engine KIA STONIC 2018 Owner's Guide

Page 127 of 523

INSTRUMENT CLUSTER
0:#0:#$
5ZQF"
5ZQF#
1. Tachometer
2. Speedometer
3. Engine coolant temperature gauge
4. Fuel gauge
5. Warning and indicator lights
6. LCD display
❈ The actual cluster in the vehicle
may differ from the illustration.
For more details, refer to L

Page 128 of 523

0:#0:#
5ZQF$
5ZQF%
1. Tachometer
2. Speedometer
3. Engine coolant temperature gauge
4. Fuel gauge
5. Warning and indicator lights
6. LCD display
❈ The actual cluster in the vehicle
may differ from the illustration.
For more details, refer to L

Page 131 of 523

Tachometer
¥5ZQF"
¥5ZQF#
The tachometer indicates the approxi‐
mate number of engine revolutions per minute (rpm). Use the tachometer to select the cor‐
rect shift points and to prevent lugging
and/or over-revving the engine.
CAUTION
Do not operate the engine within thetachometer's RED ZONE. This maycause severe engine damage.
Engine coolant temperature gauge
¥5ZQF" GPS&YDFQU&VSPQF

¥5ZQF# GPS&VSPQF


4-49
4
Features of your vehicle

Page 132 of 523

This gauge indicates the temperature
of the engine coolant when the ignition switch or Engine Start/Stop button is
ON.
CAUTION
If the gauge pointer moves beyondthe normal range area toward theL

Page 133 of 523

CAUTION
Avoid driving with an extremely lowfuel level. Running out of fuel couldcause the engine to misfire damag‐ing the catalytic converter.
Odometer
The odometer Indicates the total dis‐
tance that the vehicle has been driven and should be used to determine when
periodic maintenance should be per‐
formed.
- Odometer range: 0 ~ 1,599,999 km or
999,999 miles.
Outside Temperature Gauge
This gauge indicates the current out‐
side air temperatures by 1°C (1°F).
- Temperature range :
- Type A : - 40°C ~ 85°C (- 40°F ~
199°F)
- Type B : - 40°C ~ 85°C (- 40°F ~
211°F)
The outside temperature on the display
may not change immediately like a
general thermometer to prevent the driver from being inattentive.
To change the temperature unit (from
°C to °F or from °F to °C) • Type A,B Cluster
Press the TRIP button for 5 seconds
and more.
• Type C, D Cluster The temperature unit can be changed
by using the L

Page 136 of 523

To change the trip mode, press the
TRIP button. - For Type C, D cluster
LÜ5SJQNFUFS LÜ'VFM&DPOPNZLÜ5JNFS
"DDVNVMBUFE*OGP
LÜ5SJQNFUFS LÜ'VFM&DPOPNZLÜ5JNFS
%JHJUBMTQFFEPNFUFS
%SJWF*OGP
LÜ"WFSBHF'VFM&DPOPNZ LÜ*OTUBOU'VFM&DPOPNZ
53*1
To change the trip mode, scroll the
MOVE scroll switch (/) in the trip
computer mode.
Trip A/B (for Type A, B cluster)
Tripmeter (1)
• The tripmeter is the total driving dis‐ tance since the last tripmeter reset.- Distance range : 0 ~ 1599999 km or 0 ~ 999999 mi
• To reset the tripmeter, press the RE‐ SET button on the steering wheel formore than 1 second when the trip‐
meter is displayed.
Elapsed Time (2)
• The elapsed time is the total driving time since the last elapsed time re‐
set. - Time range (hh:mm) : 00:00 ~ 99:59
• To reset the elapsed time, press the RESET button on the steering wheelfor more than 1 second when the
elapsed time is displayed.
NOTICE
Even if the vehicle is not in motion,
the elapsed time keeps going while
the engine is running.
Average Vehicle Speed (3)
• The average vehicle speed is calcula‐ ted by the total driving distance and
driving time since the last average vehicle speed reset. - Speed range : 0 ~ 250 km/h or mph
• To reset the average vehicle speed, press the RESET button on the steer‐
ing wheel for more than 1 second
when the average vehicle speed is
displayed.
Features of your vehicle
4-54

