engine KIA STONIC 2018 Owners Manual

RECOMMENDED LUBRICANTS AND CAPACITIES
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The cor‐
rect lubricants also help promote engine efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
LubricantVolumeClassification
Engine oil *1
*2
(drain and refill)
Recommends
Gasoline Engine 1.0L
3.6
l (3.8 US
qt.) ACEA A5/B5
1.2L 3.5
l (3.7 US
qt.) API service SM, ILSAC GF4 or above, ACEA A5/B5
*3
API SN, ACEA C2 *4
1.4L 3.6
l (3.8 US
qt.) API service SM, ILSAC GF4 or above, ACEAA5/B5
*3
API SN, ACEA C2 *4
Diesel En‐ gine 1.4L /
1.6L with
DPF *5 5.3
l (5.6 US
qt.) ACEA C2 or C3
Without DPF *5 5.3
l (5.6 US
qt.) ACEA C3 or C2 or A3/B4
Manual transaxle fluid Gasoline Engine 1.2L
1.5 ~ 1.6
l (1.4 ~
1.5 US qt.) API Service GL-4 SAE 70W
- HK SYN MTF 70W
- SPIRAX S6 GHME 70W MTF - GS MTF HD 70W
1.0L/
1.4L 1.6 ~ 1.7
l (1.5 ~
1.6 US qt.)
Diesel Engine 1.4L 1.7 ~ 1.8
l (1.6 ~
1.7 US qt.)
Automatic transaxlefluid Gasoline Engine 1.4L 6.8
l (7.2 US
qt.) ATF SP-III (Recommended DIAMOND, SK)


9-13
9
Specifications & Consumer information

LubricantVolumeClassification
Coolant Gasoline Engine1.0L
5.5
l (5.8 US
qt.)
Mixture of antifreeze and water (Ethylene glycolbase coolant for aluminum radiator)
1.2L
5.1
l (5.4 US
qt.)
1.4L MT
5.1
l (5.4 US
qt.)
AT 5.5
l (5.8 US
qt.)
Diesel En‐gine 1.4L/1.6L6.4
l (6.8 US
qt.)
Brake / clutch fluid 0.7 ~ 0.8
l (0.7 ~
0.8 US qt.) FMVSS116 DOT-3 or DOT-4
Fuel 45
l (11.9 US
gal.) -
*1
Refer to L

Recommended SAE viscosity number
CAUTION
Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant.This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug anddipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowabil‐
ity). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity en‐ gine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended
could result in engine damage.
When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart.

9-15
9
Specifications & Consumer information

ENGINE NUMBER
¥
(BTPMJOF
FOHJOF
-

¥
(BTPMJOF
FOHJOF
-

¥
(BTPMJOF
FOHJOF
-

06#-#
%JFTFM
FOHJOF
--

The engine number is stamped on the
engine block as shown in the drawing.
Specifications & Consumer information
9-20