GMC CANYON 2009 Get To Know Guide

Congratulations on your purchase of a GMC Canyon. Please read this information and your Owner Manual
to ensure an outstanding ownership experience. Note that your vehicle may not include all the features
described in this booklet. Keep this booklet with your Owner Manual for easy reference.
DRIVER INFORMATION
Instrument Panel . . . . . . . . . . . . . .2
Instrument Panel Cluster . . . . . . .3
Driver Information Center . . . . . . .4
SAFETY & SECURITY
Safety Belts . . . . . . . . . . . . . . . . . .5
Child Comfort Guide . . . . . . . . . . .5
Child Restraints (LATCH) . . . . . . .6
Automatic Door Locks . . . . . . . . .6
Rear Door Security Locks . . . . . .6
Passenger Airbag Status
Indicator . . . . . . . . . . . . . . . . . . . . .7
Content Theft-Deterrent System .7
OnStar
® . . . . . . . . . . . . . . . . . . . . . .8
COMFORT
Power Seats . . . . . . . . . . . . . . . . . .8
Heated Seats . . . . . . . . . . . . . . . . .9
Manual/Power Lumbar . . . . . . . . .9
Preventing Window Fogging . . . .9
ENTERTAINMENT
Audio Systems . . . . . . . . . . . . . . .9
Radio Antenna . . . . . . . . . . . . . . .11
CONVENIENCE
Headlamp Controls . . . . . . . . . . .12
Automatic Headlamp System . . .12
Fog Lamps . . . . . . . . . . . . . . . . . .12
Cargo Lamps . . . . . . . . . . . . . . . .13
Dome Lamp Override . . . . . . . . .13
Sunroof . . . . . . . . . . . . . . . . . . . . .13
Rear Seat Folding Operation . . .14Flexible Tailgate . . . . . . . . . . . . . .14
Cargo Tie-Downs and
Bed Rails . . . . . . . . . . . . . . . . . . .15
Two-Tier Loading and
Optional Bed Extender . . . . . . . .15
PERFORMANCE & MAINTENANCE
Starting Your Engine . . . . . . . . . .16
Resetting the Oil Life System . .16
Automatic Locking Differential .16
Four-Wheel Drive System . . . . . .16
StabiliTrak
®– Stability Control
System . . . . . . . . . . . . . . . . . . . . .19
Tire Pressure Monitor . . . . . . . . .19
OWNER INFORMATION
Roadside Assistance . . . . . . . . .20
My GMLink . . . . . . . . . . . . . . . . . .20

Getting to Know Your Canyon2
The main features of the instrument
panel include:
A. Air Outlets
B. Turn Signal/Multifunction Lever
C. Instrument Panel Cluster
D. Hazard Warning Flashers Button
E. Passenger Front Airbag
F. Exterior Lamp Controls
G. Parking Brake Release H. Horn
I. StabiliTrak Button/Four-Wheel Drive
Buttons (if equipped)
J. Audio System
K. Cigarette Lighter
(if equipped)
L. Climate Control System
M. Accessory Power Outlet
N. Passenger Airbag Status Indicator
O. Glove Box
See Section 3 of your Owner Manual.
Instrument Panel
DRIVER INFORMATION

3
See Section 3 of your Owner Manual.
Your vehicle’s instrument panel is
equipped with this cluster or one very
similar to it. The instrument panel cluster
includes these key features:
A. Tachometer
B. Fuel Gauge
C. Engine Coolant Temperature Gauge
D. Speedometer
E. Driver Information Center (DIC)
F. DIC Reset Stem
Note:The instrument panel cluster is
designed to let you know about many
important aspects of your vehicle’s
operation. It is important to read your
Owner Manual and become familiar with
the information being relayed to you
by the lights, gauges and indicators,
as well as what action can be taken to
ensure safety and to prevent damage.
Instrument Panel Cluster
ADBC
EF

