key DODGE CHARGER SRT 2015 7.G Uconnect 8.4A

•While the vehicle is in motion it is possible to enable or
disable the WiFi Hotspot. Simply press to check or
uncheck the box to the right of the App.
•For your own safety, it is not possible to use some of
the touchscreen features while the vehicle is in motion.
The key pad is not available while the vehicle is in
motion.
CAUTION!
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
related to the use of the Uconnect® features and
applications in this vehicle. Only use Uconnect®
when it is safe to do so. Failure to do so may result in
an accident involving serious injury or death.
Tips And Shortcuts
•Give your WiFi Hotspot a unique name by pressing
“Hotspot Name” within the WiFi Hotspot App.
•To view a list of connected devices, press “View
Connected Devices” within the WiFi Hotspot App
when the hot spot is turned on.
•If WiFi Hotspot Off is shown, then WiFi is not acti-
vated (must beOnfor connectivity to be enabled.)
•If Enable WiFi Hotspot is unchecked, then WiFi is not
activated.
•To quickly enable or disable WiFi Hotspot, press to
check or uncheck the box to the right of the App.
78 ALL ABOUT Uconnect® ACCESS

10.Can I use Text Messaging if the “messaging” button
doesn’t turn white?Only MAP compatible phones
will work with Text Messaging. If your phone is
compatible, the “messaging” light will turn white,
after the phone is Bluetooth® connected, and you
will then be able to do hands free Text Messaging.
The system will respond with “Sorry, I didn’t under-
stand you” if you push the steering wheel “Phone”
button and say a voice command for Text Messaging,
when the button isn’t active (“white”).
Remote Door Lock/Unlock
Lock Or Unlock Your Vehicle From Virtually Anywhere
Using Your Computer Or Smartphone App.
Description
The Remote Door Lock/Unlock feature provides you the
ability to lock or unlock the door on your vehicle,
without the keys and from virtually any distance. You
can send a request to your vehicle in one of three ways:
•Using the Uconnect® Access App from a compatible
smartphone
•From the Mopar® Owner Connect website
(moparownerconnect.com)
•Contacting Uconnect® Care
If you want, you can set up notifications for your account
to receive an email or text (SMS) message every time a
command is sent to lock or unlock your doors.
How It Works
Uconnect® Access App:
1. Download the Uconnect® Access App to a compatible
smartphone and login using your username and pass-
word.
2. To lock the doors, push the button with the closed lock
icon; to unlock the driver ’s door push the button with
the open lock icon.
2
ALL ABOUT Uconnect® ACCESS 103

3. A pop-up screen will appear asking for your
Uconnect® Security PIN (this is the same 4- digit code
established when your registered your Uconnect®
Access system). Enter the Uconnect® Security PIN on
the keypad and press “OK.”
4. The Uconnect® Access App will confirm if your
command was sent (or not). Press “OK” to close the
pop-up screen.
5. It will take a little while for the command to go
through to your vehicle. The time it takes depends on
a number of technical conditions.
6. A message will appear on the screen to let you know
if the command was received by your vehicle.
Mopar® Owner Connect website:
1. Log on to the Mopar® Owner Connect website
(moparownerconnect.com) using the username and
password you used when registering your Uconnect®
Access system.
NOTE:If you forgot your username or password, links
are provided on the website to help you retrieve them.
104 ALL ABOUT Uconnect® ACCESS

•Your request will typically take about to 3 minutes to
process. If your vehicle has been parked for a while it
can take up to 30 minutes for the request to reach your
vehicle and perform the task.
Requirements
•Vehicle must be properly equipped with the
Uconnect® Access System.
•Vehicle must be in range of a usable and authorized
cellular signal.
•Vehicle must be registered with Uconnect® Access and
have an active subscription that includes the appli-
cable feature or App.
•If using the Uconnect® Access App to command your
vehicle, your smartphone must be compatible and in
range of a cellular signal.
•An ignition cycle is required for some remote com-
mands such as Remote Vehicle Start and Remote Door
Lock/Unlock if following a Remote Horn and Lights
activation.
FAQs
1.How long does it take to unlock or lock the door?
Depending on various conditions, it can take three
minutes or more for the request to get through to your
vehicle, although Uconnect® is always striving to
improve performance.
2.Which is faster, my Key Fob or the Uconnect® Access
App?Your Key Fob will lock/unlock the door quicker,
however its range is limited and it can sometimes get
misplaced or locked in the vehicle. Your Uconnect®
Access App comes in handy for these and other
situations.
2
ALL ABOUT Uconnect® ACCESS 107

Description
The Remote Vehicle Start feature provides you with the
ability to start the engine on your vehicle, without the
keys and from virtually any distance. Once started, the
pre-set climate controls in your vehicle can warm-up or
cool-down the interior before you have to get in. You can
send a request to your vehicle in one of two ways:
•Using the Uconnect® Access App from a compatible
smartphone.
•From the Mopar Owner Connect website
(moparownerconnect.com).
You can also send a command to turn-off an engine that
has been remote started. After 15 minutes if you have not
entered your vehicle with the key, the engine will shut off
automatically.
This remote function requires your vehicle to be
equipped with a factory-installed Remote Start system.
If you want, you can set-up notifications for your account
to receive an email or text (SMS) message every time a
command is sent to remote start or cancel a remote start.
How It Works
Uconnect® Access App:
1. Download the Uconnect® Access App to a compatible
smartphone and login using your username and pass-
word.
2. To start the engine, press the “circular arrow”, to
turn-off an engine that has been remote started press
the “cancel” button.
2
ALL ABOUT Uconnect® ACCESS 109

