MAZDA MODEL CX-5 2015 Quick Guide (in English)

Page 1 of 29

1
2
5
24
25
Quick Guide Quick Guide
This Quick Guide is provided as a simple explanation of how to operate some of the
features equipped on your CX-5.
Essential Safety Equipment
Before Driving
When Driving
Interior Features
Maintenance and Care
The meaning for each of the symbols used in the Quick Guide is as follows:
Detailed explanation pertaining to some information.
26If Trouble Arises
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

Page 2 of 29

1
Essential Safety Equipment
To raise a head restraint, pull it up to the desired position.
Head Restraints Seat Operation
The following seat adjustment functions for the manual and power seats are
available.
Seat Slide
Height Adjustment
For details, refer to Section 2, “Seats”.
Seat Recline
Front Height
Adjustment of Seat
Bottom (Driver's Seat)
Lumbar Support
Adjustment (Driver's
Seat)
To lower the head restraint, press the stop-catch release, then push the head
restraint down.
Adjust the head restraint so that the centre is even with the top of the passenger's
ears.
Power operation
Dial type
Lever type
Front outboard seat Rear outboard seat Rear centre seat
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

Page 3 of 29

Request switch
Before Driving
Operational Range
The advanced keyless system operates only when the driver is in the vehicle or
within operational range while the key is being carried.
All doors and the liftgate can be locked/unlocked by pressing the request switch
on the front doors while the key is being carried.
Locking, Unlocking with Request Switch
Steering Wheel Adjustment
1. Stop the vehicle, and then pull down the lock
release lever under the steering column.
3. Attempt to push the steering wheel up and down
to make sure it's locked before driving. 2. Tilt the steering wheel and/or adjust the steering
column length to the desired positions, and then
push the lever up to lock the column.
2
Front doors (Lock/Unlock) Liftgate (Lock only)
For details, refer to Section 3, “Advanced Keyless Entry and Start System”,
“Doors and Locks” or “Steering Wheel”.
The request switch on the liftgate can only be used to lock all doors and the
liftgate.
Exterior aerial
Locking only
Operational range 80cm (31in) 80cm (31in)
Request switch
Lock release lever
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

Page 4 of 29

3
Before Driving
ON/OFF button
Indicator light
Close
Open
Outside Mirrors
1. Rotate the mirror switch to the left or
right to choose the left or right side
mirror.
2. Press the mirror switch in the
appropriate direction.
For details, refer to Section 3, “Mirrors” or “Windows”.
Rearview Mirror
Auto-dimming mirror
The auto-dimming mirror automatically reduces
glare of headlights from cars at the rear when the
ignition is switched ON.
Press the ON/OFF button to cancel the automatic
dimming function. The indicator light will turn off.
To reactivate the automatic dimming function, press the
ON/OFF button. The indicator light will illuminate.
Operation of the Power Windows
Each passenger window can also be operated using the master control switches on
the driver's door.
To open the window to the desired position, lightly hold down the switch.
To close the window to the desired position, lightly pull up the switch.
Mirror switch
Centre position
Master control switches
Right rear window Left rear window
Front passenger's windowDriver's window
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

Page 5 of 29

4
Before Driving
Open
Close
Fuel Requirements and Capacities
Fuel-Filler Flap
To open, pull the remote fuel-filler flap
release.
For details, refer to Section 3, “Fuel and Emission”.
Fuel-Filler Flap and Cap
Fuel-Filler Cap
To remove the fuel-filler cap, turn it anticlockwise.
Attach the removed cap to the inner side of the
fuel flap.
To close the fuel-filler cap, turn it clockwise
until a click is heard.Premium unleaded fuel
(Conforming to EN 228
and within E10)
*1
*1 EuropeFuel
Research Octane
Number Capacity
95 or above 2WD: 56.0 L (14.8 US gal,
12.3 Imp gal) SKYACTIV-G 2.0, SKYACTIV-G 2.5
Your Mazda will operate efficiently on diesel
fuel with specification EN590 or the equivalent.
When refuelling, always add at least 10 L (2.6 US gal, 2.2 Imp gal) of fuel.Fuel
Capacity
2WD: 56.0 L (14.8 US gal,
12.3 Imp gal) SKYACTIV-D 2.2Regular unleaded fuel
90 or above 92 or above
4WD: 58.0 L (15.3 US gal,
12.8 Imp gal) 4WD: 58.0 L (15.3 US gal,
12.8 Imp gal)
Remote fuel-filler flap release
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

