stop start HYUNDAI IONIQ 6 2023 Manual Online

Page 293 of 582

6
6-5
Start/Stop Button Positions
Information To prevent vehicle battery discharge, the Start/Stop button changes to the OFF position when the
Start/Stop button is in the ACC or ON position with the gear in P (Park) for a certain period of
time. When the function operates, the tail lights will turn off. To use the tail lights again, turn the
headlight switch located on the steering column to the OFF and ON position again.

Button
PositionActionNotes
OFF To turn off the vehicle, press the
Start/Stop button with the vehicle
shifted to P (Park). If the Start/Stop
button is pressed with the vehicle
shifted to D (Drive), R (Reverse) or N
(Neutral), the gear automatically
shifts to P (Park). If the steering wheel is not locked
properly when you open the driver’s
door, the warning chime sounds.
ACC Press the Start/Stop button when the
button is in the OFF position without
depressing the brake pedal. Some of
the electrical accessories are usable.
The steering wheel unlocks.
If you leave the Start/Stop button in
the ACC position for more than one
hour, the battery power turns off
automatically to prevent the battery
from discharging. If the steering
wheel does not unlock properly, the
Start/Stop button does not work.
Press the Start/Stop button while
turning the steering wheel right and
left to release.
ON Press the Start/Stop button while it is
in the ACC position without
depressing the brake pedal. The
warning lights can be inspected
before the vehicle is started. Do not leave the Start/Stop button in
the ON position when the vehicle is
not running to prevent the battery
from discharging.
START To start the vehicle, depress the brake
pedal and press the Start/Stop button
with the gear shifted to the P (Park)
position. If you press the Start/Stop button
without changes as follows:
OFF >
ACC > ON > OFF or ACC
Hyundai_CE_en_US.book Page 5

Page 294 of 582

Driving Your Vehicle
6-6
Starting the Vehicle
WARNING • Always wear appropriate shoes when operating your vehicle. Unsuitable
shoes, such as high heels, ski boots,
sandals, flipflops, etc., may interfere
with your ability to use the brake and
accelerator pedals.
• Do not start the vehicle with the accelerator pedal depressed.
The vehicle can move which can lead to
an accident.

Information • The vehicle will start by pressing the Start/Stop button, only when the smart key
is in the vehicle.
• The vehicle may not start even if the smart key is in the vehicle but it is not near you
(for example, in the cargo area).
• When the Start/Stop button is in the ACC or ON position, if any door is open, the system
checks for the smart key. When the smart
key is not in the vehicle, the indicator
will blink and the warning 'Key not in
vehicle' will come on. When all doors are
closed, the chime will also sound for about
5 seconds. Keep the smart key in the vehicle
when in the ACC position or if the vehicle
is in the ready mode ( indicator on).

1. Always carry the smart key with you.
2. Make sure the parking brake is applied.
3. Make sure the gear is in P (Park).
4. Depress the brake pedal.
5. Press the Start/Stop button. If the vehicle starts, the indicator
illuminates.
Information • Always start the vehicle with your foot on the brake pedal. Do not depress the
accelerator while starting the vehicle. Do
not race the motor while warming it up.
• If ambient temperature is low, the indicator may remain illuminated longer
than the normal amount of time.

NOTICE7RSUHYHQWGDPDJHWRWKHYHKLFOH
[ ,IWKHYHKLFOHWXUQVRIIZKLOH\RXDUHLQ PRWLRQGRQRWDWWHPSWWRVKLIWWKHJHDU
WRWKH3 3DUN\fSRVLWLRQ
,IWUDIILFDQGURDGFRQGLWLRQVSHUPLW
\RXPD\SXWWKHJHDULQ1 1HXWUDO\f
ZKLOHWKHYHKLFOHLVVWLOOPRYLQJDQG
SUHVVWKH6WDUW6WRSEXWWRQLQDQ
DWWHPSWWRUHVWDUWWKHYHKLFOH
[ 'RQRWSXVKRUWRZ\RXUYHKLFOHWRVWDUW WKHYHKLFOH

