sensor JEEP CHEROKEE 1988 Service Repair Manual

and wiring for excessive resistance.
(3) - Some integral bearing assemblies with sensors may require
replacement.









\









\









\









\









\









\









\


DEFOGGERS
See
HEATING ELEMENTS (DEFROSTERS, DEFOGGERS, ELECTRIC HEATERS AND SEATS) .
DEFROSTERS
See
HEATING ELEMENTS (DEFROSTERS, DEFOGGERS, ELECTRIC HEATERS AND SEATS) .
DELAYS
DELAY INSPECTION








\









\









\









\









\









\









\


Condition Code Procedure
Attaching hardware
broken ................. A ... Require repair or replacement
of hardware.
Attaching hardware
missing ................ C .......... Require replacement of
hardware.
Attaching hardware not
functioning ............ A ... Require repair or replacement
of hardware.
Binding, affecting
performance ............ A .. Require repair or replacement.
Binding, not affecting
performance ............ 2 .. Suggest repair or replacement.
Broken .................. A .. Require repair or replacement.
Burned, affecting
performance ............ A ........... ( 1) Require repair or
replacement.
Burned, not affecting
performance ............ 2 ........... ( 1) Suggest repair or
replacement.
Cracked, affecting
performance ............ A .. Require repair or replacement.
Cracked, not affecting
performance ............ 1 .. Suggest repair or replacement.
Inoperative ............. A ........... ( 2) Require repair or
replacement.
Melted, affecting
performance ............ A ........... ( 1) Require repair or
replacement.
Melted, not affecting
performance ............ 2 ........... ( 1) Suggest repair or
replacement.
Missing ................. C ............ Require replacement.
Terminal broken ......... A .. Require repair or replacement.
Terminal burned, affecting
performance ............ A ........... ( 1) Require repair or
replacement.
Terminal burned, not
affecting performance .. 2 .. Suggest repair or replacement.
Terminal corroded,
affecting performance .. A .. Require repair or replacement.
Terminal corroded, not

SEAT HEATERS
See
HEATING ELEMENTS (DEFROSTERS, DEFOGGERS, ELECTRIC HEATERS AND SEATS) .
SECURITY ALARM SENSORS
SECURITY ALARM SENSOR INSPECTION








\









\









\









\









\









\









\


Condition Code Procedure
Attaching hardware
missing ................ C .......... Require replacement of
hardware.
Attaching hardware threads
damaged ................ A ... Require repair or replacement
of hardware.
Attaching hardware threads
stripped (threads
missing) ............... A ... Require repair or replacement
of hardware.
Connector broken ........ A .. Require repair or replacement.
Connector melted ........ A ........... ( 1) Require repair or
replacement.
Connector missing ....... C ............ Require replacement.
Inoperative ............. B ........... ( 2) Require repair or
replacement. Further
inspection required.
Missing ................. C ............ Require replacement.
Resistance out of
specification .......... B .. Require repair or replacement.
Terminal broken ......... A .. Require repair or replacement.
Terminal burned, affecting
performance ............ A ........... ( 1) Require repair or
replacement.
Terminal burned, not
affecting performance .. 2 .. Suggest repair or replacement.
Terminal corroded,
affecting performance .. A .. Require repair or replacement.
Terminal corroded, not
affecting performance .. 2 .. Suggest repair or replacement.
Terminal loose, affecting
performance ............ B .. Require repair or replacement.
Terminal loose, not
affecting performance .. 1 .. Suggest repair or replacement.
Threads damaged ......... A .. Require repair or replacement.
Threads stripped (threads
missing) ............... A ............ Require replacement.
Wire lead conductors
exposed ................ B .. Require repair or replacement.
Wire lead corroded ...... A .. Require repair or replacement.
Wire lead open .......... A .. Require repair or replacement.
Wire lead shorted ....... A .. Require repair or replacement.
( 1) - Determine cause and correct prior to repair or
replacement of part.
( 2) - Inoperative includes intermittent operation or out of OEM
specification.









\









\









\









\









\









\









\


SIRENS

(2) - Inoperative includes intermittent operation or out of OEM
specification.