Page 6 of 29

When Driving
5
Starting the Engine
For details, refer to Section 4, “Start/Stop Engine”.
(SKYACTIV-D 2.2)
• The starter does not rotate until the glow indicator light turns off.
• When starting the engine, do not release the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) until the glow indicator light in the
instrument cluster turns off and the engine starts, after pressing the push button
start.
1. Make sure the parking brake is on.
2. Continue to press the brake pedal firmly until
the engine has completely started.
3. (Manual transaxle)
Continue to press the clutch pedal firmly until
the engine has completely started.
(Automatic transaxle)
Put the vehicle in park (P). If you must restart the
engine while the vehicle is moving, shift into
neutral (N).
4. Press the push button start after both the KEY indicator
light (green) (if equipped) in the instrument cluster and
the push button start indicator light (green) illuminate.
• If the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) is
released before the engine starts, depress the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) again and press the push button start to
start the engine.
• If the ignition is left switched ON for a long period of time without the engine
running after the glow plugs are warmed up, the glow plugs may warm up again
which will illuminate the glow indicator light.
Push button start
Indicator light
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

Page 7 of 29

6
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
Operation of i-stop Function
The i-stop function automatically stops the engine when the vehicle is stopped at a
traffic light or stuck in traffic, and then restarts the engine automatically to resume
driving. The system provides improved fuel economy, reduced exhaust gas
emissions, and eliminates idling noise while the engine is stopped.
Engine idle stopping and restarting
NOTE
• The i-stop indicator light (green) turns on under the following conditions:
• When engine idling is stopped.
• The i-stop indicator light (green) turns off when the engine is restarted.
Manual transaxle
2. While depressing the clutch pedal, shift the shift lever to the neutral position.
Engine idling stops after the clutch pedal is released.
3. The engine restarts automatically when the clutch pedal is depressed. 1. Stop the vehicle by depressing the brake pedal and then the clutch pedal.
Automatic transaxle
2. The engine restarts automatically when the brake pedal is released with the
selector lever in the D or M position (not in second gear fixed mode).
3. If the selector lever is in the N or P position, the engine does not restart when
the brake pedal is released. The engine restarts when the brake pedal is
depressed again or the selector lever is shifted to the D, M (not in second gear
fixed mode) or the R position. (For the purposes of safety, always keep the
brake pedal depressed when shifting the selector lever while engine idling is
stopped.) 1. Engine idling stops when the brake pedal is depressed while the vehicle is
driven (except for driving in the R or M position second gear fixed mode) and
the vehicle is stopped.Engine idling stop conditions are met while the vehicle is being driven. • (Except European model)
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

Page 8 of 29

7
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
i-stop OFF Switch
By pressing the switch until a beep sounds,
the i-stop function is turned off and the i-stop
warning light (amber) in the instrument
cluster turns on. By pressing the switch again
until the beep sounds, the i-stop function
becomes operational and the i-stop warning
light (amber) turns off.
i-stop Warning Beep
If the driver's door is opened while engine idling is stopped, the warning sound
operates to notify the driver that engine idling is stopped. It stops when the driver's
door is closed.
i-stop indicator light (green)/i-stop warning light (amber)
i-stop indicator light (green)
• When the engine idling is stopped.
Engine idling stop conditions are met while the vehicle
is being driven.
• The light turns on when the ignition is switched ON and
turns off when the engine is started. i-stop warning light (amber)
• The light turns on when the i-stop OFF switch is
pressed and the system is turned off. • (Except European model)
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