NOTICE7RSUHYHQWGDPDJHWRWKHYHKLFOH
'RQRWSUHVVWKH6WDUW6WRSEXWWRQIRU
PRUHWKDQVHFRQGVH[FHSWZKHQWKH
VWRSOLJKWIXVHLVEORZQ
:KHQWKHVWRSOLJKWIXVHLVEORZQ\RX
FDQQRWQRUPDOO\VWDUWWKHYHKLFOH
5HSODFHWKHIXVHZLWKDQHZRQH,I\RX
DUHQRWDEOHWRUHSODFHWKHIXVH\RXFDQ
VWDUWWKHYHKLFOHE\SUHVVLQJDQGKROGLQJ
WKH6WDUW6WRSEXWWRQIRUVHFRQGVZLWK
WKH6WDUW6WRSEXWWRQLQWKH$&&SRVLWLRQ
3UHVVLQJWKHEUDNHSHGDOPDQ\WLPHV
ZKHQWKHYHKLFOHLVQRWLQWKHUHDG\PRGH
LQGLFDWRURII\fLQFUHDVHVWKH
SRVVLELOLW\RIGLVFKDUJLQJWKH9EDWWHU\
)RU\RXUVDIHW\DOZD\VGHSUHVVWKHEUDNH
SHGDOEHIRUHVWDUWLQJWKHYHKLFOH

Hyundai_CE_en_US.book Page 6

Page 295 of 582

6
6-7
Information Virtual Engine Sound System (VESS)
VESS generates virtual engine sound to make
pedestrians to aware. VESS operates when the
vehicle can be driven. When the vehicle in P
(parking) gear status, VESS doesn't work.

CAUTION Always check your surroundings while
driving, backing up, or before driving
from a stop because your electric vehicle
does not make vehicle sounds.

Emergency starting
B6000501
If the smart key battery is weak or the
smart key does not work correctly, press
the Start/Stop button with the smart key
in the direction of the illustration shown
above.
Turning Off the Vehicle
1. Stop the vehicle and depress the brake pedal fully.
2. Shift to P (Park).
3. Press the Start/Stop button to the OFF position and apply the parking brake.
4. Make sure the indicator is turned off on the instrument cluster.
CAUTION If the indicator on the instrument
cluster is still on, the vehicle is not turned
off and can move when the gear is in any
position except P (Park).

Remote Start
Type A
B6000701Type B
B6000702
You can start the vehicle using the
Remote Start button of the smart key.
To start the vehicle remotely:
1. Press the door lock button within 32 ft. (10 m) from the vehicle.
2. Press and hold the remote start ( ) button within 4 seconds.
To turn off the vehicle:
Press the remote start button ( ) once.
Hyundai_CE_en_US.book Page 7

Page 296 of 582

Driving Your Vehicle
6-8
Information • The vehicle does not remotely start if the hood or trunk is opened.
• The vehicle must be in P (Park) for the remote start function to start.
• The vehicle turns off if you get in the vehicle without a registered smart key or
you do not get in the vehicle within 10
minutes.

SHIFT BY WIRE
B6013601[A] Rotary shifter
[B] P button
Shift By Wire Operation
Depress the brake pedal whenever
rotating the rotary shifter to change gear
or selecting P.
WARNING To reduce the risk of serious injury or
death:
• ALWAYS check the surrounding areas near your vehicle for people, especially
children, before shifting a vehicle into D
(Drive) or R (Reverse).
• Before leaving the driver's seat, always make sure the vehicle is shifted to the P
(Park) position, then apply the parking
brake, then press the Start/Stop button
to the OFF position. Unexpected and
sudden vehicle movement can occur if
these precautions are not followed.

