change time INFINITI Q70 HYBRID 2014 Navigation Manual

*7<ZOOM IN>,<ZOOM OUT>:
Push to adjust the map scale.
*8<MAP>:
Push to display the map. While follow-
ing a programmed route, push multi-
ple times to change the type of route
information displayed.
*9<BACK>:
Push to return to the previous screen.
In a settings screen, this button is also
used to apply the setting.
In a character input screen, this button
is also used to delete the characters
that have been entered.
*10<VOICE>:
Push to hear the current guidance for a
programmed route.
*11<SETTING>:
Push to access the system settings.
“8. Other settings”
INFO:
.
If <BACK> needs to be pushed to apply the
setting on a settings screen, this manual
will explicitly include a step for this
procedure. Otherwise, pushing <BACK>re- turns the display to the previous screen.
.The layout of the control panel switches may
vary depending on the vehicle model and
equipment.
CONTROL PANEL (Type B)
*1<DISP> (without Around View Monitor):
Push to access the display settings.
<CAMERA> (with Around View Moni-
tor):
Push to operate the Around View
Monitor.*2<DEST>:
Push to enter a destination. Various
methods for entering a destination are
available.
“4. Setting destination”
2. Getting started
2-3

2. Getting started
2-4
*3INFINITI controller:
Slide or rotate to highlight an item on
the screen, and push<ENTER>to select
the highlighted item.
On the map screen, turn to adjust the
map scale.
To scroll the map, slide the controller
in the direction you want to scroll.
“INFINITI controller” (page 2-6)
*4<INFO>:
Push to display the vehicle, traffic,
weather or voice recognition informa-
tion.
“7. Viewing technical informa-
tion”
*5<SETTING>:
Push to access the system settings.
“8. Other settings”
*6<ROUTE>:
Push to access the guidance control
functions (guidance cancellation, route
priority, waypoint setting on the route,
etc.).
“5. Route guidance”
*7<MAP>:
Push to display the map. While follow-
ing a programmed route, push multi- ple times to change the type of route
information displayed.
*8<BACK>:
Push to return to the previous screen.
In a settings screen, this button is also
used to apply the setting.
In a character input screen, this button
is also used to delete the characters
that have been entered.
*9<VOICE>:
Push to hear the current guidance for a
programmed route.
*10<STATUS>:
Push multiple times to display audio
information with either the air condi-
tioner status, fuel economy or naviga-
tion directions.
*11<DAY/NIGHT OFF>:
Push to switch between the day screen
(bright) and the night screen (dark).
Push and hold to turn off the display.
Push again to turn on the display.
INFO:
.
If <BACK> needs to be pushed to apply the
setting on a settings screen, this manual
will explicitly include a step for this
procedure. Otherwise, pushing <BACK>re-
turns the display to the previous screen.
.The layout of the control panel switches may
vary depending on the vehicle model and
equipment.

CONTROL PANEL (Type C)
*1<DEST>:
Push to enter a destination. Various
methods for entering a destination are
available.
“4. Setting destination”
*2INFINITI controller:
Slide or rotate to highlight an item on
the screen, and push<ENTER>to select
the highlighted item.
On the map screen, turn to adjust the
map scale. To scroll the map, slide the INFINITI
controller in the direction you want to
scroll.
“INFINITI controller”
(page 2-6)
*3<INFO>:
Push to display the vehicle, traffic,
weather or voice recognition informa-
tion.
“7. Viewing technical informa-
tion”
*4<SETTING>:
Push to access the system settings.
“8. Other settings”
*5<ROUTE>:
Push to access the guidance control
functions (guidance cancellation, route
priority, waypoint setting on the route,
etc.).
“5. Route guidance”
*6<MAP>:
Push to display the map. While follow-
ing a programmed route, push multi-
ple times to change the type of route
information displayed.
*7<BACK>:
Push to return to the previous screen.
In a settings screen, this button is also
used to apply the setting.
In a character input screen, this button
is also used to delete the characters
that have been entered.
*8<VOICE>:
Push to hear the current guidance for a
programmed route.
*9<STATUS>:
Push multiple times to display audio
information with either the air condi-
2. Getting started
2-5

