charging GENESIS G90 2023 User Guide

5-19
05
Starting the vehicle

[Ultra Wide Band unsupported smart
phone
- After placing your registered digital
key (smart phone) on the vehicle
authentication pad (wireless
charging pad), depress the brake
pedal and press the Engine Start/
Stop button.

[Ultra Wide Band supported smart
phone
- With the smart phone inside the
vehicle, depress the brake pedal
and press the Engine Start/Stop
button.
- To start the vehicle remotely, use
the App provided by the smart
phone manufacturer to lock the
vehicle with the door lock button,
and press the remote start button
within 4 seconds.
The vehicle starts and the hazard
warning lights blink.
- Press the remote start button again
to turn off the vehicle.
After starting the vehicle, the digital key
(smart phone ) may be removed from
the vehicle authentication pad (wireless
charging pad). Information
If a shared digital key (smart phone) is
used for the first time, the activating time
may take longer.

[Place the shared digital key
(smart phone) on the door handle
authentication pad until the vehicle
door lock/unlock activates.

[If a shared digital key (smart phone) is
first used on the vehicle authentication
pad (wireless charger pad), the initial
start of the vehicle may fail.

[If the door lock/unlock is activated
once with the shared digital key (smart
phone) or the vehicle is started with
the digital key (smart phone) on the
vehicle authentication pad, the digital
key (smart phone) will be registered in
the vehicle.

5-23
05
Using the digital key (card key)
The driver can lock or unlock the door by
placing the card key on the outside door
handle, and the vehicle can be started
by placing the card key on the vehicle
authentication pad (wireless charging
pad).
ORS052259N
A : Door handle authentication pad,
B : Card key NFC antenna
Locking/Unlocking the doors

[If the driver places the digital
key (card key) on the driver’s
or passenger’s door handle
authentication pad
A for more than 2
seconds, the door will lock or unlock.

[If the Two Press Unlock feature is set,
only the driver’s door pops out and
unlocks when the digital key (card key)
is placed on the driver’s door handle
authentication pad. Hold the digital
key (card key) near the driver’s door
handle authentication pad once more
within 4 seconds to unlock all doors.

[After unlocking the doors, the doors
will automatically re-lock after 30
seconds unless a door is opened.
Information
You cannot lock your vehicle using
the digital key (card key) if any of the
following occurs:
-The smart key is in the vehicle.
-The Engine Start/Stop button is in the
$&&RU21SRVLWLRQ
-Any of the doors, hood, or trunk are
open.
Starting the vehicle
After placing your registered digital key
(card key) on the vehicle authentication
pad (wireless charging pad), depress the
brake pedal and press the Engine Start/
Stop button.
For more details on the basic way to
start the vehicle, refer to “Engine Start/
Stop Button” section in chapter 6.
WARNING
The vehicle can be started when the
registered card key is placed on the
vehicle authentication pad (wireless
charging pad). Therefore, do not leave
unsupervised children or people who
are not aware of the system since it
can result in serious injury or death. In
addition, always have the registered
card key with you to prevent vehicle
theft when leaving the vehicle.

5-24
Convenience Features
NOTICE

[The digital key (card key) may not
work under the following conditions:
-The digital key (card key) is not
placed on the center of the
door handle authentication pad
or vehicle authentication pad
(wireless charging pad) correctly.
-The digital key (card key) is near
1)&HQDEOHGFDUGVVXFKDVFUHGLW
cards or smart phones.
-If the digital key (card key) does not
work, try again after moving the
digital key (card key) away from the
door handle authentication pad
(more than 4 in. (0.1 m)).

[The digital key (card key) can be
damaged by impacts. If the digital
key (card key) is damaged, replace
the digital key (card key) with a new
one and register it again.

[Long-time exposure to high
temperature may cause the digital
key (card key) to malfunction. Be
careful not to expose the digital key
(card key) to direct sunlight or high
temperature.
Deleting your digital key (card key)
1. Turn on the vehicle with a smart key.
Have your smart key with you in the
vehicle.
OJWEV051291N
2. From the infotainment system settings
PHQXVHOHFW
S6HWXS