Hyundai_CE_en_US.book Page 8

Page 298 of 582

Driving Your Vehicle
6-10
NOTICE$OZD\VFRPHWRDFRPSOHWHVWRSEHIRUH
VKLIWLQJLQWRRURXWRI5 5HYHUVH\fWR
SUHYHQWGDPDJLQJWKHJHDU

N (Neutral)
B6013703
To shift the gear to N (Neutral), rotate the
rotary shifter to N (Neutral) while
depressing the brake pedal.
Always depress the brake pedal when you
are shifting from N (Neutral) to another
gear.
If you turn the vehicle off in N (Neutral),
the gear will automatically shift to P
(Park).
However, if you need to stay in N
(Neutral) with the vehicle off, refer to the
“To stay in N (Neutral) when vehicle is
OFF” in the following description.
To rotate the rotary shifter to N (Neutral),
rotate the rotary shifter once clockwise or
counterclockwise.
If the current gear position is in D (Drive),
rotate the rotary shifter
counterclockwise. When the gear
position is in R (Reverse), rotate the rotary
shifter clockwise.
To stay in N (Neutral) when vehicle is
OFF
B6013705
B6013706
[A] OK button
If you want to stay in N (Neutral) after the
vehicle is in the ACC state, do the
following:
1. Turn off Auto Hold and release Electronic Parking Brake when the
vehicle is on ( indicator on).
2. Rotate the rotary shifter to N (Neutral) while depressing the brake pedal.
3. Take your foot off the brake pedal. The message ‘Press and hold OK button
Press and hold the OK button on the
steering wheel to stay in Neutral'
appears on the cluster display.
4. Press and hold the OK button on the steering wheel for more than 1 second.
5. When the message ‘Vehicle will stay in
(N). Change gear to cancel’ appears on
the cluster display, press the Start/Stop
button while depressing the brake
pedal.
However, if you open the driver’s door
within 3 minutes in the ACC state, the
1SFTTBOEIPMEUIF0,
CVUUPOPOUIFTUFFSJOH
XIFFMUPTUBZJO/FVUSBM
Hyundai_CE_en_US.book Page 10

Page 299 of 582

6
6-11
gear automatically shifts to P (Park) and
the Start/Stop button changes to the OFF
position.
NOTICE[ :LWKWKHJHDULQ1 1HXWUDO\fWKH6WDUW6WRSEXWWRQZLOOEHLQWKH$&&
SRVLWLRQ1RWHWKDWWKHGRRUVFDQQRWEH
ORFNHGLQWKH$&&SRVLWLRQRUWKH
EDWWHU\ 9\fPD\GLVFKDUJHLIOHIWLQWKH
$&&SRVLWLRQIRUDORQJSHULRG
[ %HIRUHHQWHULQJDQDXWRPDWLFFDUZDVK UHOHDVHWKH(OHFWURQLF3DUNLQJ%UDNH
(3%\fPDQXDOO\,I(3%LVDSSOLHGLWPD\
GDPDJHWKHYHKLFOHRUDXWRPDWLFFDU
ZDVK

Information When the Electronic Parking Brake (EPB) is
applied, press the EPB switch while
depressing the brake pedal.
The Electronic Parking Brake (EPB) must be
released manually because EPB does not
release automatically even though the gear is
shifted to N (Neutral).

D (Drive)
This is the normal driving position.
The regenerative braking system
automatically activates according to the
road conditions.
B6013707
To shift the gear to D (Drive), rotate the
rotary shifter to D (Drive) while
depressing the brake pedal.
When the vehicle is stopped in the D
(Drive) position, if you open the driver's
door, the gear may automatically shift to
P (Park).
However, if the vehicle is in motion, the
gear may not automatically shift to P
(Park) to prevent gear damage.
NOTICE$OZD\VFRPHWRDFRPSOHWHVWRSEHIRUH
VKLIWLQJLQWR' 'ULYH\f

CAUTION When you drive after stopping on a steep
incline, if you do not depress the
accelerator pedal or brake pedal, the
vehicle may roll backwards resulting in a
collision.