\









\









\









\









\









\









\


TIRE PRESSURE SENSORS
TIRE PRESSURE SENSOR INSPECTION








\









\









\









\









\









\









\


Condition Code Procedure
Attaching hardware
broken ................. A ... Require repair or replacement
of hardware.
Attaching hardware
missing ................ C .......... Require replacement of
hardware.
Attaching hardware not
functioning ............ A ... Require repair or replacement
of hardware.
Inoperative ............. A ........... ( 1) Require repair or
replacement.
Loose ................... A .. Require repair or replacement.
Missing ................. C ............ Require replacement.
( 1) - Inoperative includes intermittent operation or out of OEM
specification.









\









\









\









\









\









\









\


TRANSCEIVERS
TRANSCEIVER INSPECTION








\









\









\









\









\









\









\


Condition Code Procedure
Attaching hardware
broken ................. A ... Require repair or replacement
of hardware.
Attaching hardware
missing ................ C .......... Require replacement of
hardware.
Attaching hardware not
functioning ............ A ... Require repair or replacement
of hardware.
Connector broken ........ A .. Require repair or replacement.
Connector melted ........ A ........... ( 1) Require repair or
replacement.
Connector missing ....... C ............ Require replacement.
Malfunctioning .......... A ........... ( 2) Require repair or
replacement.
Missing ................. C ............ Require replacement.
Sound quality poor ...... A ........... ( 3) Require repair or
replacement.
Terminal broken ......... A .. Require repair or replacement.
Terminal burned, affecting
performance ............ A ........... ( 1) Require repair or
replacement.
Terminal burned, not
affecting performance .. 2 .. Suggest repair or replacement.
Terminal corroded,
affecting performance .. A .. Require repair or replacement.
Terminal corroded, not
affecting performance .. 2 .. Suggest repair or replacement.
Terminal loose, affecting

EM IS SIO N A PPLIC ATIO N

1988 J e ep C hero ke e
1988 ENGINE EMISSIONS
Jeep Emission Control Applications
Cherokee, Comanche, Grand Wagoneer, Pickup,
Wagoneer, Wrangler
EMISSION CONTROL DEVICE APPLICATIONS
EMISSION CONTROL DEVICE APPLICATIONS TABLE








\









\









\









\









\









\









\


2.5L (150") 4-Cyl. TBI
PCV, EVAP, OC (3), EGR, SPK, CEC, O2
4.0L (242") 6-Cyl. MPFI
PCV, EVAP, AIS (2), DBC, EGR, SPK, CEC, O2, ACV, ASV
4.2L (258") 6-Cyl. 2-Bbl.
PCV, TAC, AIS, EVAP, DBC, EGR, SPK, CEC, O2, ACV, ASV,
EFE, EGR-CTO, EGR-TVS, MCU, SLV, VSA (1)
5.9L (360") V8 2-Bbl.
PCV, TAC, AIS, EVAP, DBC, EGR, SPK, ACV, DLV, EGR-CTO,
EGR-TVS, MCU (2), NLV, RDV, VA-CTO (2) (3), VSA (2)
(1) - Some Fed., all Calif.
(2) - Calif. only.
(3) - TWC on Calif.









\









\









\









\









\









\









\


ABBREVIATION DEFINITIONS
ABBREVIATIONS DEFINITIONS TABLE








\









\









\









\









\









\









\


Abbreviation Description
ACV ......................................... Air Control Valve
AIS ...................................... Air Injection System
ASV ....................................... Air Switching Valve
CEC ............................... Computerized Engine Control
DC-VLV ..................................... Deceleration Valve
DLV ............................................... Delay Valve
DVTRV .......................................... Diverter Valve
EGR ................................. Exhaust Gas Recirculation
EGR-CTO ...................... EGR Coolant Temperature Override
EGR-FDLV ............................... EGR Foward Delay Valve
EGR-TVS ............................. EGR Thermal Vacuum Switch
EST .................................. Electronic Spark Control
EVAP ................................... Evap. Emission Control
HDSP-CT ............... Heavy Duty Spark Coolant Temp. Override
HDVA-CTO ....... Heavy Duty Vac. Advance Coolant Temp. Override
MCU ....................................... Micro Computer Unit
MPS .................................. Manifold Pressure Sensor
NLRV .............................. Non-Linear Vacuum Regulator
OC ......................................... Oxidation Catalyst
O2 .............................................. Oxygen Sensor
PCV ............................ Positive Crankcase Ventilation
RDV ....................................... Reverse Delay Valve
S-CTO ............................ Spark Coolant Temp. Override
SLV ................................................... Solevac

