Lexus IS200t 2017 Navigation Manual

121
3. ROUTE GUIDANCE
IS_NAVI_EE
NAVIGATION SYSTEM
3
1Display the “Route” screen. (→P.120)
2Select “Delete” .
3Select “Yes” when the confirmation
screen appears.
z When more than 1 destination is set, a list
will be displayed on the screen.
“Delete all” : Select to delete all destinations
on the list.
z If more than 1 destination has been set, the
system will recalculate the route(s) to the
set destination(s) as necessary.
1Display the “Route” screen. ( →P.120)
2Select “Search condition” .
3Select the desired type and select “OK”.
1Display the “Route” screen. ( →P.120)
2Select “Detour” .
3Select the desired detour distance.
DELETING DESTINATIONS
SETTING SEARCH
CONDITION
Road conditions of the route to the des-
tination can be set.
DETOUR SETTING
During the route guidance, the route
can be changed to detour around a sec-
tion of the route where a delay is caused
by road repairs, an accident, etc.
No.Function
Select to detour within 1 mile of the
current position.
Select to detour within 3 miles of the
current position.
Select to detour within 5 miles of the
current position.
Select to detour on the entire route.
Select to make the system search for
the route based on the traffic con-
gestion information received from
traffic information. ( →P.93)

122
3. ROUTE GUIDANCE
IS_NAVI_EE
1Display the “Route” screen. (→P.120)
2Select “Road preferences” .
3Select the desired road preferences
and select “OK”.
zWhen set to on, the indicator will illuminate.
INFORMATION
●
This picture shows an example of how the
system would guide around a delay
caused by a traffic jam. This position indicates the location of a
traffic jam caused by road repairs, an ac-
cident, etc.
This route indicates the detour suggest-
ed by the system.
●When the vehicle is on a motorway, the
detour distance selections are 5, 15 and
25 miles (or 5, 15 and 25 km if units are
in km).
●The system may not be able to calculate a
detour route depending on the selected
distance and surrounding road condi-
tions.
ROAD PREFERENCE
The conditions to determine the route
can be selected from various choices
such as motorway, toll roads, etc.

123
3. ROUTE GUIDANCE
IS_NAVI_EE
NAVIGATION SYSTEM
31Display the “Route” screen. (→P.120)
2Select “Route overview” .
3Check that the entire route map is dis-
played.
■TURN LIST
1Select “Turn list” .
2 Check that the turn list is displayed.
ROUTE OVERVIEW
The entire route from the current posi-
tion to the destination can be viewed
during route guidance.
No.FunctionPage
Select to display a list of the
turns required to reach the
destination.123
Select to change the route.120
Select to start guidance.
The turn list on the guidance route can
be viewed.
No.Information
Current position
Distance to the next turn
Turn direction at the intersection
Select to display the map of the se-
lected point.
INFORMATION
●
However, not all road names in the route
may appear on the list. If a road changes
its name without requiring a turn (such as
on a street that runs through 2 or more
towns), the name change will not appear
on the list. The street names will be dis-
played in order from the starting point,
along with the distance to the next turn.

124
IS_NAVI_EE
4. MY MEMORY
1. MY MEMORY SETTINGS
1Select “Menu” on the map screen.
( → P.80)
2Select “My memory” .
3Select the desired items to be set.
1Display the “My memory” screen.
(→ P.124)
2Select “Home” .
3Select the desired item.
Points or areas on the map screen can
be registered.
The registered points can be used on the
“Destination” screen. ( →P.98)
Registered areas to avoid, will be avoid-
ed when the system searches for a route.
No.FunctionPage
Select to set home.124
Select to set the memory
points.128
Select to set quick access.126
Select to set areas to avoid.132
Select to set route traces.134
Select to copy from a USB
memory.137
Select to backup to a USB
memory.135
SETTING UP HOME
If a home has been registered, that infor-
mation can be recalled by selecting
“Home” on the “Destination” screen.
( → P.100)
No.FunctionPage
Select to register home.125
Select to edit home.125
Select to delete home.125

125
4. MY MEMORY
IS_NAVI_EE
NAVIGATION SYSTEM
3
1Select “Register” .
2Select the desired item to search for the
location. (→P.98)
3Select “OK” when the editing home
screen appears. ( →P.125)
1Select “Edit”.
2Select the desired item to be edited.
3Select “OK”.
1Select “Delete” .
2Select “Yes” when the confirmation
screen appears.
REGISTERING HOMEEDITING HOME
No.FunctionPage
Select to change the icon to
be displayed on the map
screen.129
Select to edit the home
name.130
Select to display the home
name on the map screen.
When set to on, the indica-
tor will illuminate.