Hyundai_CE_en_US.book Page 11

Page 300 of 582

Driving Your Vehicle
6-12
When the battery (12 V) is discharged
You cannot shift gears when the battery is
discharged.
Jump start your vehicle (refer to the
"Jump Starting (12 V battery)" section in
chapter 8) or contact an authorized
HYUNDAI dealer.
Parking
Always come to a complete stop and
continue to depress the brake pedal. Shift
the gear to P (Park), apply the parking
brake, and press the Start/Stop button to
the OFF position. Take the key with you
when leaving the vehicle.
Cluster Display Messages
Information
Press brake pedal to change gear
B6013801
This message is displayed when the brake
pedal is not depressed while shifting out
of P (Park).
Depress the brake pedal and then shift
the gear.
Shift to P after stopping
B6013802
This message is displayed when the gear
is shifted to P (Park) while the vehicle is
moving.
Stop the vehicle before shifting to P
(Park).
Shifter system malfunction
B6013803
This message is displayed when the shift
gear does not properly operate in the P
(Park) position.
Have the vehicle inspected by an
authorized HYUNDAI dealer.
1SFTTCSBLFQFEBMUPDIBOHFHFBS
4IJGUUP1BGUFSTUPQQJOH
4IJGUFSTZTUFNNBMGVODUJPO
Hyundai_CE_en_US.book Page 12

Page 308 of 582

Driving Your Vehicle
6-20
holding the right paddle shifter ( ) for
over one second.
If the smart regeneration system does not
operate normally after the sensor has
been uncovered or unblocked, have the
vehicle inspected by an authorized
HYUNDAI dealer.
Smart Regeneration System
Precautions
• Always monitor the distance to vehicles ahead on the road. The smart
regeneration system is not a substitute
for safe driving practices, but a
supplemental function only.
• Always maintain a safe distance from the vehicles ahead and adjust your
vehicle speed to the road conditions.
The smart regeneration system may not
recognize unexpected and sudden
situations or complex driving
situations.
General precautions
• Always maintain a safe distance from the vehicles ahead and adjust your
vehicle speed depending on the road
conditions.
• Always prepare for unexpected situations and depress the brake pedal
to decelerate when necessary. The
smart regeneration system cannot
react to pedestrians, vehicles making a
sudden stop and vehicles coming from
the opposite lane.
• If the vehicle ahead frequently changes the lane, keep your eyes forward to be
prepared for hazardous situations. In
this case, the smart regeneration
system may respond late and may
inappropriately respond to vehicle
movements from the side lanes.
• The driver must depress the brake pedal when stopping the vehicle.
• Depress the brake pedal to decelerate in the following conditions when: - The front part of the vehicle is lifted
up because of the cargo loaded on
the rear part of the vehicle.
- You are operating the steering wheel.
- You are not driving in the center of the lane.
- You are driving on a narrow or curved road.
• The smart regeneration system may be temporarily turn off when exposed to
strong electromagnetic waves.
• If the vehicle starts coasting near the speed camera and engages the brake
with the smart regeneration system,
the vehicle may not be able to keep the
speed limit. Always comply with the
road and traffic law.
Sensor precautions
• Never disassemble the radar or radar assembly, and never apply any impact
on it.
• If there is impact on or near the radar, the sensors may be damaged or not be
properly aligned near the radar, even
though a warning message does not
appear on the instrument cluster, the
Smart Regeneration System may not
operate properly. Have the vehicle
inspected by an authorized HYUNDAI
dealer.
• If the radars have been replaced or repaired, have the vehicle inspected by
an authorized HYUNDAI dealer.
• Use only genuine parts to repair the bumper where the radar is located.
• Do not install a license plate frame or other objects such as bumper sticker,
film, bumper guard, or bumper wrap
near the radar.
• The Smart Regeneration System may not work properly if the bumper has
been replaced, or the surroundings of
the radar has been damaged or
painted.
Hyundai_CE_en_US.book Page 20

Page 312 of 582

Driving Your Vehicle
6-24
Electronic Parking Brake (EPB)
Applying the parking brake
To apply EPB (Electronic Parking Brake):
B6003801
1. Depress and hold the brake pedal.
2. Pull up the EPB switch.
Make sure the Parking Brake warning light
comes on.
EPB (Electronic Parking Brake) may be
automatically applied when:
• Requested by other systems.
• The driver turns the vehicle off while Auto Hold is operating.
Emergency braking
If there is a problem with the brake pedal
while driving, emergency braking is
possible by pulling up and holding the
EPB switch. Braking is possible only while
you are holding the EPB switch. However,
braking distance will be longer than
normal.
WARNING To reduce the risk of SERIOUS INJURY or
DEATH, do not operate the EPB while the
vehicle is moving except in an emergency
situation. It could damage the brake
system and lead to an accident.