5-27
05
Vehicle personalization with digital key
The available personalization function in the vehicle is as follows:
System Personalization Item
Infotainment
system vehicle
settingsHead Up Display (HUD)Position adjustment of image, Information
display selection
Lamp Blink number of one-touch signal lamps
ClusterInformation display on the cluster, Voice
volume, Welcome sound
Seat/Mirror/Steering
wheelSeat position, O/S mirror position, Steering
wheel position, Easy Access
Smart heating wire/ventilation On/Off
Door Automatic door lock/unlock, Two Press Unlock
Smart phone wireless
chargingWireless charging On/Off
Air conditioningSetting up temperature unit, Block air inflow/
Automatic ventilation/Window defroster On/
Off
Infotainment
menuNavigationPreferred volume of the navigation system
Recent destination
User preset My menu list settings, Radio preset
Phone connectivityBluetooth preferential connection
CarPlay/Android Auto/MirrorLink On/Off
Air conditioning Operating conditionLatest operation setup of the following
functions: Temperature (AUTO), air flow
direction, air volume, air conditioner, air intake
control, SYNC, Front windshield defroster,
OFF
For more information of personalization, refer to the infotainment system manual.
CAUTION
If you leave the digital key in the vehicle after locking or unlocking the doors or
starting the vehicle with the smart key, the doors can be locked with the central
door lock. Have the digital key with you at all times.

5-55
05
Motor Driven Power Steering
(MDPS)
The system assists you with steering the
vehicle. If the vehicle is turned off or
if the power steering system becomes
inoperative, you may still steer the
vehicle, but it will require increased
steering effort.
Should you notice any change in the
effort required to steer during normal
vehicle operation, have the system
checked by an authorized retailer of
Genesis Branded products.
CAUTION
If Motor Driven Power Steering does not
operate normally, the warning light
and the message ‘Check motor driven
power steering’ will illuminate on the
instrument cluster. You may steer the
vehicle, but it will require increased
steering efforts. Take the vehicle to an
authorized retailer of Genesis Branded
products and have the system checked
as soon as possible.
Information
The following symptoms may occur during
normal vehicle operation:

[The steering effort may be high
immediately after pressing the Engine
6WDUW6WRSEXWWRQWRWKH21SRVLWLRQ
This happens as the system performs
the MDPS system diagnostics. When
the diagnostics are completed, the
steering wheel effort will return to its
normal condition.

[When the battery voltage is low, you
might have to put more steering effort.
However, it is a temporary condition so
that it will return to normal condition
after charging the battery.

[A click noise may be heard from the
MDPS relay after the Engine Start/Stop
EXWWRQLVLQWKH21RU2))SRVLWLRQ

[Motor noise may be heard when the
vehicle is at a stop or at a low driving
speed.

[When you operate the steering wheel
in low temperatures, abnormal noise
may occur. If the temperature rises, the
noise will disappear. This is a normal
condition.

[When an error is detected from MDPS,
the steering effort assist function will
not be activated in order to prevent
fatal accidents. Instrument cluster
warning lights may be on or the
steering effort may be high. If these
symptoms occur, drive the vehicle to
a safe area as soon as it is safe to do
so. Have the system checked by an
authorized retailer of Genesis Branded
products as soon as possible.
STEERING WHEEL

5-157
05
USB Charger (if equipped)
ORS051098
ORS051099
ORS051200
A : Front seat,
B : Rear seat (if equipped),
C : Rear seat
The USB-C charger is designed to
recharge batteries of small size electrical
devices using a USB-C cable.
The electrical devices can be recharged
when the Engine Start/Stop button is in
the ON (or START) position.
The battery charging state may be
monitored on the electrical device.Disconnect the USB-C cable from the
USB port after use.

[A smart phone or a tablet PC may
get warmer during the re-charging
process. It does not indicate any
malfunction with the charging system.

[A smart phone or a tablet PC, which
adopts a different re-charging
method, may not be properly re-
charged. In this case, use an exclusive
charger of your device.

[The charging terminal is only to
recharge a device. Do not use the
charging terminal either to turn on
an audio or to play media In the
infotainment system.
Information
&KDUJLQJPD\QRWEHSRVVLEOHZKHQXVLQJ
D7\SH&FRQYHUWHUVROGE\DPRELOHSKRQH
manufacturer or commercially available.