Page 137 of 523

NOTICE
•The average vehicle speed is not
displayed if the driving distance is
less than 50 meters or the driving
time is less than 10 seconds since
the ignition switch is turned to ON.
•Even if the vehicle is not in motion,
the average vehicle speed keeps
going while the engine is running.
Fuel Economy
0:#$
5ZQF"
#DMVTUFS
0:#$
5ZQF$
%DMVTUFS
Distance To Empty (1)
• The distance to empty is the estima‐ ted distance the vehicle can be driven
with the remaining fuel. - Distance range: 1 ~ 9,999 km or 1 ~ 9,999 mi.
• If the estimated distance is below 1 km (1 mi.), the trip computer will
display "---" as distance to empty.
NOTICE
•If the vehicle is not on level ground
or the battery power has been in‐
terrupted, the distance to empty
function may not operate correct‐
ly.
•The distance to empty may differ
from the actual driving distance as
it is an estimate of the available
driving distance.
•The trip computer may not regis‐
ter additional fuel if less than
6 liters (1.6 gallons) of fuel are
added to the vehicle.
(Continued)

4-55
4
Features of your vehicle

Page 143 of 523

- After Ignition : The average fueleconomy will reset automatically
whenever it has passed 4 hours after turning OFF the engine.
- After Refueling : The average fuel economy will reset automatically
when refueling.

Fuel Economy Unit
To select the fuel economy unit.
(km/L ↔ L/100km, UK gallon ↔ US
gallon)

Temperature Unit
To select the temperature unit. (°C, °F)
Language
Choose the language
Reset
You can reset the menus in the User
Settings Mode. All menus in the User Settings Mode are initialized, except
language and service interval.
Warning messages
Warning messages appear on the LCD
to warn the driver. It is located in the center of the instrument cluster.
The warning message may appear dif‐
ferently depending on the type of in‐
strument cluster and some may not show the warning message at all. The warning message is shown in ei‐
ther symbol, symbol and text, or text
type only.
Door, hood, tailgate open
• This warning is displayed indicating which door, or the hood, or the tail‐
gate is open.
Sunroof open(if equipped)
• This warning is displayed if you turn off the engine when the sunroof is
open.
Engine has overheated
• This warning message illuminates
when the engine coolant temperature
is above 120°C (248°F). This means
that the engine is overheated and may be damaged.
❈ If your vehicle is overheated, refer
to L

Page 144 of 523

Shift to P (for smart key system
and automatic transaxle)
• This warning message illuminates ifyou try to turn off the engine with‐
out the shift lever in P (Park) position.
• At this time, the Engine Start/Stop Button turns to the ACC position (If
you press the Engine Start/Stop But‐
ton once more, it will turn to the ON position).
Low Key Battery (for smart key
system)
• This warning message illuminates if the battery of the smart key is dis‐
charged when the Engine Start/Stop Button changes to the OFF position.
Press START button while turning
wheel (for smart key system)
• This warning message illuminates if
the steering wheel does not unlock
normally when the Engine Start/Stop Button is pressed.
• It means that you should press the Engine Start/Stop Button while turn‐
ing the steering wheel right and left.
Steering wheel unlocked (for smart
key system)
• This warning message illuminates if the steering wheel does not lockwhen the Engine Start/Stop Button
changes to the OFF position.
Check Steering Wheel Lock System
(for smart key system)
• This warning message illuminates if the steering wheel does not lock nor‐
mally when the Engine Start/Stop Button changes to the OFF position.
Press brake pedal to start engine
(for smart key system and
automatic transaxle)
• This warning message illuminates if the Engine Start/Stop Button
changes to the ACC position twice by pressing the button repeatedly with‐
out depressing the brake pedal.
• It means that you should depress the brake pedal to start the engine.
Press clutch pedal to start engine
(for smart key system and manual
transaxle)
• This warning message illuminates if the Engine Start/Stop Button
changes to the ACC position twice by
pressing the button repeatedly with‐ out depressing the clutch pedal.
• It means that you should depress the clutch pedal to start the engine.
Key not in vehicle (for smart key
system)
• This warning message illuminates ifthe smart key is not in the vehicle
when you press the Engine Start/ Stop Button.
• It means that you should always have the smart key with you.
Key not detected (for smart key
system)
• This warning message illuminates if
the smart key is not detected when
you press the Engine Start/Stop But‐ ton.
Features of your vehicle
4-62

Page 145 of 523

Press START button again (for
smart key system)
• This warning message illuminates ifyou can not operate the EngineStart/Stop Button when there is a
problem with the Engine Start/Stop
Button system.
• It means that you could start the en‐ gine by pressing the Engine Start/
Stop Button once more.
• If the warning illuminates each time you press the Engine Start/Stop But‐
ton, have the vehicle inspected by a
professional workshop. Kia recom‐
mends to visit an authorized Kia deal‐
er/service partner.
Press START button with key (for
smart key system)
• This warning message illuminates if you press the Engine Start/Stop But‐
ton while the warning message L

Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 61-70 71-80 ... 200 next >