NAVIGATION SYSTEM STATUS SCREEN
By pushing<STATUS>at any time, a split
screen with audio information that is
always at the top can be displayed.
Each time <STATUS>is pushed, the bottom
part of the screen changes between air
conditioner, fuel economy and navigation
directions.
INFO:
There are different status screens displayed
depending on various factors, such as the
currently active mode, whether a destination
has been set or not, etc.
When a route to the destination is set and the
audio system is on, a screen similar to the one above appears.
*1Turning direction at the next intersec-
tion
*2Name of the next street
*3Distance to the next intersection
*4Distance remaining to the destination
*5Remaining time to the destination
When a route to the destination is not set
and the audio system is off, a screen
similar to the one above appears.
2. Getting started
2-9

3. After the tone sounds and the icon onthe screen changes from []to[],
speak a command.
4. Continue to follow the voice menu prompts and speak after the tone
sounds until the operation is com-
pleted.
Operating tips
.Speak a command after the tone.
. Commands that are available are al-
ways shown on the display and spoken
through voice menu prompts. Com-
mands other than those that are dis-
played are not accepted. Please follow
the prompts given by the system.
. If the command is not recognized, the
system announces, “Please say again”.
Repeat the command in a clear voice.
. Push <BACK> once to return to the
previous screen.
. Push and hold <TALK
>to cancel the
command. The message, “Voice recog-
nition is canceled” will be announced.
. Push <TALK
>to stop the voice
prompt and give the command at once.
Remember to wait for the tone before speaking.
. To adjust the volume of the system
feedback, push the volume control
buttons <+>or<−> on the steering
wheel or use the audio system volume
control knob while the system is mak-
ing an announcement.
VOICE COMMAND EXAMPLES
To use the voice recognition system,
speaking one command is sometimes
sufficient, but at other times it is necessary
to speak two or more commands. As
examples, some additional basic opera-
tions that can be performed by voice
commands are described here.
Example 1: Placing call to phone number
800-662-6200
1. Push <TALK
>located on the steering
wheel.
2. The system announces, “Would you like
to access Phone, Navigation, Informa-
tion, Audio or Help?”.
3. Speak “Phone”.
4. Speak“Dial Number”.
5. Speak“800”.
2. Getting started
2-29

3. Map settings
3-2
MAP TYPES
Two types of map views are available: 2D
map and BirdviewTM(3D) map.
2D MAP
The 2D map displays the map in a 2-
dimensional environment similar to a road
map.
Screen information
*1Vehicle icon:
Indicates the current vehicle location
and the direction of travel.
*2Guide point:
Indicates a guide point on the route.
*3Remaining time and distance to
the destination:
Indicates the approximate remaining
time and distance to the destination or
waypoint. This indicator will appear
when a destination or waypoint is set
and route guidance is started.
When the vehicle is not driven on the
suggested route, the screen displays
the direction to the destination and the
distance to the destination from the
current vehicle position.
“Switching estimated arrival time
display” (page 5-29)
*4Suggested route:
Appears in bold yellow during route
guidance.
*5/Direction indicator:
Indicates the directional setting of the
map. Touch the icon to change the
setting.
: North always pointing up.

Push<ZOOM IN> or<ZOOM OUT>. A scale
appears on the right side of the screen.
To view the map in detail, push <ZOOM IN>.
To view a wider area, push <ZOOM OUT>.
The scale will automatically disappear
when neither <ZOOM IN>nor<ZOOM
OUT> has been pushed for several sec-
onds.
If the scaling operation is not performed
for a specified period of time, the scale
display disappears.
INFO:
Free zoom:
The scale can be changed in smaller steps when
<ZOOM IN> or<ZOOM OUT> is pushed and held
than when the button is pushed briefly. When
the button is pushed briefly, the scale can be
changed in large steps.
“Other navigation settings” (page 8-7)
OPERATING WITH CENTER DIAL
1. Turn the center dial when the map
screen is displayed. The map scale is
displayed at the right side of the
screen.
2. Use the center dial to adjust the map scale.
*1Clockwise: Zoom in
*2Counterclockwise: Zoom out
INFO:
Free zoom:
Depending on the setting, using the center dial
to change the map scale may adjust the scale
normally, or it may engage the free zoom (finer
scale adjustment in smaller steps).
“Other navigation settings” (page 8-7)
3. Map settings
3-9

