engine lexus LC500 2018 Owner's Manual

Page 412 of 528

412
-$@-$I@0.@0.&@ &&

8-1. Specifications
*: If unleaded gasoline with an octane rating of 98 RON is not available, unleaded gasoline
with an octane rating of 95 RON may be used with no detriment to engine durability or
driveability.
Bore and stroke94.0  83.0 mm (3.7  3.3 in.)
Displacement3456 cm3 (210.9 cu.in.)
Drive belt tensionAutomatic adjustment
Fuel
Fuel type
When you find these types of fuel label at the
gas station, use only the fuel with one of the fol-
lowing labels.

EU area:
Unleaded gasoline conforming to European
standard EN228 only
Except EU area:
Unleaded gasoline only
Research Octane NumberLC50098 or higher*
LC500h95 or higher
Fuel tank capacity (Reference)82 L (21.7 gal., 18.0 Imp.gal.)
Electric motor (traction motor) (LC500h)
TypePermanent magnet synchronous motor
Maximum output131.9 kW
Maximum torque300 N•m (30.6 kgf•m, 221.3 ft•lbf)
Hybrid battery (traction battery) (LC500h)
TypeLithium-ion battery
Voltage3.7 V/cell

Page 413 of 528

413
8
-$@-$I@0.@0.&@ &&

8-1. Specifications
Vehicle specifications
LC500
■Oil capacity (Drain and refill [Ref-
erence*])
*: The engine oil capacity is a reference
quantity to be used when changing the
engine oil. Warm up and turn off the
engine, wait more than 5 minutes, and
check the oil level on the dipstick.
■Engine oil selection
“Toyota Genuine Motor Oil” is used in
your Lexus vehicle. Lexus recom-
mends the use of approved “Toyota
Genuine Motor Oil”. Another motor
oil of matching quality can also be
used.
Oil grade:
5W-30 and 10W-30:
API grade SL “Energy-Conserving”,
SM “Energy-Conserving” or SN
“Resource-Conserving”; or ILSAC
multigrade engine oil
15W-40:
API grade SL, SM or SN multigrade
engine oil
Recommended viscosity (SAE):
SAE 5W-30 is filled into your Lexus
vehicle at manufacturing, and the best
choice for good fuel economy and
good starting in cold weather.
If you use SAE 10W-30 or a higher vis-
cosity engine oil in extremely low tem-
peratures, the engine may become
difficult to start, so SAE 5W-30 engine
oil is recommended.
Temperature range anticipated
before next oil change.
Preferred
Oil viscosity (5W-30 is explained here
as an example):
• The 5W in 5W-30 indicates the
characteristic of the oil which allows
cold startability. Oils with a lower
value before the W allow for easier
starting of the engine in cold
weather.
• The 30 in 5W-30 indicates the vis-
cosity characteristic of the oil when
the oil is at high temperature. An oil
with a higher viscosity (one with a
Capacity3.6 Ah
Quantity84 cells
Overall voltage310.8 V
Lubrication system
With filter8.6 L (9.1 qt., 7.6 Imp.qt.)
Without filter7.9 L (8.4 qt., 7.0 Imp.qt.)
A
B

Page 414 of 528

414
-$@-$I@0.@0.&@ &&

8-1. Specifications
higher value) may be better suited if
the vehicle is operated at high
speeds, or under extreme load con-
ditions.
How to read oil container labels:
Either or both API registered marks
are added to some oil containers to
help you select the oil you should use.
API Service Symbol
Top portion: “API SERVICE SN” means the
oil quality designation by American Petro-
leum Institute (API).
Center portion: “SAE 5W-30” means the
SAE viscosity grade.
Lower portion: “Resource-Conserving”
means that the oil has fuel-saving and envi-
ronmental protection capabilities.
ILSAC Certification Mark
The International Lubr icant Specification
Advisory Committee (ILSAC) Certifica-
tion Mark is displayed on the front of the
container.
LC500h
■Oil capacity (Drain and refill [Ref-
erence*])
*: The engine oil capacity is a reference
quantity to be used when changing the
engine oil. Warm up the engine and turn
off the hybrid system, wait more than 5
minutes, and check the oil level on the
dipstick.
■Engine oil selection
“Toyota Genuine Motor Oil” is used in
your Lexus vehicle. Lexus recom-
mends the use of approved “Toyota
Genuine Motor Oil”. Another motor
oil of matching quality can also be
used.
Oil grade:
0W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”,
SM “Energy-Conserving” or SN
“Resource-Conserving”; or ILSAC
multigrade engine oil
15W-40:
API grade SL, SM or SN multigrade
engine oil
Recommended viscosity (SAE):
SAE 0W-20 is filled into your Lexus
vehicle at manufacturing, and the best
choice for good fuel economy and
good starting in cold weather.
If SAE 0W-20 oil is not available, SAE
5W-30 oil may be used. However, it
should be replaced with SAE 0W-20
at the next oil change.
If you use SAE 10W-30 or a higher vis-
cosity engine oil in extremely low tem-
peratures, the engine may become
difficult to start, so SAE 0W-20 or
5W-30 engine oil is recommended.With filter5.7 L (6.0 qt., 5.0 Imp.qt.)
Without filter5.5 L (5.8 qt., 4.8 Imp.qt.)
A
B