SPK ..................................................... Spark
TAC .................................. Thermostatic Air Cleaner
TPS .................................. Throttle Position Sensor
TSD ......................................... Throttle Solenoid
TP ........................................ Throttle Positioner
TWC ........................................ Three-Way Catalyst
VA-CTO .................. Vacuum Advance Coolant Temp. Override
VSA .................................... Vacuum Switch Assembly
VTP ................................ Vacuum Throttle Positioner









\









\









\









\









\









\









\

EM IS SIO N C O M PO NEN T ID EN TIF IC ATIO N

1988 J e ep C hero ke e
1988 Exhaust Emission Systems
JEEP SYSTEMS
NOTE: Information not available from manufacturer for Jeep 2.5L
TBI and 4.0L MPFI emission systems.
DESCRIPTION
Several systems are used to control emissions. System usage
depends on model, engine and transmission combinations. Each system
is designed to control vehicle emissions. In addition, specially
calibrated carburetors (carbureted models), fuel injection system,
distributors and modified combustion chambers are used with these
systems.
AIR INJECTION
Air injection system consists of air pump, diverter valve,
check valve, and various air distribution lines necessary to inject
fresh air adjacent to exhaust valves. Injection of fresh air adjacent
to exhaust valves creates an afterburn which further consumes
unburned gases in engine's exhaust.
CATALYTIC CONVERTER (CAT)
Converter is installed in vehicle's exhaust system to aid in
reduction of exhaust emissions. This unit changes unburned
hydrocarbons (HC) and carbon monoxide (CO) into water vapor and
carbon dioxide.
COMPUTERIZED EMISSION CONTROL (CEC) SYSTEM
CEC system closely controls air/fuel ratio through a
feedback system from an oxygen sensor in exhaust system. Major
components of this system include exhaust gas oxygen sensor, vacuum
switches, temperature switches, Micro Computer Unit (MCU), fuel
injection system or computer controlled carburetor (carbureted
models) to maintain a constant air/fuel mixture. For additional
information, see appropriate article in COMPUTERIZED ENGINE CONTROL
section.
EVAPORATIVE EMISSION CONTROL
All models use closed tank (sealed) system, which returns
raw fuel vapors and routes them to intake manifold for burning.
Carbon canister stores vapors until engine draws them off for burning.
OTHER EMISSION SYSTEMS
For additional information on description, operation,
testing and adjusting other exhaust emission systems, refer to the
following articles in this section.

These 3 orifices are opened and closed by electric solenoids. The
solenoids are, in turn, controlled by the Electronic Control Module
(ECM). When a solenoid is energized, the armature with attached shaft
and swivel pintle is lifted, opening the orifice. See Fig. 11.
The ECM uses inputs from the Coolant Temperature Sensor
(CTS), Throttle Position Sensor (TPS) and Mass Airflow (MAF) senso\
rs
to control the EGR orifices to make 7 different combinations for
precise EGR flow control. At idle, the EGR valve allows a very small
amount of exhaust gas to enter the intake manifold. This EGR valve
normally operates above idle speed during warm engine operation.
Verify EGR valve is present and not modified or purposely
damaged. Ensure thermal vacuum switches, pressure transducers, speed
switches, etc., (if applicable) are not by-passed or modified. Ensure
vacuum hose(s) to EGR valve is not plugged. Ensure electrical
connector to EGR valve is not disconnected.
Fig. 11: Typical Digital EGR Valve
Courtesy of General Motors Corp.
Integrated Electronic EGR Valve
This type functions similar to a ported EGR valve with a

