navigation system HONDA PILOT 2019 Navigation Manual (in English)
Page 51 of 127
49
System Setup
Location History
H (Home) uNavigation uuSettings uLocation History
Set the history data usage or clear the travel data. Select an option.
The following options are available:
• Travel Data Recording : Allows the system to record  your travel data used for 
predictions.
• Predicted Destination Alert : Sets whether the system provides the predicted 
destination.
2 Predicted Destination  P. 70
•Remove All myTrendsTM Places : Deletes all myTrends places.
• Clear Off-Road Breadcrumbs : Clears off-road breadcrumbs appear on the 
map.
19 PILOT NAVI-31TG78300.book  49 ページ  2018年5月24日 木曜日 午前10時52分 
Page 52 of 127
50
System Setup
About
H (Home) uNavigation uuSettings uAbout
Select an option.
The following options are available:
• System Information : Displays the system information.
• EULAs : Displays end-user license agreements.
• Copyright and Acknowledgments : Displays copyright and acknowledgments 
information.
• Restore Navigation Settings: Restores navigation settings to the factory 
defaults.
2 Reset Factory Default Settings  P. 51
19 PILOT NAVI-31TG78300.book  50 ページ  2018年5月24日 木曜日 午前10時52分 
Page 53 of 127
51
System Setup
Data Reset
Reset Factory Default Settings
H (Home) uNavigation uuSettings uAbout
You can restore all settings to the factory default values. 1.Select  Restore Navigation 
Settings .
2. Select  Restore .1Reset Factory Default Settings
When you want to reset the following options, see 
the below references:
•Home 2 Deleting Saved Locations  P. 25
•Saved
2 Deleting Saved Locations  P. 25
•Recents
2 Recents P. 68
•myTrips
2 Deleting Saved Trips  P. 29
When you transfer the vehicle to a third party, reset 
all settings to default a nd delete all personal data.
19 PILOT NAVI-31TG78300.book  51 ページ  2018年5月24日 木曜日 午前10時52分 
Page 56 of 127
54
Navigation
Entering a Destination
H (Home) uNavigation u
This section describes how to enter a destination for route guidance. Select an option.
The following options are available:
• Keyword or Address, State : Sets a destination by entering a keyword, address 
or state name.
2 Using the Search Bar  P. 56
•Searching near : Selects the city to search near.
2Changing the Search Area  P. 57
•Go Home : Sets your home address as the destination.
2Going Home P. 8
•Search Tools : Sets a destination by searching for a place.
2Search Tools P. 60
•Saved : Sets a destination by selecting  a place stored in the Saved list.
2Saved  P. 68
•Recents : Sets a destination by selecting a previous destination.
2Recents  P. 68
•Categories : Sets a destination by selecting a category.
2Categories  P. 67
•myTrips : Sets a destination by selecting a saved route.
2myTrips  P. 69
1Entering a Destination
The Display Audio system  can only provide route 
guidance from one naviga tion system at a time. 
When setting a destination  on one system, any active 
route guidance with the other system is canceled, 
and the system you are currently using will direct you 
to your destination. 
If you press the   (Hom e) button on the steering 
wheel, select  Navigation and then press the  ENTER 
button, the following item s are available. Use the 
steering wheel buttons  to select the items.
•Go Home
•Saved•Recent
When en route, the following item is available. 
•Cancel Route
 (Home) Button
19 PILOT NAVI-31TG78300.book  54 ページ  2018年5月24日 木曜日 午前10時52分 
Page 59 of 127
Continued57
uuEntering a Destination u
Navigation
H (Home) uNavigation uuSearching near
By default, your system finds locations closest to your current location. You can find 
a location near another city or location. Select an option.
The following options are available:
• My Active Route : Searches along your current route.
• My Destination : Searches near your current destination.
• My Current Location : Searches near your current location.
• A Different City : Searches near the city you select.
• Recent Places: Searches near a recent destination.
• Saved Places : Searches near a saved place.
■Changing the Search Area1
Changing the Search Area
My Active Route  and My Destination  can be set 
when the route is active.
19 PILOT NAVI-31TG78300.book  57 ページ  2018年5月24日 木曜日 午前10時52分 
Page 63 of 127
Continued61
uuEntering a Destination uSearch Tools
Navigation
H  (Home) uNavigation uuSearch Tools uAddress
Enter an address to us e as the destination.