Enlarged intersection view
When approaching a guide point, the
system automatically changes to the split
screen and shows an enlarged view of the
intersection on the left screen. After
passing through the intersection, the
system automatically returns to the full
screen mode. To switch to the full screen
mode while the enlarged intersection view
is displayed, push<MAP>. Pushing<MAP>
again displays the enlarged intersection
view.
Junction guidance
While driving on a freeway, when the
vehicle is approximately 1 mile (approxi-
mately 2 km) from a junction, the system
automatically switches to the split screen
and displays an enlarged view of the
junction (3D) on the left screen. After
passing the junction, the system automa-
tically returns to the full screen mode. To
switch to the full screen mode while the
enlarged junction view is displayed, push
<MAP>.
Turn list
Depending on the setting, the system can
constantly display the split screen and
show the turn list on the left screen. When
approaching a guide point, the left screen
automatically switches to an enlarged view
of the intersection. To switch to the full
screen mode, push <MAP>. Pushing<MAP>
again displays the turn list.
“Guidance screen settings” (page 5-9)
GUIDANCE SCREEN SETTINGS
The guidance screen can be displayed at
all times even when the vehicle is located
away from the guide point. Various types of
screens can be set.
5. Route guidance
5-9

5. Route guidance
5-10
Split screen settings
The display setting on the left-hand side
screen shown during route guidance can
be changed.
1. Push<ENTER>while the current location
map screen is displayed.
2. Highlight [Map View] and push <ENTER>.
3. Highlight [View Settings] and push
<ENTER>. 4. Highlight the preferred screen and
push <ENTER>. The indicator of the
selected screen illuminates.
Intersection:
The map screen and the enlarged intersec-
tion view can be displayed at the same
time.
Push <MAP> to switch to the full map
screen.
Turn list:
The list screen for showing the guide
points to the destination and the map
screen can be displayed at the same time.
An enlarged intersection view is automati-
cally displayed when the vehicle ap-
proaches the guide point.
The turn list can be scrolled using the
center dial, the main directional buttons,
the slide switch or by touching the up/
down button on the screen.
Push <MAP> to switch to the full map
screen. Push <MAP>again to display the
turn list.
Fuel Economy:
The current fuel consumption rate, average
fuel consumption rate, instantaneous con-
sumption rate and distance to empty can
be displayed on the map screen. An
enlarged intersection view is automatically
displayed when the vehicle approaches the
guide point.
Push <MAP> to switch to the full map
screen.
Push <MAP> again to display the fuel
economy screen. When approaching a
guide point, the enlarged view of the
intersection is automatically displayed. To

5. Route guidance
5-24
.If the system cannot calculate a detour with
the specified conditions, it displays the
previous suggested route.
.If the vehicle is traveling very fast, the
detour route may start from a location that
the vehicle has already passed.
SEARCHING FOR DETOUR ROUTE
TAKING TRAFFIC INFORMATION INTO
CONSIDERATION
When a serious traffic event occurs on the
route, or if the system finds a faster route,
a detour alert will pop up automatically. If
the automatic alert is not noticed, a detour
can also be manually searched.
1. Push<ROUTE>.
2. Highlight [Traffic Detour] and push
<ENTER>.
3. When the detour search is successful,detailed information about the detour
route (left screen) and the comparison
screen of the two routes (right screen)
are displayed.
*1Original route (yellow)
*2Detour route (pink)
*3The change of distance and esti-
mated travel time to destination
when the detour route is taken.
4. To accept the suggested detour route, highlight [Yes], and then push <ENTER>.
INFO:
.
If no route is set, or [Use Real Time Traffic
Information] is turned off, this function
cannot be operated.
.If a detour route is not selected and no
further action is performed, the detour route
will be automatically canceled.
.The detour suggestion can be retrieved even
after the message disappears by manually
selecting [Traffic Detour]. The system will
then search for the detour again and
suggests a detour if one is available at that
time.
.Without a subscription to a NavTraffic
broadcast, it will not be possible to get a
traffic detour or apply settings for functions
related to traffic information. A message
appears when a related menu item is
selected.
“Notes on NavTraffic information”
(page 10-14)
Automatic detour guidance
When [Auto Reroute] and [Use Real Time
Traffic Information] are turned on in the
detailed route settings, a message will
automatically pop up when the system
finds a detour.
“Detailed route settings” (page 5-26)