remote vacuum regulator. The internal solenoid is normally open, which
causes the vacuum signal to be vented off to the atmosphere when EGR
is not controlled by the Electronic Control Module (ECM). The solenoid\
valve opens and closes the vacuum signal, controlling the amount of
vacuum applied to the diaphragm. See Fig. 12.
The electronic EGR valve contains a voltage regulator, which
converts ECM signal and regulates current to the solenoid. The ECM
controls EGR flow with a pulse width modulated signal based on
airflow, TPS and RPM. This system also contains a pintle position
sensor, which works similarly to a TPS sensor. As EGR flow is
increased, the sensor output increases.
Verify EGR valve is present and not modified or purposely
damaged. Ensure thermal vacuum switches, pressure transducers, speed
switches, etc., (if applicable) are not by-passed or modified. Ensure
electrical connector to EGR valve is not disconnected.
Fig. 12: Cutaway View Of Typical Integrated Electronic EGR Valve
Courtesy of General Motors Corp.
SPARK CONTROLS (SPK)

Spark control systems are designed to ensure the air/fuel
mixture is ignited at the best possible moment to provide optimum
efficiency and power and cleaner emissions.
Ensure vacuum hoses to the distributor, carburetor, spark
delay valves, thermal vacuum switches, etc., are in place and routed
properly. On Computerized Engine Controls (CEC), check for presence of\
required sensors (O2, MAP, CTS, TPS, etc.). Ensure they have not been
tampered with or modified.
Check for visible modification or replacement of the feedback
carburetor, fuel injection unit or injector(s) with a non-feedback
carburetor or fuel injection system. Check for modified emission-
related components unacceptable for use on pollution-controlled
vehicles.
AIR INJECTION SYSTEM (AIS)
Air Pump Injection System (AP)
The air pump is a belt-driven vane type pump, mounted to
engine in combination with other accessories. The air pump itself
consists of the pump housing, an inner air cavity, a rotor and a vane
assembly. As the vanes turn in the housing, filtered air is drawn in
through the intake port and pushed out through the exhaust port. See
Fig. 13 .
Check for missing or disconnected belt, check valve(s),
diverter valve(s), air distribution manifolds, etc. Check air
injection system for proper hose routing.
Fig. 13: Typical Air Pump Injection System
Courtesy of General Motors Corp.
Pulsed Secondary Air Injection (PAIR) System
PAIR eliminates the need for an air pump and most of the
associated hardware. Most systems consists of air delivery pipe(s),
pulse valve(s) and check valve(s). The check valve prevents exhaust
gases from entering the air injection system. See Fig. 14.
Ensure required check valve(s), diverter valve(s), air
distribution manifolds, etc., are present. Check air injection system
for proper hose routing.

Fig. 14: Typical Pulsed Secondary Air Injection System
Courtesy of General Motors Corp.
OXYGEN SENSOR (O2)
The O2 sensor is mounted in the exhaust system where it
monitors oxygen content of exhaust gases. Some vehicles may use 2 O2
sensors. The O2 sensor produces a voltage signal which is proportional
to exhaust gas oxygen concentration (0-3%) compared to outside oxygen
(20-21%). This voltage signal is low (about .1 volt) when a lean
mixture is present and high (1.0 volt) when a rich mixture is present.\
As ECM compensates for a lean or rich condition, this voltage
signal constantly fluctuates between high and low, crossing a
reference voltage supplied by the ECM on the O2 signal line. This is
referred to as cross counts. A problem in the O2 sensor circuit should
set a related trouble code.
COMPUTERIZED ENGINE CONTROLS (CEC)
The CEC system monitors and controls a variety of
engine/vehicle functions. The CEC system is primarily an emission
control system designed to maintain a 14.7:1 air/fuel ratio under most
operating conditions. When the ideal air/fuel ratio is maintained, the
catalytic converter can control oxides of nitrogen (NOx), hydrocarbon
(HC) and carbon monoxide (CO) emissions.
The CEC system consists of the following sub-systems:
Electronic Control Module (ECM), input devices (sensors and switches)\
and output signals.