Getting to Know Your Canyon4
Driver Information Center
Your vehicle’s Driver Information Center
(DIC) is located on the instrument panel
cluster. It features a message center
that can display information such as the
trip odometer, vehicle personalization
features and a number of messages or
warnings.
The odometer is automatically displayed
when the engine is started, and shows
the total distance the vehicle has been
driven in either miles or kilometers.
Scroll through the various DIC modes
• Press and release the control stem
located on the DIC.
Display trip odometer information
• Press and hold the control stem for
four seconds.
The display shows the distance traveled
since you last set the trip odometer to
zero.
Select the DIC language
1.
With the engine off, turn the key to On.
2. Close all doors.
3. Press and release the reset stem
until LANGUAGE is displayed.
4. To view each available language,
press and hold the reset stem for
two seconds.
5. Once the desired language is dis-
played, briefly press the reset stem
to set your choice.
Warnings and Messages
The following are examples of some of
the warnings or messages that may
appear in the DIC. Have your vehicle
serviced as soon as possible:
• BRAKE FLUID
(Brake fluid may be low)
• BRAKE SYSTEM
(Service the brake system)
• ABS (Brake system operates
normally without the antilock brake
system benefit)
• SERVICE TRACTION (Service
the Traction Control System)
• ENG HOT (Check your engine
coolant temperature gauge)
• SERVICE VEH (Service vehicle)
• LO FUEL (Check the fuel gauge and
fill the fuel tank as soon as possible)
• BATTERY (There is a problem
with the battery)
• CHECK FUEL CAP (Check to
ensure that the fuel cap is secure)
Acknowledge and clear a warning or
message
• Press and hold the control stem for
one second.
Note:To ensure your own safety and to
protect your vehicle warranty, it’s impor-
tant not to ignore the preceding warn-
ings. Acknowledge each one and attend
to them at your earliest convenience.

5
Check Warning Lights with OnStar
(if equipped)
If your vehicle is equipped with OnStar
and your Check Engine light or any
other warning message appears, you
can press the OnStar button and speak
to an OnStar Advisor. In many vehicles,
OnStar Advisors can access certain
diagnostic information and tell you how
serious the problem is and what you
should do about it.
See Section 3 of your Owner Manual.
SAFETY & SECURITY
Safety Belts
The safety belt shoulder straps feature
a park stitch (A) to prevent the safety
belt latch plate from contacting the
interior trim panel when the safety belt is
not in use. If you notice the latch plate
contacting the trim panel, make sure the
safety belt latch plate is located above
the park stitch in the belt.
A
Child Comfort Guide (Extended
Cabs and Crew Cabs only)
This feature provides added safety belt
comfort for smaller adults and for older
children who have outgrown booster
seats. When installed on a shoulder belt,
the comfort guide better positions the
belt away from the neck and head. One
comfort guide is provided for each rear
seat outboard position.
Safety Belt Reminder
When the ignition key is turned to On
or Start, a chime sounds for several
seconds to remind passengers to
buckle their safety belts. The safety belt
reminder light also illuminates and then
flashes for several seconds.
If the driver’s safety belt remains
unbuckled while the vehicle is in motion,
the chime will continue to sound and the
light will continue to flash.
See Sections 1 and 3 of your Owner Manual.

Getting to Know Your Canyon6
Child Restraints (LATCH)
Your vehicle is equipped with LATCH
anchors, and may have top tethers for
use with a LATCH-compatible child
restraint. If your child restraint is not
compatible with the LATCH system, you
may still use it by installing the child
restraint with the safety belt system.
Automatic Door Locks
(if equipped)
For your safety, vehicles equipped with
power door locks and Remote Keyless
Entry are programmed at the factory to
lock all doors automatically. The doors
will lock when all doors are closed, the
ignition is on and the gearshift lever is
moved out of Park on vehicles with an
automatic transmission, or when vehicle
speed is greater than 15 mph on vehi-
cles with a manual transmission. This
feature cannot be disabled.
You can personalize the automatic
unlock features through the Driver
Information Center.
See Sections 2 and 3 of your Owner Manual.
Rear Door Security Locks
(Crew Cab models)
Crew Cab models are equipped with
rear door security locks that allow you to
lock the rear doors so they cannot be
opened by passengers from the inside.
The lock switch (shown above) is locat-
ed on the inside edge of each rear door.
Install a comfort guide on a shoulder
belt
1. Pull the elastic cord out from between
the seatback and the interior body to
remove the guide from its storage
clip.
2. Slide the guide under and past the
safety belt (the elastic cord must be
under the belt).
3. Place the guide over the belt and
insert the two edges of the belt into
the slots of the guide. (Be sure that
the belt is not twisted and that it lies
flat. The elastic cord must be under
the belt and the guide on top.)
4. Buckle, position and release the
safety belt as described in Section
1 of your Owner Manual. Make sure
the belt crosses the passenger’s
shoulder.
Storing the Child Comfort Guide
To remove and store the comfort guides,
squeeze the belt edges together so that
you can take them out of the guides.
Slide the guide back on its storage clip
located between the interior body and
the seatback. Storing the comfort guide
properly will prevent possible rattling.
See Section 1 of your Owner Manual.
Choose a child restraint that is appropri-
ate for the child’s age and size (weight
and height).
See Section 1 of your Owner Manual.