1.Enter the house number and street 
name.
u Select  Searching near  if you 
want to search different city.
2. Select  Done or a suggestion.
3. Select your destination from the 
list.
4. Select  Go! to set the route to your 
destination.
2 Calculating the Route  P. 72
■Finding an Address1
Finding an Address
Using Voice Command
You can say the entire a ddress at once using voice 
commands.
From the Voice Portal screen, say   “ Navigation.”
Say  “ Find Address ” on the voice command 
screen, then say the entire address (e.g., “ 1-2-3-4 
Main Street, Los Angeles, California ”).
Say  “ Change Country ” if you want to change the 
country.
The system interprets the address.
Say  “ Yes” or a line number of a screen if the 
destination list appears (e.g.,   “ 1”).
Say  “ Go” to set the route.
2 Using Voice Commands  P. 5
2 Voice Control Operation  P. 11
The order of the steps may change depending on the 
map data loaded on your system.
19 PILOT NAVI-31TG78300.book  61 ページ  2018年5月24日 木曜日 午前10時52分 
Page 72 of 127
70
uuEntering a Destination umyTrendsTM
Navigation
myTrendsTM
H  (Home) uNavigation uumyTrendsTM
Select a frequently-visited plac e to use as the destination.
1.Select your destination from the 
list.
2. Select  Go! to set the route to your 
destination.
2 Calculating the Route  P. 72
When you start the vehicle,  the system predicts the most -likely destination based on 
your travel data. It displays the notifica tion window to offer the destination and 
show related information.
Select Go! to accept the predicted 
destination.
1 myTrendsTM
Set  Travel Data Recording  to On to use myTrends 
feature.
2 Location History  P. 49
You can delete myTrends lo cation. Select the location 
to remove, select   and then select  Remove.
To delete all myTrends lo cations, select   without 
selecting any location and then select  Remove All in 
the myTrends list screen.
■ Predicted Destination1
Predicted Destination
To use this feature, set  Predicted Destination Alert  
to  On .
2 Location History  P. 49
The notification will be que ued in the queue indicator 
after a certain peri od of time. Select the indicator to 
display the predicted destination.
19 PILOT NAVI-31TG78300.book  70 ページ  2018年5月24日 木曜日 午前10時52分 
Page 74 of 127
72
Navigation
Calculating the Route
This section describes how to calculate your route.Select Go!.
u The system calculates and displays 
the route line on the map screen.
The following options are available:
• Explore This Venue : Displays a list of all POIs within the venue.
This option is available for so me multiple facilities, such as hospitals or shopping 
centers.
• Routes : Displays different routes.
2Viewing and Selecting the Routes  P. 73
•Info : Displays detailed location information.
2Viewing the Location Information  P. 74
1Calculating the Route
If the route is very long, th e system will calculate the 
route to the first guida nce point and start the 
guidance. The system will  then continue calculation 
to final destination as you proceed.
Select   to view the map with the location 
centered.
19 PILOT NAVI-31TG78300.book  72 ページ  2018年5月24日 木曜日 午前10時52分 
Page 75 of 127
73
uuCalculating the Route uViewing and Selecting the Routes
Navigation
Viewing and Selecting the Routes
View and select different ro utes to your destination.
1.Select your desired route.
u The estimated arrival time and 
travel distance are displayed for 
each route.
2. Select  Go!.
u The system calculates and 
displays the route line on the 
map screen.
19 PILOT NAVI-31TG78300.book  73 ページ  2018年5月24日 木曜日 午前10時52分 
Page 76 of 127
74
uuCalculating the Route uViewing the Location Information
Navigation
Viewing the Location Information
1. Select an option.
2. Select  Go!.
u The system calculates and 
displays the route line on the 
map screen.
The following options are available:
• Save : Adds the destination to the saved location list.
2Saved Locations P. 19
•Set Location : Sets the vehicle position when  you are indoors or not receiving 
satellite signals.
You can use this feature when  GPS Simulator is set to on.
2Navigation  P. 40
•Routes : Displays different rout es to the destination.
2Viewing and Selecting the Routes  P. 73
•Routes Settings : Changes the route preferences.
2Navigation  P. 40
19 PILOT NAVI-31TG78300.book  74 ページ  2018年5月24日 木曜日 午前10時52分