Select to edit location infor-
mation.130
Select to edit the telephone
number.130
DELETING HOME

126
4. MY MEMORY
IS_NAVI_EE
1Display the “My memory” screen.
(→ P.124)
2Select “Quick access” .
3Select the desired item.
1Select “Register” .
2Select the desired item to search for the
location. (→P.98)
3Select a position for this quick access.
4Select “OK” when the editing quick ac-
cess screen appears. ( →P.127)
SETTING UP QUICK ACCESS
If quick access has been registered, that
information can be recalled by using the
quick access screen buttons on the
“Destination” screen. ( →P.100)
No.FunctionPage
Select to register quick ac-
cess.126
Select to edit quick access.127
Select to delete quick ac-
cess.127
REGISTERING QUICK
ACCESS
INFORMATION
●
Up to 5 preset destinations can be regis-
tered.

127
4. MY MEMORY
IS_NAVI_EE
NAVIGATION SYSTEM
3
1Select “Edit”.
2Select the desired quick access.
3Select the desired item to be edited.
4Select “OK”.
1Select “Delete” .
2Select the quick access to be deleted
and select “Delete”.
3Select “Yes” when the confirmation
screen appears.
EDITING QUICK ACCESS
No.FunctionPage
Select to change the icon to
be displayed on the map
screen.129
Select to edit the quick ac-
cess name.130
Select to display the quick
access name on the map
screen.
When set to on, the indica-
tor will illuminate.

Select to edit location infor-
mation.130
Select to edit the telephone
number.130
DELETING QUICK ACCESS

128
4. MY MEMORY
IS_NAVI_EE
1Display the “My memory” screen.
(→ P.124)
2Select “Memory points” .
3Select the desired item.
1Select “Register” .
2Select the desired item to search for the
location. (→P.98)
3Select “OK” when the editing memory
point screen appears. ( →P.129)
SETTING UP MEMORY
POINTS
Points or areas on the map screen can
be registered.
No.FunctionPage
Select to register memory
points.128
Select to edit memory
points.129
Select to delete memory
points.130
Select to edit or delete
stored routes.131
Select to register external
points.306
REGISTERING MEMORY
POINTS
INFORMATION
●
Up to 500 memory points can be regis-
tered.
●When registering establishments that
were set as destinat ions using an online
search, select “Previous”.

129
4. MY MEMORY
IS_NAVI_EE
NAVIGATION SYSTEM
31Select “Edit”.
2Select the desired memory point.
3Select the desired item to be edited.
4Select “OK”.
■CHANGING THE MARK
1Select “Mark” .
2Select the desired icon.
zChange pages by selecting the “Page 1”,
“Page 2” or “With sound” tab.
“With sound” : Select the memory points
with a sound.
X When “With sound” is selected
1Select the “With sound” tab.
2Select the desired sound icon.
: Select to play the sound.
zWhen “Bell (with direction)” is selected,
select an arrow to adjust the direction and
select “OK”.
EDITING MEMORY POINTS
The icon, name, location, telephone
number and/or group of a registered
memory point can be edited.
No.FunctionPage
Select to change the icon to
be displayed on the map
screen.129
Select to edit the memory
point name.130
Select to display the memo-
ry point name on the map
screen.
When set to on, the indica-
tor will illuminate.

Select to edit location infor-
mation.130
Select to edit the telephone
number.130
Select to register group.130
A sound for some memory points can be
set. When the vehicle approaches the
location of the memory point, the select-
ed sound will be heard.
INFORMATION
●
The bell sounds only when the vehicle
approaches this point in the direction that
has been set.

130
4. MY MEMORY
IS_NAVI_EE
■CHANGING THE NAME
1Select “Name” .
2Enter the desired name and select
“OK”.
■CHANGING THE LOCATION
1Select “Location” .
2Scroll the map to the desired point
(→ P.88) and select “OK”.
■CHANGING TELEPHONE NUM-
BER
1Select “Tel. no.” .
2Enter the number and select “OK”.
■SETTING THE GROUP
1Select “Group” .
2Select the group the memory point is to
be registered with. X
To register a new group
1Select “New group” .
2Enter the group name and select “OK”.
X To edit group name
1Select the group to be edited.
2Select “Edit name” .
3Enter the group name and select “OK”.
X To delete group
1Select “Delete group” .
2Select the group to be deleted and se-
lect “delete” .
3Select “Yes” when the confirmation
screen appears.
1Select “Delete” .
2Select the memory point to be deleted
and select “Delete”.
3Select “Yes” when the confirmation
screen appears.
Memory point groups can be set and
changed.DELETING MEMORY POINTS