5-158
Convenience Features
Wireless Smart Phone Charging
System (if equipped)
ORS051201
ORS051202
A : Front seat,
B : Rear seat (if equipped),
M : Indicator light,
N : Charging pad
Charging smart phone
The wireless smart phone charging
system charges only the Qi-enabled
smart phones (
). Read the label on
the smart phone accessory cover or
visit your smart phone manufacturer’s
website to check whether your smart
phone supports the Qi technology.The wireless charging process starts
when you put a Qi-enabled smart phone
on the wireless charging unit.
1. The system is available when all doors
are closed, and when the Engine
Start/Stop button is in the ON (or
START) position.
2. You can turn on or off the wireless
charging function from the Settings
menu. Select:
- Front seat (infotainment system):
6HWXS

5-159
05
The indicator light will blink orange for 10
seconds if there is a malfunction in the
wireless charging system.
In this case, temporarily stop the
charging process, and re-attempt to
charge your smart phone again.
The system warns you with a message on
the LCD display if the smart phone is still
on the wireless charging unit after the
vehicle is turned OFF and the front door
is opened.
For some manufacturer’s smart phones,
the system may not warn you even
though the smart phone is left on the
wireless charging unit. This is due to the
particular characteristic of the smart
phone and not a malfunction of the
wireless charging. Information

[The wireless smart phone charging
system may not support certain smart
phones, which are not verified for the
Qi specification (
).

[When placing your smart phone on the
charging pad, position the phone in the
middle of the mat for optimal charging
performance. If your smart phone is off
to the side, the charging rate may be
less and in some cases the smart phone
may experience higher heat conduction.

[In some cases, the wireless charging
may stop temporarily when the smart
key is used, either when starting the
vehicle or locking/unlocking the doors,
etc.

[When charging certain smart phones,
the charging indicator may not change
to blue when the smart phone is fully
charged.

[The wireless charging process may
temporarily stop, when temperature
abnormally increases inside the wireless
smart phone charging system. The
wireless charging process restarts,
when temperature falls to a certain
level.

[The wireless charging process may
temporarily stop when there is any
metallic item, such as a coin, between
the wireless smart phone charging
system and the smart phone.

5-160
Convenience Features

[When charging some smart phones
with a self-protection feature, the
wireless charging speed may decrease
and the wireless charging may stop.

[If the smart phone has a thick cover,
the wireless charging may not be
possible.

[If the smart phone is not completely
contacting the charging pad, wireless
charging may not operate properly.

[If the Engine Start/Stop button is in the
2))SRVLWLRQWKHFKDUJLQJDOVRVWRSV

[When any smart phone without a
wireless charging function or a metallic
REMHFWLVSODFHGRQWKHFKDUJLQJSDG
a small noise may sound. This small
sound is due to the vehicle discerning
FRPSDWLELOLW\RIWKHREMHFWSODFHGRQ
the charging pad. It does not affect
your vehicle or the smart phone in any
way.

[Some smart phones may not be able
to charge depending on the internal
structure of the smart phone. If this
occurs, try charging the mobile phone
by moving it to the left or right side of
the wireless charging pad. However, for
some foldable smart phones that have
magnets inside the smart phone, try
charging the smart phone while holding
it close to the left side of the wireless
charging pad.NOTICE
Some magnetic items like credit cards,
phone cards or rail tickets may be
damaged if left with the smart phone
during the charging process.
Information
This device complies with Part 15 of the
)&&UXOHV
2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWKUHH
conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any
interference received, including
interference that may cause undesired
operation.
3. &KDQJHVRUPRGLILFDWLRQVQRWH[SUHVVO\
approved by the party responsible
for compliance could void the user’s
authority to operate the device.

6-6
Driving Your Vehicle
Engine Stop/Start Button Positions
Button Position Action Notes
OFFTo turn off the engine, press the
Engine Start/Stop button with the
vehicle shifted to P (Park).
Note if the Engine Start/Stop
button is pressed with the vehicle
shifted to D (Drive) or R (Reverse)
or N (Neutral), the gear will
automatically shift to P (Park).
If the Engine Start/Stop button is
pressed with the gear shifted to
N (Neutral), the Engine Start/Stop
button will change to the ACC
position.
ACCPress the Engine Start/Stop button
when the button is in the OFF
position without depressing the
brake pedal.
Some of the electrical accessories
are usable.If you leave the Engine Start/Stop
button in the ACC position for
more than one hour, the battery
power will turn off automatically
to prevent the battery from
discharging.
ONPress the Engine Start/Stop button
while it is in the ACC position
without depressing the brake
pedal.
The warning lights can be checked
before the engine is started.Do not leave the Engine Start/Stop
button in the ON position when the
engine is not running to prevent
the battery from discharging.
STARTTo start the engine, depress the
brake pedal and press the Engine
Start/ Stop button with the gear
shifted to the P (Park) or the N
(Neutral) position.
For your safety, start the engine
with the gear shifted to the P
(Park) position.If you press the Engine Start/Stop
button without depressing the
brake pedal, the engine does not
start and the Engine Start/Stop
button changes as follows:
2))