3. A pop-up screen will appear asking for your
Uconnect® Security PIN (this is the same 4- digit code
established when your registered your Uconnect®
Access system). Enter the Uconnect® Security PIN on
the keypad and press “OK.”
4. The Uconnect® Access App will confirm if your
command was sent (or not). Press “OK” to close the
pop-up screen.
5. It will take a little while for the command to go
through to your vehicle. The time it takes depends on
a number of technical conditions.
6. A message will appear on the screen to let you know
if the command was received by your vehicle.
Mopar Owner Connect website:
1. Log on to the Mopar Owner Connect website
(moparownerconnect.com) using the username and
password you used when registering your Uconnect®
Access system.
NOTE:If you forgot your username or password, links
are provided on the website to help you retrieve them.
11 0 A L L A B O U T U c o n n e c t ® A C C E S S

Requirements
•Vehicle must be properly equipped with the
Uconnect® Access System and factory installed Re-
mote Start capabilities.
•Vehicle must be in range of a usable and authorized
cellular signal.
•Vehicle must be registered with Uconnect® Access and
have an active subscription that includes the appli-
cable feature or App.
•If using the Uconnect® Access App to command your
vehicle, your smartphone must be compatible and in
range of a cellular signal.
•An ignition cycle is required for some remote com-
mands such as Remote Vehicle Start and Remote Door
Lock/Unlock if following a Remote Horn and Lights
activation.
FAQs
1.How long does it take to remote start my vehicle?
Depending on various conditions, it can take three
minutes or more for the request to get through to your
vehicle, although Uconnect® is always striving to
improve performance.
2.Which is faster, my Key Fob or the Uconnect® Access
App?Your Key Fob will remote start your vehicle
quicker, however its range is limited. For example,
when you are leaving the stadium after the game, you
can remote start your vehicle to have the inside
comfortable before you even get there.
2
ALL ABOUT Uconnect® ACCESS 113

3.Will my vehicle be safe if I lose my smartphone?
People sometimes lose their phone, which is why
security measures have been engineered into the
Uconnect® Access App. Asking for your username,
password and Uconnect® Security PIN help to ensure
that nobody can start your vehicle if they happen to
find your smartphone.
4.Can someone drive off with my vehicle using the
App?No. Driving your vehicle still requires the keys
to be in the vehicle. The Remote Start feature simply
starts the engine to warm-up or cool down the interior
before you arrive, you cannot drive away without the
keys.
5.Can I stop a vehicle that is being driven by canceling
the engine start command?No. If a vehicle is driving
down the road the cancel Remote Start button will not
stop it. It simply cancels or ends a Remote Start of the
engine.
6.Why can’t all phones use the Uconnect® Access
App?The Uconnect® Access App has been designed
to work on most smartphones with the Apple and
Android operating systems. The capabilities of these
smartphone allows us to remotely command your
vehicle. Other operating systems may be supported in
the future.
Remote Horn And Lights
Can’t Find Your Vehicle In The Parking Lot? Sound The
Horn And Flash The Lights On Your Vehicle To Locate
It.
Description
It is easy to locate a vehicle in a dark, crowded or noisy
parking area by activating the horn and lights. It may
also help if you need to draw attention to your vehicle for
any reason. You can send a request to your vehicle in one
of three ways:
11 4 A L L A B O U T U c o n n e c t ® A C C E S S

•Using the Uconnect® Access App from a compatible
smartphone
•From the Mopar Owner Connect website
(moparownerconnect.com)
•Contacting Uconnect® Care
If you want, you can set-up notifications for your account
to receive an email or text (SMS) message every time a
command is sent to turn on the horn and lights.
How It Works
1. Download the Uconnect® Access App to a compatible
smartphone and login using your username and pass-
word.
2. To turn on the horn and lights, press the “trumpet
icon.” To turn-off the horn and lights, press the
“trumpet icon” again.
3. A pop-up screen will appear asking for your
Uconnect® Security PIN (this is the same 4- digit code
established when your registered your Uconnect®
Access system). Enter the Uconnect® Security PIN on
the keypad and press “OK.”
4. The Uconnect® Access App will confirm if your
command was sent (or not). Press “OK” to close the
pop-up screen.
5. It will take a little while for the command to go
through to your vehicle. The time it takes depends on
a number of technical conditions
6. A message will appear on the screen to let you know
if the command was received by your vehicle.
2
ALL ABOUT Uconnect® ACCESS 115

Mopar Owner Connect website:
1. Log on to the Mopar Owner Connect website
(moparownerconnect.com) using the username and
password you used when registering your Uconnect®
Access system.
•If you forgot your username or password, links are
provided on the website to help you retrieve them.
2. If you have more than one vehicle registered into the
Mopar Owner Connect website
(moparownerconnect.com), select the vehicle you
want to send the command by clicking on its image
along the top.
3. Beneath the image of a vehicle like yours, you will see
a row of icons. To turn on the horn and lights, press the
“trumpet icon.” To turn off the horn and lights, press
the “trumpet icon” again.
NOTE:A quicker way to turn off your Remote Horn and
Lights would be to push the “Panic” button on your Key
Fob if you are near the vehicle.
4. You will then be asked to enter your Uconnect®
Security PIN (this is the same 4-digit code established
when your registered your Uconnect® Access system).
Please enter your Uconnect® Security PIN.
11 6 A L L A B O U T U c o n n e c t ® A C C E S S