7
Engage the rear door security locks
1. Open a rear door and insert your
ignition key into the lock.
2. On the driver’s side rear door, turn
the key clockwise to engage the rear
door security lock (turn it counter-
clockwise on the opposite side rear
door).
3. Close the door.
Open the rear door when the security
lock is on
• Unlock and open the door from
outside the vehicle.
Return the rear doors to normal use
• On the driver’s side rear door, insert
the key and turn the lock counter-
clockwise (turn it clockwise on the
opposite side rear door).
See Section 2 of your Owner Manual.
Passenger Airbag Status
Indicator
Your vehicle is equipped with a
Passenger Sensing System located in
the front passenger seat for the front
passenger frontal airbag, and a passen-
ger airbag status indicator located on
the center of the instrument panel.
See Sections 1 and 3 of your Owner Manual.
Note:It is recommended that children
not be placed in the front passenger
seat, even with the Passenger Sensing
System. All children should be secured
in a rear seat, including an infant riding
in a rear-facing infant seat, a child riding
in a forward-facing child seat or an older
child riding in a booster seat.
Content Theft-Deterrent System
(if equipped)
If your vehicle has the Remote Keyless
Entry (RKE) system, it also has a con-
tent theft-deterrent alarm system.
The content theft-
deterrent system is
armed when you
lock the doors with
the RKE transmitter
and all the doors
are closed. If the
lock button on the RKE transmitter is
pressed with a door open, the horn will
chirp several times. Close the door to
arm the system. The security light will
flash when the system is armed.
The system will not be armed if the
doors are locked with a key, the manual
door lock or the power door lock switch.
Alarm System
If a locked door is not opened using the
RKE transmitter or by OnStar, the horn
will chirp for several seconds and then
the alarm will sound. The alarm will flash
the front turn signal lamps and sound
the horn for two minutes.
To prevent the alarm from sounding,
unlock the doors using the RKE trans-
mitter. To turn off the alarm, press the
unlock button on the RKE transmitter or
start the engine using the correct key.
PASSlock
®
Your vehicle also is equipped with the
PASSlock theft-deterrent system that
requires the correct key be used to start
the engine. If the correct key is not used
or the ignition lock cylinder is tampered
with, the fuel system is disabled and the
engine will not start.
See Section 2 of your Owner Manual.

Getting to Know Your Canyon8
OnStar®(if equipped)
Your vehicle may feature the OnStar
Safe & Sound Plan or the uplevel
OnStar Directions & Connections Plan,
with one year of OnStar service from the
date you purchased your new vehicle.
OnStar offers a variety of capabilities,
such as Remote Door Unlock, Automatic
Notification of Airbag Deployment, and
Hands-Free Calling. In addition, most
vehicles can get driving directions using
Turn-by-Turn Navigation. Press the
OnStar button to ask an OnStar Advisor
about the service plan you have or to
upgrade your plan.
For more information, refer to
your OnStar Owner’s Guide, call
1-888-4-ONSTAR (1-888-466-7827),
or visit onstar.com.
See Section 2 of your Owner Manual.
COMFORT
Power Seats (if equipped)
On equipped vehicles, the power seat
controls are located on the outboard
sides of the front seats.
Raise or lower the front of the seat
• Lift or depress the front edge of the
control (A).
Raise or lower the rear of the seat
• Lift or depress the rear of the control
(B).
Move the seat forward or rearward
• Move the entire control forward or
rearward.
Raise or lower the seat
• Lift or depress the entire control.
Move the reclining front seatback
forward or rearward
• Move the recliner control (C) forward
or rearward.
See Section 1 of your Owner Manual.
A
BC