Page 415 of 528

415
8
-$@-$I@0.@0.&@ &&

8-1. Specifications
Vehicle specifications
Temperature range anticipated
before next oil change.
Preferred
Oil viscosity (0W-20 is explained here
as an example):
• The 0W in 0W-20 indicates the
characteristic of the oil which allows
cold startability. Oils with a lower
value before the W allow for easier
starting of the engine in cold
weather.
• The 20 in 0W-20 indicates the vis-
cosity characteristic of the oil when
the oil is at high temperature. An oil
with a higher viscosity (one with a
higher value) may be better suited if
the vehicle is operated at high
speeds, or under extreme load con-
ditions.
How to read oil container labels:
Either or both API registered marks
are added to some oil containers to
help you select the oil you should use.
API Service Symbol
Top portion: “API SERVICE SN” means the
oil quality designation by American Petro-
leum Institute (API).
Center portion: “SAE 0W-20” means the
SAE viscosity grade.
Lower portion: “Resource-Conserving”
means that the oil has fuel-saving and envi-
ronmental protection capabilities.
ILSAC Certification Mark
The International Lubricant Specification
Advisory Committee (ILSAC) Certifica-
tion Mark is displayed on the front of the
container.
A
B
A
B

Page 416 of 528

416
-$@-$I@0.@0.&@ &&

8-1. Specifications
*: The fluid capacity is a reference quantity.
If replacement is necessary, contact any auth orized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
■Spark plug
■12-volt battery
Cooling system
Capacity*
LC50012.1 L (12.8 qt., 10.6 Imp.qt.)
LC500h
Gasoline engine
10.9 L (11.5 qt., 9.6 Imp.qt.)
Power control unit
2.3 L (2.4 qt., 2.0 Imp.qt.)
Coolant type
Use either of the following:
• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-based non-sili-
cate, non-amine, non-nitrite, and non-borate coolant
with long-life hybrid organic acid technology
Do not use plain water alone.
Ignition system
LC500LC500h
MakeDENSO FK20HBR-J8DENSO FK20HBR8
Gap0.8 mm (0.031 in.)0.8 mm (0.031 in.)
NOTICE
■Iridium-tipped spark plugs
Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.
Electrical system
Specific gravity reading at 20°C
(68°F):1.250 or higher

Page 418 of 528

418
-$@-$I@0.@0.&@ &&

8-1. Specifications
*: Your Lexus vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory.
Use Lexus approved “Toyota Genuine Differentia l Gear Oil” or an equivalent of match-
ing quality to satisfy the above specification. Please contact any authorized Lexus retailer
or Lexus authorized repairer, or any reliable repairer for further details.
*1: Minimum pedal clearance when depressed with a force of 500 N (51.0 kgf, 112.4 lbf)
while the engine is running <h ybrid system is operating>.
When performing the brake pedal inspection, also be sure to check that the brake sys-
tem warning light is not illuminated when the en gine is running <hybrid system is operat-
ing>. (If the brake system warning light is illuminated, refer to P.368)
*2: Make sure to confirm that the brake system wa rning light (yellow) does not illuminate. (If
the brake system warning ligh t illuminates, refer to P.373)
Differential
Oil capacity0.85 L (0.90 qt., 0.75 Imp. qt.)
Oil type and viscosity
Without LSD (Limited Slip Differential)
Toyota Genuine Differential gear oil LT 75W-85 GL-
5 or equivalent*
With LSD (Limited Slip Differential)
Toyota Genuine Differential gear oil LX 75W-85 GL-
5 or equivalent*
Brakes
Pedal clearance*1132 mm (5.2 in.) Min.
Pedal free play1.0 - 6.0 mm (0.04 - 0.24 in.)
Brake pad wear limit1.0 mm (0.04 in.)
Parking brake indicator*2
When pushing the parking br ake switch for 1 to 4 sec-
onds: comes on
When pulling the pa rking brake switch for 1 to 4 sec-
onds: turns off
Fluid typeSAE J1703 or FMVSS No. 116 DOT 3,
SAE J1704 or FMVSS No. 116 DOT 4
Steering
Free playLess than 30 mm (1.2 in.)

Page 421 of 528

421
8
-$@-$I@0.@0.&@ &&

8-1. Specifications
Vehicle specifications
■Use of ethanol blended gasoline in a gasoline engine
Lexus allows the use of ethanol blended gasoline where the ethanol content is up to 10%. Make sure that the ethanol blended
gasoline to be used has a Research Octane Number that follows the above.
■If your engine knocks
●Consult any authorized Lexus retailer or Lexus authorized repairer, or any reliable repairer.
●You may occasionally notice light knock-ing for a short time while accelerating or
driving uphill. This is normal and there is no need for concern.
Fuel information
When you find these types of fuel
label at the gas station, use only the
fuel with one of the following labels.

