  child  or  an  animal  in  a  vehicle  
which

 
is
 
exposed
 
to
 
the
 
sun,
 
with
 
the

  windows   closed,
-
 
the
 
keys
 
within
 
reach
 
of
 
children
 
inside

  the   vehicle.
At
 
rear
 
seating
 
positions,
 
always
 
leave

 
sufficient
 
space
 
between
 
the
 
front

  seat   and:
-
 
a
  "rearward   facing"   child   seat,
-
 
the
 
child's
 
feet
 
for
 
a
 
child
 
seat
 
fit
-
ted
  "forward   facing".
To
 
do
 
this,
 
move
 
the
 
front
 
seat
 
for
-
wards
 
and,
 
if
 
necessary
,  
move
 
its
 
backrest

  into   the   upright   position. To
 
prevent
 
accidental
 
opening
 
of
 
the
 
doors

 
and
 
rear
 
windows,
 
use
 
the
 
"Child

  lock".
Take
 
care
 
not
 
to
 
open
 
the
 
rear
 
win
-
dows
  by   more   than   one   third.
To
 
protect
 
young
 
children
 
from
 
the
 
rays

 
of
 
the
 
sun,
 
fit
 
side
 
blinds
 
on
 
the
 
rear

  windows.
CHILD SAFETY

77
116 
ELECTRIC CHILD LOCK
Remote control system  to  prevent  opening
 of  the  rear  doors  using  their  in -
terior
 
controls
 
and
 
use
 
of
 
the
 
rear
 
elec
-
tric
  windows   .
The
 
control
 
is
 
located
 
on
 
the
 
dash
-
board,
  driver's   side.
F
 
Press
  this   button.
The
 
indicator
 
lamp
 
in
 
the
 
button
 
comes
 
on,

 
accompanied
 
by
 
a
 
message
 
in
 
the
 
screen.
This

 
indicator
 
lamp
 
remains
 
on
 
until
 
the
 
child

  lock   is   switched   off.
Switching on
Switching off
F
 
Press
  this   button   again.
The
 
indicator
 
lamp
 
on
 
button
 
A
 
goes
 
of

f,  
accompanied
 
by
 
a
 
message
 
in
 
the
 
screen.
This

 
indicator
 
lamp
 
remains
 
on
 
while
 
child

  lock   is   switched   on.This
 
system
 
is
 
independent
 
and
 
in

 
no
 
circumstances
 
does
 
it
 
take
 
the

 
place
 
of
 
the
 
central
 
locking
 
control.
Check

 
the
 
status
 
of
 
the
 
child
 
lock
 
each

 
time
 
you
 
switch
 
on
 
the
 
igni
-
tion.
Always
 
remove
 
the
 
key
 
from
 
the
 
ignition

 
when
 
leaving
 
the
 
vehi
-
cle,
  even   for   a   short   time.
In
 
the
 
event
 
of
 
a
 
serious
 
impact,
 
the

 
electric
 
child
 
lock
 
is
 
switched
 
of

f  
automatically
 
to
 
permit
 
the
 
exit

  of   the   rear   passengers.
Any
 
other
 
status
 
of
 
the
 
indica
-
tor
 
lamp
 
indicates
 
a
 
fault
 
with
 
the

 
electric
 
child
 
lock.
 
Have
 
it
 
checked

 
by
 
a
 
CITROËN
 
dealer
 
or

  a   qualified   workshop.
CHILD SAFETY

88
126 
Lateral airbags
System which protects  the  driver  and  front
 passenger  in  the  event  of  a  seri -
ous
 
side
 
impact
 
in
 
order
 
to
 
limit
 
the
 
risk
 
of

 
injury
 
to
 
the
 
chest,
 
between
 
the
 
hip
 
and

  the   shoulder.
Each
 
lateral
 
airbag
 
is
 
fitted
 
in
 
the
 
seat
 
backrest

  frame,   door   side.
Deployment
A
 lateral

 
airbag
 
is
 
deployed
 
unilaterally
 
in the

 
event
 
of
 
a
 
serious
 
side
 
impact
 
applied to

 
all
 
or
 
part
 
of
 
the
 
side
 
impact
 
zone B,
perpendicular

 
to
 
the
 
longitudinal
 
cen
-
treline
 
of
 
the
 
vehicle
 
on
 
a
 
horizontal
 
plane and

 
directed
 
from
 
the
 
outside
 
towards
 
the inside

  of   the   vehicle.
The
 
lateral
 
airbag
 
inflates
 
between
 
the
 
hip

 
and
 
shoulder
 
of
 
the
 
front
 
occupant
 
of

 
the
 
vehicle
 
and
 
the
 
corresponding
 
door

  trim   panel. A.
 
Front
  impact   zone.
B.
 
Side
  impact   zone.
Impact detection zones
Curtain airbags
System which
 contributes  towards  im -
proving  the  protection  of  the  driver  and  
passengers

 
(with
 
the
 
exception
 
of
 
the
 
rear

 
centre
 
passenger)
 
in
 
the
 
event
 
of
 
a

 
serious
 
side
 
impact
 
in
 
order
 
to
 
limit
 
the

 
risk
 
of
 
injury
 
to
 
the
 
side
 
of
 
the
 
head.
Each

 
curtain
 
airbag
 
is
 
built
 
into
 
the
 
pil
-
lars
 
and
 
the
 
upper
 
passenger
 
compart
-
ment
  area.
Deployment
The
 
curtain
 
airbag
 
is
 
deployed
 
at
 
the
 
same

 
time
 
as
 
the
 
corresponding
 
lateral
 
airbag

 
in
 
the
 
event
 
of
 
a
 
serious
 
side
 
impact

 
applied
 
to
 
all
 
or
 
part
 
of
 
the
 
side
 
impact

 
zone
 
B
,  
perpendicular
 
to
 
the
 
longitudinal

 
centreline
 
of
 
the
 
vehicle
 
on
 
a

 
horizontal
 
plane
 
and
 
directed
 
from
 
the

 
outside
 
towards
 
the
 
inside
 
of
 
the
 
vehicle.
The

 
curtain
 
airbag
 
inflates
 
between
 
the
 
front

 
or
 
rear
 
occupant
 
of
 
the
 
vehicle
 
and
 
the

  windows.
SAFETY