9
The heated seat controls are located on
the outboard sides of the front seats.
(The ignition must be on for this feature
to work.)
Activate the heated seats
• Press the lower part of the switch to
turn on the heater to the LO setting.
• Press the upper part of the switch to
turn on the heater to the HI setting.
• Place the switch in the center position
to turn the heater off.
See Section 1 of your Owner Manual.
Note:In order for the passenger heated
seat to operate, the passenger safety
belt must be buckled.
Manual/Power Lumbar
(if equipped)
The manual lumbar control knob is
located on the outboard side of the driv-
er’s seat. Turn the knob counterclock-
wise to increase lumbar support and
clockwise to decrease lumbar support.
The power lumbar control switches for
the driver and passenger seats are
located on the outboard side of the
seats.
See Section 1 of your Owner Manual.
Preventing Window Fogging
ENTERTAINMENT
Audio Systems
AM/FM Stereo (if equipped)
Set the clock on the AM/FM stereo
radio
• Press and hold the HR button until
the correct hour appears.
• Press and hold MIN until the correct
minute appears.
Display the time with the ignition off
• Press RCL, HR or MIN. To clear fog or frost from the windshield
or side windows, turn the airflow control
knob to one of the following modes:
(Floor/Defog):Use to clear the
windows of moisture and to warm
passengers. This mode splits the air
delivery between the windshield and
the floor outlets.
(Defrost):Use to remove fog or
frost from the windshield more quickly.
This mode directs most of the air to
the windshield.
When you select the floor/defog or
defrost mode, the system automatically
turns off the recirculation mode and
runs the air conditioning compressor.
The recirculation mode cannot be
selected because outside air is needed
to remove interior moisture from the
vehicle.
See Section 3 of your Owner Manual.
Heated Seats (if equipped)

Getting to Know Your Canyon10
Presetting Radio Stations
You can set up to 18 station presets
(six AM, six FM1 and six FM2) using the
process shown below.
Set a station
1. Turn the radio on.
2. Press the BAND button to select the
band (AM, FM1 or FM2).
3. Tune to the desired station using the
seek function or tune knob.
4. Press AUTO EQ or AUTO TONE (on
equipped audio systems, as applies
to your radio) to select the sound
equalization best suiting the type of
station selected.
5. Press/hold a numbered button until a
beep confirms storage of the station.
6. Repeat the previous steps for each
pushbutton.
AM/FM Stereo with CD/MP3 and
Radio Data System (if equipped)
Set the clock on RDS-equipped radios
• Press and hold HR and MN simul-
taneously for two seconds until
UPDATED and the clock symbol
appear on the display.
If the time is not available from the
station, NO UPDAT will appear. Using the RDS
Radios equipped with RDS mode allow
you to:
• Seek only stations with your
preferred programming type.
• Seek stations with traffic
announcements.
• Receive announcements of local
and/or national emergencies.
• Receive and display messages from
radio stations.
RDS features are available only on FM
stations that broadcast RDS information.
When tuned to an RDS station, the radio
displays the station name instead of the
frequency. Most RDS stations broadcast
their station name, time of day and a
Program Type (PTY).
Access the traffic announcement
feature
• Press the TRAF button.
Access radio station messages
• Press the INFO button when INFO
appears on your radio display.
Access Program Type selections
1. To turn Program Type on, press the
SEEK TYPE button once.
2. Turn the P-TYPE knob to select the
Program Type you want.
3. Press the SEEK or SEEK TYPE but-
ton and the radio seeks to the first
available RDS broadcast of the
selected Program Type.