torque JEEP WRANGLER 4XE 2021 Owners Manual

Page 33 of 476


CAUTION!
Do not close the door before reattaching the
door check to the body. Damage may occur to
the door check.
Do not overtighten Torx fasteners, damage to
the vehicle’s parts will occur.
Hinge pins can break if overtightened during
door install (Max Torque: 6.0 ft· lb/8.1 N·myf.
1 — Seat Connector Straight Into Harness
2 — Wiring Harness Lever Starts To Lower
2

21_JL_OM_EN_USC_t.book Page 31

Page 113 of 476


WARNING!
Do not drive your vehicle on public roads with
the door frame(syfUHPRYHGDV\RXZLOOORVHWKH
protection that they can provide. This proce-
dure is furnished for use during off-road oper -
ation only.
Do not drive your vehicle on public roads with
the doors removed as you will lose the protec -
tion that they can provide. This procedure is
furnished for use during off-road operation
only.
Target Torque Specification For Torx
Fasteners Maximum Minimum
79.6 in-lb (9 N·myf 87.6 in-lb
(9.9 N·myf 71.7 in-lb
(8.1 N·myf
CAUTION!
Do not overtighten the screws. You can strip the
screws if they are overtightened.
2

21_JL_OM_EN_USC_t.book Page 111

Page 305 of 476

:$51,1*
In the ESC “Full Off” mode, the engine torque
reduction and stability features are disabled.
Therefore, enhanced vehicle stability offered
by the ESC system is unavailable. In an emer-
gency evasive maneuver, the ESC system will
not engage to assist in maintaining stability.
ESC “Full Off” mode is intended for
off-highway or off-road use only.
The Electronic Stability Control (ESCyfFDQQRW
prevent the natural laws of physics from
acting on the vehicle, nor can it increase the
traction afforded by prevailing road condi -
tions. ESC cannot prevent all accidents,
including those resulting from excessive
speed in turns, driving on very slippery
surfaces, or hydroplaning. ESC also cannot
prevent collisions.
6

21_JL_OM_EN_USC_t.book Page 303