Page 9 of 29

8
When Driving
For details, refer to Section 4, “Instrument Cluster and Display”.
Warning/Indicator Lights
Signal Warning/Indicator Lights
1
2
3
4
7
8
9
10
11
12Brake System Warning Light Master Warning Light
ABS Warning Light
Charging System Warning
Indication/Warning Light
Engine Oil Warning Light
Check Engine Light
High Engine Coolant Temperature
Warning Light (Red)
i-stop Warning Light
(Amber)/Indicator Light (Green)
14
17
18
19Automatic Transaxle Warning
Indication
Power Steering Malfunction
Indication
20Air Bag/Front Seat Belt Pretensioner
System Warning Light
Low Fuel Warning Light
21Seat Belt Warning Light
22
2327
28
29
35
36
38
40Tyre Pressure Monitoring System
Warning Light
KEY Indication
High Beam Control System (HBC)
Warning Light (Amber)/Indicator
Light (Green)
TCS/DSC Indicator Light
TCS OFF Indicator Light
Low Engine Coolant Temperature
Indicator Light (Blue)
41
42
43
44
45Shift Position Indication
Headlight High-Beam Indicator Light
Direction indicator/Hazard Warning
Indicator Lights
Security Indicator Light
49
Cruise Main Indicator Light (Amber)/
Cruise Set Indicator Light (Green)
Lights-On Indicator Light
51Front Fog Light Indicator Light
Rear Fog Light Indicator Light
52Signal Warning/Indicator Lights
Warning (Display Indication)
Some of the warning/indicator lights are displayed in the instrument cluster.
If a warning/indicator light is displayed in the instrument cluster, verify the
meaning of the warning in the Warning (Display Indication) item.
Glow Indicator Light
Diesel Particulate Filter Indication
Wrench Indication31
32
33
Vehicle Speed Warning Indication
34Low Ambient Temperature Warning
Indication
Low Washer Fluid Level Warning
Indication 25
Mazda Radar Cruise Control
(MRCC) Warning Light
(Amber)/Indicator Light (Green) 46
24
Electric Parking Brake Indicator Light
Electric Parking Brake Warning Light
Lane-Keep Assist System Indication
Lane-Keep Assist System OFF Indication
Lane Departure Warning System
(LDWS) Indication
Lane Departure Warning System
(LDWS) OFF Indication
4WD Warning Indication
Door-Ajar Warning Indication
Liftgate-Ajar Warning Indication
Adaptive LED Headlights Warning
Light (Amber)/Indicator Light (Green)
Smart Brake Support/Smart City Brake
Support (SBS/SCBS) OFF Indicator Light
Smart City Brake Support (SCBS)
Warning Indication
i-ELOOP Indication
Select Mode Indication
Blind Spot Monitoring (BSM) OFF Indication
LED Headlight Warning Light 5
6
13
15
1630
37
39
47
48
50120 km/h Warning Light
26
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

Page 10 of 29

When Driving
9
Automatic Transaxle Controls
Various Lockouts:
Indicates that you must depress
the brake pedal and hold in the
lock-release button to shift (The
ignition must be switched ON).
Indicates the selector lever can be
shifted freely into any position.
Indicates that you must hold in
the lock-release button to shift.
Drive Selection Switch
Drive Selection
Drive selection is a system to switch the vehicle's drive mode. When the sport mode
is selected, vehicle's response against accelerator operation is enhanced. Use the
sport mode when higher vehicle response is required such as merging onto
expressway or accelerating to overtake.
2. Pull the drive selection switch to the side
(backward) to cancel the sport mode.
1. Press the drive selection switch to the
side (forward) to select the sport mode.
Select Mode Indicator Light
When the sport mode is selected, the select mode
indication turns on in the instrument cluster.
For details, refer to Section 4, “Transaxle”, “Drive Selection”.
Lock-release button
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

Page:   1-10 11-20 21-30 next >