LC500 (EU area):
You must only use unleaded gaso-
line conforming to European stan-
dard EN228.
Select unleaded gasoline with a
Researc h Octane Number of 98 or
higher for optimum engine perfor-
mance.
LC500 (Except EU area):
You must only use unleaded gaso-
line.
Select unleaded gasoline with a
Researc h Octane Number of 98 or
higher for optimum engine perfor-
mance.
LC500h (EU area):
You must only use unleaded gaso-
line conforming to European stan-
dard EN228.
Select unleaded gasoline with a
Research Octane Number of 95 or
higher for optimum engine perfor-
mance.
LC500h (except EU area):
You must only use unleaded gaso-
line.
Select unleaded gasoline with a
Research Octane Number of 95 or
higher for optimum engine perfor-
mance.
NOTICE
■Notice on fuel quality
●Do not use improper fuels. If improper fuels are used, the engine will be dam-
aged.
●Do not use leaded gasoline. Leaded gasoline will cause the three-
way catalytic converter to lose its effectiveness and the emission control system to function improperly.
●EU area: Bioethanol fuel sold under
names such as “E50” or “E85” and fuel containing a large amount of etha-nol should not be used. The use of
these fuels will damage the vehicle’s fuel system. In case of any doubt, ask any authorized Lexus retailer or Lexus
authorized repairer, or any reliable repairer.

Page 422 of 528

422
-$@-$I@0.@0.&@ &&

8-1. Specifications
NOTICE
●Except EU area: Bioethanol fuel sold under names such as “E50” or “E85” and fuel containing a large amount of
ethanol should not be used. Your vehi- cle can use gasoline mixed with 10% max ethanol. The use of fuel with more
than 10% ethanol content (E10) will damage the vehicle’s fuel system. You must ensure that refueling is carried
out only from a source where fuel specification and quality can be guar-anteed. In case of any doubt, ask any
authorized Lexus retailer or Lexus authorized repairer, or any reliable repairer.
●Do not use the methanol blended gas-
oline such as M15, M85, M100. The use of gasoline containing methanol may cause engine damage or failure.

Page 423 of 528

423
8
-$@-$I@0.@0.&@ &&

8-2. Customization
Vehicle specifications
8-2.C usto miz ation
■Changing by using the meter con-
trol switches
1 Press or of the meter con-
trol switches, select .
2 Press or of the meter con-
trol switches, select the item, and
press “OK”.
3 Press or of the meter con-
trol switches, select the desired set-
ting, and press “OK”.
To go back to the previous screen or
exit the customize mode, press .
■Changing by using the Remote
Touch
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup” on the menu screen
and select “Vehicle”.
3 Select “Vehicle customisation”,
“LEXUS park assist” or “Drive
mode customisation”.
Various setting can be changed. Refer
to the list of settings that can be
changed for details.
For details on the Remote Touch, refer
to the “NAVIGATION SYSTEM
OWNER’S MANUAL”.
■When customizing using the Remote
Touch
Stop the vehicle in a safe place, apply the
parking brake, and shift the shift position to P. Also, to prevent 12-volt battery discharge,
leave the engine running <hybrid system operating> while cust omizing the features.
Some function settings are changed simultaneously with other functions being cus-
Customizable features
Your vehicle includes a variety of
electronic features that can be per-
sonalized to your preferences. The
settings of these features can be
changed by using the meter control
switches, the Remote Touch or at
any authorized Lexus retailer or
Lexus authorized repairer, or any
reliable repairer.
Customizing vehicle features
WARNING
■During customization
As the engine <hybrid system> needs to be running <operating> during customi-
zation, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust
gases including harmful carbon monox- ide (CO) may collect and enter the vehi-cle. This may lead to death or a serious
health hazard.
NOTICE
■During customization
To prevent 12-volt battery discharge,
ensure that the engine is running <hybrid system is operating> while customizing features.
Customizable features

Page 431 of 528

431
8
-$@-$I@0.@0.&@ &&

8-2. Customization
Vehicle specifications
■Outside rear view mirrors (P.147)
■Power windows (P.150)
■Turn signal lever (P.186)
■Automatic light control system (P.191)
FunctionDefault settingCustomized setting
Automatic mirror folding and
extending operation
Linked to the
locking/unlock-
ing of the doors
Off
——OLinked to operation
of the engine switch
<power switch>
Linked mirror function when
reversingOnOff——O
FunctionDefault settingCustomized setting
Mechanical key linked operationOffOn——O
Wireless remote control linked
operationOffOn——O
Wireless remote control linked
operation signal (buzzer)OnOff——O
FunctionDefault settingCustomized setting
The number of times the turn signal
lights flash automatically when the
turn signal lever is moved to the
first position during a lane change
3
5
——O7
Off
FunctionDefault settingCustomized setting
Light sensor sensitivityStandard-2 to 2O—O
Follow me home
(Time elapsed before headlights
automatically turn off)
30 seconds
60 seconds
——O90 seconds
120 seconds
ABC
ABC
ABC
ABC

Page:   < prev 1-10 ... 141-150 151-160 161-170 171-180 181-190 191-200 201-210 next >