Information During emergency braking, the Parking Brake
warning light will illuminate to indicate that
the system is operating.

NOTICE,I\RXFRQWLQXRXVO\QRWLFHDQRLVHRU
EXUQLQJVPHOOZKHQWKH(3%LVXVHGIRU
HPHUJHQF\EUDNLQJKDYHWKHV\VWHP
LQVSHFWHGE\DQDXWKRUL]HG+<81'$,
GHDOHU

Releasing the parking brake
To release EPB (Electronic Parking
Brake):
B6003803
1. Press the Start/Stop button to the ON or START position.
2. Press the EPB switch while depressing the brake pedal.
Make sure the Parking Brake warning light
goes off.
Hyundai_CE_en_US.book Page 24

Page 313 of 582

6
6-25
To release EPB (Electronic Parking Brake)
automatically:
• Gear in P (Park)With the vehicle on ( indicator on)
depress the brake pedal and shift out of
P (Park) to R (Reverse) or D (Drive).
• Gear in N (Neutral) With the vehicle on ( indicator on)
depress the brake pedal and shift out of
N (Neutral) to R (Reverse) or D (Drive).
• Satisfy the following conditions 1. Ensure seat belts are fastened and the doors, hood and trunk are closed.
2. With the vehicle on ( indicator on), depress the brake pedal and shift
out of P (Park) to R (Reverse), D
(Drive) or Manual shift mode.
3. Depress the accelerator pedal.
Make sure the Parking Brake warning light
goes off.
Information • You can engage EPB even though the Start/Stop button is in the OFF position
(only if battery power is available), but you
cannot release it.
• Depress the brake pedal and release the parking brake manually with the EPB
switch before you drive downhill or when
backing up.

NOTICE[ ,IWKH3DUNLQJ%UDNHZDUQLQJOLJKWLVVWLOO RQHYHQWKRXJKWKH(3%KDVEHHQ
UHOHDVHGKDYHWKHV\VWHPLQVSHFWHGE\
DQDXWKRUL]HG+<81'$,GHDOHU
[ 'RQRWGULYH\RXUYHKLFOHZLWK(3% DSSOLHG,WPD\FDXVHH[FHVVLYHEUDNH
SDGDQGEUDNHURWRUZHDU

Warning messages
To release EPB, close the doors, hood and
trunk and fasten the seatbelt
B6003804
If the driver&#39;s seat belt is unfastened, or
the hood, trunk, doors are open, and you
try to drive with EPB applied, a warning
sounds and a message appears.
WARNING To prevent serious injury or death from
unintended vehicle movement:
• Always come to a complete stop and continue to depress the brake pedal
before parking, shift the gear into P
(Park), pull up the EPB switch, and press
the Start/Stop button to the OFF
position. Take the key with you when
leaving the vehicle.
• Never allow anyone who is unfamiliar with the vehicle to touch the EPB
switch.
• Only release EPB when you are seated inside the vehicle with your foot firmly
on the brake pedal.

NOTICE'ULYLQJZLWKWKHSDUNLQJEUDNHRQPD\
RYHUKHDWWKHEUDNLQJV\VWHPDQGFDXVH
SUHPDWXUHZHDURUGDPDJHWREUDNH
SDUWV

5PSFMFBTF&1#
GBTUFOTFBUCFMUBOE DMPTFEPPS
IPPE BOEUSVOL
Hyundai_CE_en_US.book Page 25

Page:   < prev 1-10 ... 41-50 51-60 61-70 71-80 81-90 91-100 101-110 111-120 121-130 ... 130 next >